Produse pentru imagini (23)

Knight Optical can offer Barium Fluoride Windows for use within Medical Imaging. We supply a range of barium fluoride windows for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers in the medical industry for applications such as medical thermology and thermography. Barium fluoride optics are used in the detection and screening of breast cancer and for screening for atypical pneumonia (SARS) and monitoring respiratory conditions. Due to barium fluoride’s high radiation resistance, it is ideal for use in high radiation (x-ray/gamma rays) environments. Other applications include cryogenically cooled thermal imaging systems, infrared spectroscopy and high energy neutron detection. Read PDF for more information… Material::Barium Fluoride (BaF2) Shape::Circular Windows, Square Windows Dimensional Tolerances::+/- 0.1mm Parallelism::< 3 arcminutes Surface Quality: :<60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

Tesla are committed to the design, supply and field support of pre-clinical gradient coils for new and existing MR systems. Tesla have a complete range of state-of-the-art gradient coil designs from pre-clinical imaging through to ultra wide bore with virtually all magnet and amplifier combinations. New designs are available rapidly and on request. ** Click for more **

Andor’s spectrograph family is based on Czerny-Turner, Echelle or Transmission optical designs, and offers a range of highly configurable or highly specialised platforms to best suit your experimental requirements Andor’s Kymera 193i spectrograph has been designed with research-grade performance, versatility and ease of use in mind. The ‘intelligent’ motorized adaptive focusing allows access to the very best spectral resolution performance in any configuration with un-matched repeatability. - Adaptive Focus technology (patent WO2016012794 A3) - Motorized dual-grating turret - Astigmatism-corrected optical design - Dual detector outputs - USB interface ** Click to request pricing **

Branding one van or a whole fleet of vehicles? No problem! We can produce printed and cut vinyl liveries for vans, lorries, cars, boats and planes! We use high quality cast vinyls warranted against shrinkage and fading. We fit the vinyl ourselves or we can supply fitting kits. Complete or partial vehicle wraps and magnetic panels are also available.

Stable solution of the seven most common brain metabolites at physiological pH and concentrations. Two sizes available: 18cm and 11cm diameter spheres. Assess the performance and reproducibility of both standard and edited Magnetic Resonance Spectroscopy sequencees. he SPECTRE (Spectroscopy Reference) phantom is designed for Quality Assurance measurements of Magnetic Resonance Spectroscopy (MRS). It contains a set of metabolites found within the brain at physiological concentrations and pH, all housed within a HDPE spherical shell. Up to 30 SPECTRE phantoms can be made from the same batch, providing identical phantoms for use in multi-centre studies. SPECTRE uses a set of metabolites typically used in MRS QA; with the addition of GABA (gamma-Aminobytyric acid) at 2mM, to allow performance testing of both standard (e.g. PRESS, LASER) and J-edited (e.g. MEGA-PRESS) MRS acquisitions.

The Fire Thermal Infrared (FireTIR) detection system is based on fixed infrared cameras which measure the viewed surface temperatures in real time and connect to a user friendly software interface.

Knight Optical offer a range of Stock N-BK7 Precision Grade Windows, for use with Thermal Imagining Cameras. Infrared radiation is characterised by the wavelengths ranging from 750nm to 1000µm. Although typically used for the visible range, N-BK7 does have transmission within the near infrared spectrum also. Where IR materials such as Germanium are limited to a small band in the IR spectrum, N-BK7 works well throughout the entire visible and into the NIR, making it a perfect material for a protective window for using within a Thermal Imaging Camera. A low cost material, it is perfect substrate for your protective window. We can supply both stock and custom N-BK7 windows to protect your thermal imaging application. The high optical quality and uniform transmission of N-BK7 as well as low absorption in the entire visible wavelength range is a key feature for this application. For more information read PDF Material::N-BK7 or Equivalent Diameter Tolerance::+0.0/-0.15mm Length/Width Tolerance::±0.1mm Thickness Tolerance::±0.1mm Flatness::>λ/4 over 90% aperture Surface quality::<40/20 Scratch/Dig Parallelism::1 arc minute Coating::Windows with the suffix “AV2” are coated on both faces with our extended broadband multilayer antire

Frenesal lenses for Retinal Imaging in materials PMMA Acrylic & Borosilicate - Knight Optical can offer you Stock and Custom Fresnel Lenses, for use within Retinal Imaging in a range of materials such as PMMA Acrylic and Borosilicate. Our Fresnel Lenses consist of a flat surface with interspace concentric steps whereby each step corresponds to the surface of a conventional lenses. PMMA Acrylic is a preferred material type used for retinal imaging Fresnel lenses. The Fresnel lenses are used as part of a system where its multi-focal length provide a multiple in and out of focus image that provide a magnified image of the human eye itself. For more information view PDF data sheet.... Material::PMMA acrylic Center thickness::+/- 0.2mm Center thickness::Nominal Standard range::± 5% Precision range::± 2% typically (± 5% manufacturing data) Design condition::Parallel light on grooved side

