Produse pentru magnet din (1618)

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10AG-vM3x7 D mm:10 +0.1/ -0.1 H mm:4.5 +0.2/ -0.1 L mm:7 +0.5/ -0.5 Thread M:M3 Force* N:Weight g Weight g:Temperature °C Temperature °C:200

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-NdAv D mm:6 +0.1/ -0.1 d mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 L mm:11.5 +0.2/ -0.2 Thread M:M3 Temperature °C:80

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130NdSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Bar magnet NdFeB, steel body, zinc coated Article number:S4Nd D mm:4 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:15 Force* N:2.5 Temperature °C:80

Bar magnet AlNiCo, steel body - with internal thread Article number:S6G D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 Thread MxL:M3x5 Force* N:Weight g Weight g:Temperature °C Temperature °C:450

The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes Article number:MS130HFSo00rh00 L mm:130 B mm:145 H mm:75 Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25-NdDvM4 D mm:25 +0.1/ -0.1 d mm:4.5 H mm:7 +0.2/ -0.2 Thread M:M4 Force* N:160 Weight g:24 Temperature °C:80

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A18D-KsM4 D mm:18 Thread M:M4 Force* N:25 Temperature °C:60

Magnetic system with stainless steel body and strong neodymium magnet core. This series have a deeper magnetic force than the classic flat pot systems. Two milled surfaces on the perimeter allow to fix the system with a tool. The holding surface is over molded with a hard type of rubber (TPE) and protects the magnet from strikes. At the same time the rubber effects a noise absorption. Article number:FG013NdAG06rh00 D mm:13 +0.2/ -0.2 H mm:16 +0.2/ -0.2 Thread MxL:M6x10 SW mm:11 b mm:Force* N Force* N:15 Weight g:13 Temperature °C:80

Bar magnets AlNiCo, steel body, zinc coated Article number:S6 D mm:6 +0.1/ -0.1 H mm:20 +0.2/ -0.2 A¹ mm:12 Weight g:4.5 Temperature °C:450

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F10-NdCv D mm:10 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 d1 mm:2.6 +0.1/ -0.1 d2 mm:5.2 +1/ 0 Force* N:19 Weight g:Temperature °C Temperature °C:80

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F6-SCBv D mm:6 +0.1/ -0.1 H mm:4.5 +0.1/ -0.1 Temperature °C:200

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F50C-4016 D mm:50 +0.2/ -0.1 H mm:10 +0.5/ -0.2 d1 mm:8.5 +0.2/ -0.2 d2 mm:22 Force* N:145 Weight g:85 Temperature °C:220

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25D-vM4 D mm:25 +0.1/ -0.1 H mm:7 +0.3/ -0.2 K mm:5.2 Thread M:M4 Force* N:36 Weight g:18 Temperature °C:200

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KsM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » no nickel – no allergy » attractive design » grip edge for easy detachment » magnets are protected and do not break (possible in case of raw magnets) » usable on both sides (for example for paperclips, pens, scissors) » top / bottom colour mix Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » higher holding force Article number:OM025NdRd00 D mm:25 Packaging unit:5 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KwM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Systems for plugging into a groove that keep using locking lug without additional fastening. Article number:MBS56x12x12 H mm:12.2 L mm:56 l mm:53 B mm:12 b mm:11 t mm:2.2 Force* N:85 Weight g:24 Temperature °C:60

EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65. Max. Operating temperature 60°C Standard voltage 24,48,110V DC Protection class IP 53 ED 100%

FXE Elektro-Permanent Lasthebemagnete von Flaig Magnetsysteme setzen seit über 20 Jahren Standards. Elektro-Permanent Lasthebemagnete sind die beste Wahl wenn: die zu bewegende Last für Permanentmagnete zu groß ist der Lasthebemagnet ergonomisch bedient und gesteuert werden muss die Geometrie der Last nicht zu Permanentmagneten passt der Lasthebemagnet ferngesteuert und eventuell lastregulierbar sein muss die Traglast im Verhältnis zur Materialstärke für Permanentmagnete zu groß ist

Permanent magnetic chucks type PMNEO are super strong, compact plates for heavy cutting. Parts from about 30x15x6mm can be stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. Optional pole blocks can be built on the PMNEO. This allows turning up the workpiece so that all sides are freely accessible, can be drilled on the magnetic clamping plate and leaves more space for accumulating chips around the component. This allows long-running HSC milling-pieces never sink into the resulting chips. The chipboard is activated via a removable hex shifter. The PMNEO magnetic clamping plate, in 48mm height, is prepared to integrate reference elements directly into the magnetic chuck, so that no additional spectrum is required underneath the magnet.

The systems will be delivered inclusive a suited counterpiece. The coating has a rubber cap for damping function and aesthetic improvement. Article number:MBS12x12 D mm:12 L mm:12.5 Weight g:12.5 Temperature °C:60

FX-VV HOT for hot parts. A special permanent magnet system allows working temperatures of up to 300°C for a maximum of 5 minutes and of 250°C permanently. Ideal for moving heated tools and dies, or heat-treated workpieces. The FX-VV HOT holds what others drop. We offer a wide range of Permanent Lifting Magnets.

FXE-TT telescopic trusses are equipped with electro-hydraulic telescopic arms and are suitable for handling sheets of 3-16m length. The system consists of fixed and movable crossbars, each equipped with two magnetic modules. The length of the truss can be adjusted individually via radio remote control. The magnetic system can be operated on the truss itself or on the radio remote control included in the delivery.

FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is conceived to pick up beams and profiles, also on the inner web of the beam, and reach their maximum holding force even with comparatively thin material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be can now be picked up on the inside and outside, or components can be turned. Steel fabricators rely on FX-VV.

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.

Magnetic door catch, with round contact poles and a... Article number:MTS60x32x25-Nd L mm:60 l mm:16 B mm:25 b mm:15.5 d2 mm:5.5 W mm:46.5 Force* N:150 Weight g:71 Temperature °C:60

FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.

FXE-R electro-permanent lifting magnets that can lift round material or, both round and flat material, we manufacture from our FXE basic models with pole shoes that can lift the customized diameter band widths, individually or in layers. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FX-C lifting magnets have a round, multipole clamping surface, designed for lifting rings, sleeves, bearing housings, flange plates and similar workpieces.The load specification is valid for full-surface mounting on workpieces which cover D inside to D outside (see table Dimensions), for workpieces with a smaller mounting surface an approximate maximum workpiece weight of 3.5 kg per cm² clamping surface can be calculated. For serial workpieces, a documented test should confirm the safety factor 3.