Produse pentru lanț pentru (124)

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-30 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):240 mm²/s Coefficient of friction SRV (DIN 51834-2, 50 °C):µ = 0.125

Intelligent Chain Monitoring - Gives maintenance staff time to (re)act! - No long downtimes for plant or machinery - No risk to promised delivery dates -no interruption of the logistics chain - Prevents financial losses caused by missed production - Monitoring of precision chain applications - "Plug 'n' play" principle applies – does not require calibration etc.

The GP 150 consists of a modular cage system with variable width and height for large profile channels (circular, egg, box profiles as well as profiles with dry weather channel). It is designed to enable the user to process a corresponding profile size with as few components and assembly work as possible. With only five plug-in connections and three screw connections, a maximum body size of DN 4,000 can be achieved. up to 150 bar:1"-1 1/4" DN 150 - DN 4000:6"-160"

Roller chains with elastomer profiles are ideal for applicationswhere fragile goods require gentle conveyor handling. ELITE chains are used for transporting goods that should not be scratched, such as coated or thin sheet metal, planed timber planks or pipes. The material iwis uses for the ELITE product range is nitrile butadiene rubber (NBR) with a hardness of 80 Shore A. NBR offers the optimum combination of cohesive friction, abrasion resistance and durability. Other profile types are possible for special applications and can be supplied on request. ELITE highlights: • All ELITE chain plates 1 are tapered and shot-blasted; production processes such as fine blanking and ball-drifting ensure a particularly high contact ratio • Seamless, cold-extruded, shot-blasted rollers 2 with extremely regular wall thickness • The standard rubber profile 3 is nitrile butadiene rubber (NBR) with a hardness of 80 Shore A.