Knight Optical are very experienced within the Thermal Imaging market, including anti-reflective and diamond-like-carbon coatings used on the optical components in these systems. Knight Optical know exactly what you are looking for. Thermal imaging uses infrared materials such as Germanium and Silicon, however in there raw form the transmission is not the best it could be. For example, Germanium typically transmits at <45% but with an AR coating applied, it can improve transmission to >60%. This increase in transmission means that the camera sensor receives a better signal through the protective window. Also with protective windows, we can provide high quality DLC coatings. We ensure the coating is Salt Fog Tested to MIL-SPEC standard to ensure that the coating withstands harsh environments. The coating has high mechanical hardness and high resilience to external stress. Read PDF for more information

Knight Optical offer a range of Stock Sapphire Windows, for use within Infrared Systems. Knight Optical can offer Sapphire (Al2O3) Optics for Infra-red systems over the waveband of 0.2 to 5µm. We offer Sapphire optics for UV, Visible, NIR (0.9 to 1.5µm) and Mid-Waveband Infra-Red (MWIR, 3 to 5µm) Imaging Systems. Sapphire has hardness of about HK2000, which makes it a better choice for windows and outer elements of lens systems. Sapphire has good transmission in the MWIR band, and can be used with optical glass in the NIR, and with Silicon or Germanium in the MWIR, to form well corrected doublets and lens systems. These systems include, for example, Forward Looking Infra-Red (FLIR) systems, and thermography. Al2 O3 has a refractive index of about 1.9288no 1.9174ne at 200nm through to 1.623no 1.615ne in the IR (5µm). This pairing will allow for the design and manufacture of a colour corrected lens that can be used in broad spectrum thermal imaging systems. Material::Sapphire (AL2O3) Diameter Tolerance::+0.0/-0.20 mm Length/Width Tolerance::+/- 0.10mm Thickness Tolerance::+/-0.10mm Wavelength Range::0.17 – 5.5µm Transmission::Tavg=85% dependant on substrate thickness

Knight Optical can offer Amici Roof Prisms for use within Imaging Industry. We supply a range of Amici Roof Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Imaging Industry. Amici Roof Prisms are often used in the development of telescope eyepieces and endoscopes, where they revert and invert the image while redirecting the beam by 90 degrees. For more information read PDF … Material::N-BK7 or equivalent, UV Fused Silica, Dimensional Tolerances::+/- 0.2mm Angles::+/- 30 arc seconds Surface Figure: :< 0.5 waves Surface quality::< 40-20 Scratch/Dig

Knight Optical can supply you with a custom made Diamond turned aspheric lenses for use within Thermal Imaging Cameras. We supply a range of diamond turned aspherics for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Thermal Imaging Cameras work similarly to traditional visible camera systems; while traditional cameras form images using visible light; thermal cameras form images using infrared radiation; operating in wavelengths as long as 14µm. Spherical aberration occurs in common singlet lenses, which results in an image that appears distorted, aspheric lenses correct spherical aberration. An aspheric lens surface is designed non-spherical, which allows a single component lens to collimate or focus highly divergent rays, Read PDF for more information… Material::Germanium, ZnSe, Caf2, Silicon, Zinc Selenide (For LWIR) Diameter::Up to 200mm dia +0, -0.02mm Thickness::+/- 0.2mm Flatness::< 1/2 wave over 90% aperture Surface Quality::< 40-20 scratch/dig Parallelism::5 arcmin Coating::AR/DLC (3-5 micron, 7-14 micron, 10-12 micron)

Germanium windows, in IR sensors, medical apps, pyrometry & IR imaging systems - Are you looking for a popular high refractive index and good IR transmission range material covering from 1.8-16µm? Here we are; Knight Optical’s Germanium glass material is ideal for your IR applications with its broad transmission range and opacity in the visible portion of the spectrum. Our Germanium windows are not only used in IR sensors, medical applications, and pyrometry; but also in IR imaging systems, and thermographic cameras. Typically operating in the 2µm to 14µm spectral range; that covers the LWIR (8-12μm) and MWIR (3-5μm) thermal imaging wavelength range. Our Germanium windows are available from stock, custom size and shape with Anti-Reflection coatings on one or both sides, and/or with Hard Carbon Diamond coatings. Read our PDF for more details... Material::Germanium Diameter Tolerance::Up to 300mm +0, -0.02mm Thickness Tolerance::+/- 0.2mm Flatness::< 2 waves over 90% aperture Surface quality::< 40-20 scratch/dig Parallelism::5 arcmin Coating::AR/DLC (Diamond like coating @ 7-14 micron)

