Produse pentru lanț pentru (15)

Je nach Anwendungszweck liefern wir in Absprache: Ölgeschmierte Ketten mit geteiltem Endglied für besonders hohe Standzeiten und geringen Arbeitsaufwand beim Austausch der Ketten

Rundketten - Produktkatalog auf Anfrage Rundstahlketten DIN 5685, DIN 763, DIN 762, DIN 764, DIN 5684 und DIN 32891 Anschlagketten DIN 5688 Knotenketten DIN 5686

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection Also available as spray version OKS 3571 MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0.87 g/ml Viscosity (40 °C):300 mm²/s

Im Formenbau fertigt toolcraft vom eigenen Stamm- bis zum Serienwerkzeug auch Formaufbauten in Lohnfertigung. Von der Elektrodenfertigung und -vermessung, Draht- und Senkerosion bis zur Einsatzkomplettbearbeitung sind alle Leistungen des Formenbaus auch exklusiv nutzbar.

Titanikherzkette Erbskette rhodiniert

Besonders geräusch- und vibrationsarme Ketten mit AVT-Technologie schonen die Laufwerke Ihrer Maschinen und die Gesundheit der Fahrer. Tests ergaben bis zu 75% weniger Vibration als bei Standardketten ohne AVT-Technologie. AVT-Ketten besitzen eine einzigartige, rautenförmige Laufrollenführung. Diese bewirkt, dass die Laufrolle einen nahezu ebenen Weg befahren kann. Die Vibrationen, die durch die Bewegung der Laufrolle über die einzelnen Kettensegmente entstehen, werden auf ein Minimum reduziert. Diese Technologie ist die wichtigste Entwicklung seit Jahren in der Branche! Diese Ketten werden vorzugsweise bei Minibaggern eingesetzt.

Rollenketten werden hauptsächlich als Antriebselement zwischen parallelen Wellen und durch die Vielzahl von Anbauelementen als Transport- und Förderketten verwendet. Der Wirkungsgrad eines optimalen Kettentriebes liegt bei 98%. Der Nachteil der Kette – der Zwang der Schmierung und dadurch entstehender Wartungsintervalle entfällt durch die TSUBAKI-Lambda-Rollenkette. Die wichtigsten Abmessungen der Lambda-Kette entsprechen DIN 8187 und DIN8188. Durch die Verringerung der Wartungszeit entstehen wirtschaftliche Vorteile und durch den Wegfall des Schmierstoffes wird die Umwelt gleichzeitig entlastet. Lieferbare Ketten: Rollenkette DIN 8187/8188 in unterschiedliche Materialien, mit Winkel- und Mitnehmerlaschen, einfach und mehrfach, wartungsfrei, korrosionsbeständig Miniaturkette Poly-Stahl-Ketten mit Innengliedern aus Polyacetal Hohlbolzen- und kurvengängige Ketten Fleyerketten für Gabelstapler Rotary-Ketten Stauförderketten Tragrollenketten, Seitenrollenketten

Zahnketten - Produktkatalog auf Anfrage werden sowohl in der Antriebstechnik als auch im Transportbereich vor allem in der Flach und Hohlglas Herstellung eingesetzt. Unsere Zahnketten bieten volle Austauschbarkeit mit Zahnketten anderer Hersteller. Hochleistungszahnkettenräder mit induktiv oder flammgehärteten Zahnflanken, in Stahl oder Guss (GG/GGG).

Scharnierbandketten - Produktkatalog auf Anfrage werden zum Transport verschiedenster Produkte eingesetzt. geradgängig kurvengängig Stahl und nichtrostender Stahl, Edelstahl Kunststoff: POM Acetal und Spezialmaterialien Scharnierbandketten lieferbar mit Gummiauflage, mit Nocken, mit Mitnehmer, als Vakuumkette und vieles mehr.

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0,87 g/ml Viscosity (40 °C):300 mm²/s

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Operating temperature:-30 °C → +180 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):440 mm²/s Four-ball test rig (welding load):2,600 N

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Operating temperature:-30 °C → +180 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):440 mm²/s Four-ball test rig (welding load):2,600 N

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Operating temperature:-30 °C → +200 °C Base oil viscosity (40 °C):300 mm²/s Four-ball test rig (welding load):2,400 N

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451 Operating temperature:-30 °C → +200 °C Base oil viscosity (40 °C):300 mm²/s Four-ball test rig (welding load):2,400 N

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions Operating temperature:-30 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):240 mm²/s Coefficient of friction SRV (DIN 51834-2, 50 °C):µ = 0.125