Knight Optical can offer Custom Homogenizing Rods for use within Fluorescence Imaging. Knight Optical supply precision optical components to customers in the medical industry for applications such as fluorescence illumination, microscopy and imaging. Homogenizing Rods are used within the application of surgical procedures; within systems designed to help identify which tissues have been exposed to the fluorescent indicator. The Light source will enter a light pipe at a variety of incident angles, which is designed to utilise its total internal reflection to channel the light from the entrance of the light pipe to the exit. The material’s refractive index is the only factor which affects the light pipes critical angle; this defines the angle of acceptance which the total internal reflection will occur at. With this it helps to control the light source being used in medical systems. Read PDF for more info Material::BK7, UVFS or Other Optical Glass Length Tolerance::+/- 0.3mm Aperture Tolerance::+/-0.1mm Surface quality::<60-40 Scratch/Dig Coating::Optional

Reliable supplier of Domes for underwater ROVs for surface & deep water - Knight Optical has successfully launched a range of Stock Optical Domes for Submersible ROVs underwater imaging, sensing and exploration applications, where protection of electronic sensor systems from harsh liquid and gas environments is essential. A dome is essentially a window that has two parallel curves faces. Our domes ensure high clarity and transmission in the UV-NIR and FarIR spectrums allowing for accurate measurement. Knight Optical is a trusted, established and reliable supplier to manufacturers of underwater ROVs for surface and deep water exploration. With our excellent record delivering quality, metrology tested optical domes & windows; we like to think we are your best solution for custom ROV dome and window solutions. Our products are used by satisfied customers in the ROV industry worldwide. Contact our experts and find out why! For more information read PDF

Knight Optical can offer Rhomboid Prisms for use within Imaging Applications. We supply a range of Rhomboid Prisms for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. Knight Optical supply precision optical components to customers within Imaging Applications. Rhomboid Prisms are designed to displace a beam laterally while maintaining its direction. Rhomboid prisms rely on total internal reflection and so do not often need to be coated For more information read the PDF… Material::N-BK7 or equivalent Dimensional Tolerances::+/- 0.2mm Angles::+/- 3 arc minutes Surface Figure::< 1 waves Surface quality::< 40-20 Scratch/Dig Coatings::< AR Coatings available on request

Aspherics with a range of infrared materials incld Ge, CaF₂, ZnS, ZnSe, & Al - We can supply you with a custom made Diamond turned aspheric lenses for use within Thermal Imaging Cameras. Thermal Imaging Cameras work similarly to traditional visible camera systems; while traditional cameras form images using visible light; thermal cameras form images using infrared radiation; operating in wavelengths as long as 14µm. Spherical aberration occurs in common singlet lenses, which results in an image that appears distorted, aspheric lenses correct spherical aberration. An aspheric lens surface is designed non-spherical, which allows a single component lens to collimate or focus highly divergent rays, potentially replacing a multi-lens system. This in turn provides the camera system with a better image quality. Knight Optical offers diamond turned aspherics from a range of infrared materials including Germanium (Ge), Calcium Fluoride (CaF₂), Zinc Sulphide (ZnS), Zinc Selenide (ZnSe), Aluminium (Al) and chalcogenide glasses like AMTIR (Ge33As12Se55 ) PDF FOR INFO Material::Germanium, ZnSe, Caf2, Silicon, Zinc Selenide (For LWIR) Diameter::Up to 200mm dia +0, -0.02mm Thickness::+/- 0.2mm Flatness::< 1/2 wave over 90% aperture Surface quality::< 40-20 scratch/dig Parallelism::5 arcmin Coating::AR/DLC (3-5 micron, 7-14 micron, 10-12 micron)

Knight Optical can offer you stock and custom lambda/10 mirrors for use in imaging applications, in a range of materials such as BK7 or equivalent, Zerodur, Quartz, UV Fused Silica and many more. Mirrors are made from low expansion glass for optimum stability to maintain the lambda/10 flatness. The mirrors help produce high quality images and can be coated with a variety of coatings to ensure that the perfect quality image in the wavelength you require is achieved: •Enhanced aluminium 94%R for visible applications. •99.9% dielectric for laser use in visible applications. •UV aluminium for UV applications down to 180nm. •98.5% dielectric for laser use in the NIR applications. •Ion plated silver for NIR-2000nm applications. •Protected gold for 750nm to far infra-red applications Lambda/10 mirrors are used to produce a better quality signal from the mirror, resulting in a higher quality imaging. Read PDF for more information… Material::N-BK7 (or equivalent), Zerodur, UV Fused Silica, Borosilicate Shape::Circular, Square or rectangular Dimensional Tolerances::+/- 0.5mm Parallelism::< 3 arcminutes Surface quality::<10-5 Scratch/Dig Flatness:: λ/10 or λ/20 over 90% of mirror aperture Coating::A range of mirror coatings to suit your wavelength

IR materials Germanium Calcium Fluoride Zinc Sulphide Zinc Selenide Aluminium - Diamond turning is an Aspherics best friend! Knight Optical can supply you with a custom made Diamond turned aspheric lenses. Diamond turned aspheric optical lenses are typically used in missile guidance systems, night vision/thermal Imaging cameras and other military based optics and commercial infrared systems (IR). The benefit of Diamond Turned Aspheric optics, are that lens shapes can be manufactured very accurately without an expensive tooling cost except for the diamond bit; and is cost efficient for small quantities. Which are ideal for use within the Defence and Aerospace Industry. Knight Optical offers diamond turned aspherics from a range of infrared materials including Germanium (Ge), Calcium Fluoride (CaF₂), Zinc Sulphide (ZnS), Zinc Selenide (ZnSe), Aluminium (Al) and chalcogenide glasses like AMTIR (Ge33As12Se55 ). For more details read the PDF... Material::Germanium, ZnSe, Caf2, Silicon, Zinc Selenide (For LWIR) Diameter::Up to 200mm dia +0, -0.02mm Thickness::+/- 0.2mm Flatness::< 1/2 wave over 90% aperture Surface quality::< 40-20 scratch/dig Parallelism::5 arcmin Coating::AR/DLC (3-5 micron, 7-14 micron, 10-12 micron)

Knight Optical can offer Barium Fluoride Optics for use within Medical Imaging. We supply a range of Barium Fluoride Optics for a range of applications. All individually QA checked and metrology tested for quality to ensure parts meet customer specification. Supplied in a range of sizes and shapes with custom coatings tailored to meet your individual applications. We supply precision optics to customers in the medical industry for applications such as medical thermology and thermography. Barium fluoride optics are used in the detection and screening of breast cancer and for screening for atypical pneumonia (SARS) and monitoring respiratory conditions. Due to barium fluoride’s high radiation resistance, it is ideal for use in high radiation (x-ray/gamma rays) environments. Other applications include cryogenically cooled thermal imaging systems, infrared spectroscopy and high energy neutron detection. For more information read PDF… Material::Barium Fluoride (BaF2) Shape::Spherical Lenses, Aspheric Lenses, Windows, Prisms Dimensional Tolerances::+/- 0.1mm Centering::< 3 arcminutes Surface quality::< 60-40 Scratch/Dig Coating::Antireflective coatings for application bandwidth (if required)

The use of a head gradient coil insert together with a whole body gradient coil allows for higher gradient strength and potentially higher stimulation limits. The use of a head gradient coil insert can result in higher resolution imaging, in particular of the inner ear. (Head gradients are used in combination with Whole body gradients within MRI systems for superior imaging). Important factors in head gradient coil design are: - Design of the head gradient coil insert's magnetic field to match the whole body gradient's magnetic field, - Robust, durable and rigid construction to maintain a fixed position within the whole body magnetic field, - Efficient cooling of the head gradient. ** Click for more **

Tesla design and manufacture a complete range of state-of-the-art gradient coils for clinical imaging, from value systems through to ultra wide bore and ultra high field MRI. We have products for virtually all magnet and amplifier combinations with new designs available on request. The existing MFC and HFC range, comprises over 40 whole body gradients offering the following specifications: - Up to 9.4 T. - Up to 800 mm gradient bore diameter. - Fit all magnets, including: Tesla, Philips, Siemens, Melco, Alltech, Ningbo Jianxin, Chenguang. - Operate with most amplifiers, including: Analogic; PCI; Siemens; Prodrive. - Integrated RF screen (optional). - Lorentz force minimised. - Ultra low eddy currents. ** Click for more **

Planar gradients for High Field Open (HFO) Magnetic Resonance Systems. Tesla design and produce a range of planar gradients for application in OEM High Field Open Magnetic Resonance Imaging (MR) systems where patients are imaged between two large plate magnets in an area that can be three times larger than in cylindrical systems. HFO MR or Open MRI systems are widely used in health care, since they can accommodate large patients and those who would otherwise experience claustrophobic reactions in a more comfortable and relaxed environment. ** Click for more **