Produse pentru folosit (160)

SE2350 singleend Type 30® roving is designed for applications requiring high strength, efficient processing and demanding fatigue life. Maximum strand integrity results from uniform distribution of a proprietary sizing system ensuring excellent resintoglass binding. EXCELLENT PROCESSING Smooth runout from lower drag across contact points produces less fuzz, resulting in smoother parts, less cleanup, and improved machine efficiencies. FAST WETOUT WITH REDUCED COST Fast, uniform strand wetout leads to higher glass loading and good adhesion with reduced resin in both amine and anhydride cured epoxy resin systems. This results in optimized part production speed and increased productivity, reducing manufacturing costs. GOOD MECHANICAL PROPERTIES Excellent shear and tensile properties in both amine and anhydride resin systems; good laminate properties in burst, static, and cyclic fatigue provide maximum part strength and long part service life. STRAND TENSILES: ASTM D 2343:Amine/DER 331 Epoxy Resin STRENGTH (MPA):2240 STRENGTH (KSI):325 INTERLAMINAR SHEAR STRENGTH NOL RING: ASTM D 2344:Amine/DER 331 Epoxy Resin DRY SHEAR STRENGTH (MPA):64.4 DRY SHEAR STRENGTH (PSI):9340 SHEAR STRENGTH RETENTION 72 HR BOIL (%):95% YIELD:250 (16 and 22 micron) TEX:2000 (16 and 22 micron) MANUFACTURING REGION:North America

M6X1 chopped strand mat represents a compelling solution for large and thick part manufacturing when high productivity is required in hand layup or closed mold processes. EASY HANDLING AND MOLDABILITY Optimized chop length mix provides superior dry tensile strength while bringing good conformability to contoured molds. HIGH PROCESS EFFICIENCY Fast wetthrough and low resin pickup combined with excellent handling properties in dry and wet conditions. This makes the product an ideal choice for large and thick parts production with dry and wetcarrying process. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. HAND LAY UP CLOSED MOLDS M6X1 mat is designed for use with polyester, vinyl ester resin systems inhand layup or closed mold applications including automotive parts, boats, chemical tanks and pools. (Picture copyright nostal6ie, shutterstock.com. For application illustration only.) NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 – 600 ROLL WIDTH (CM):95 - 125 ROLL Ø (CM):30 ROLLS PER PALLET:12 PALLET SIZE (CM):127x97

Owens Corning surfacing glass NonWovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability and preventing tiles from curling and shrinking.

790C wet use chopped strand (WUCS), featuring Advantex® glass fibers, is specifically designed for higherfeed rate processes in dry feed applications. EXCELLENT FIRE/FLEXURAL STRENGTH Engineered to provide fire resistance performance and meet regional building codes. Improves flexural strength of wallboards for ease of handling and installation. High strength characteristics to enhance abuse resistant wallboard systems. EFFICIENT PROCESSING Designed to improve higherfeed rate processes where the uniform glass dosage rate and dispersion reduces feed flow variations and causes clumps. ENHANCED GLASS FIBER CHARACTERISTICS Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass. PHYSICAL PROPERTY:Softening Point ADVANTEX(R) GLASS:916 °C TRADITIONAL E-GLASS:850 - 870 °C MOISTURE CONTENT:5.3 - 8.3% % STRAND SOLIDS LEVEL:.14 - .22% FIBER DIAMETER:14.4 - 17.6μ

OptiSpray® F Roving represents a compelling solution for fabricators that want to save time and resin while increasing the performance of their products. INCREASED EFFICIENCY Low fuzz combined with easy chopping, flat lay down and uniform dispersion saves time. REDUCED COST Higher glass loading with optimal resin consumption reduces the amount of expensive resin required. GREAT PERFORMANCE Good mechanical properties, great surface quality, excellent conformability, doesn't trap air, low spring back. FAST WETOUT Designed to provide optimal performance for sprayup applications where fast wetout speed is preferred; great performance in various types of part complexities. Owens Corning also offers Technical Support, which focuses on trouble shooting and increased productivity for our customers.

M705 chopped strand mat represents a compelling solution to hand lay up high glass content and thin laminates balanced with good mechanical properties. EASY HANDLING & MOLDABILITY Optimized chop length mix provides good confirmability to complex contoured molds. PROCESS EFFICIENCY Fast wetting and quick air release help reduce the labor required to roll out the part. BALANCED PERFORMANCES Moderate impregnation speed reduces resin consumption, resulting in thinner laminate with high glass content, and improved mechanical properties. ENHANCED SERVICE LIFE Compared to standard Eglass, Advantex® glass helps with enhanced service life in applications facing corrosion. M705 mat is designed for use with unsaturated polyester, vinyl ester resin systems in hand layup applications including automotive parts, boats, chemical tanks and pools. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 375 - 450 - 600 ROLL WIDTH (CM):95 - 104 - 125 NOMINAL MAT WIDTH (CM):95 -104 -125 ROLL DIAMETER (CM):30 ROLLS PER PALLET:12 PALLET SIZE (CM):127 x 97

Introducing higher performance composites by Owens Corning more modulus, more benefits, more opportunities. This new higher performance glass provides a boost in mechanical properties enhancing part performance or cost optimization through redesign. Reduce the weight of pultruded parts by up to 8% by using higher modulus glass, saving material cost. Improve performance by up to 15% in axial tensile strength for helically wound pipe compared to reference products. The glass can be used in high temperature muffler applications due to an annealing point increase of 25 30°C compared to current products. Higher modulus can enable fiberglass rebar with modulus up to 70 GPa on straight bars. Properties previously unattainable on bent bars can now be achieved. Central strength members can be made 8% lighter, enabling increased fiber optic capacity in the cable. Reduce the weight of parts for automotive applications by up to 9%.

Unifilo® 500 Series continuous filament mats represent a large choice of tailored reinforcement solutions for efficient manufacture of high performance profiles by pultrusion process FREEDOM OF DESIGN AND WHITE COLOR U527 product easily adapts to complex die shapes and preserves part white color. U528X1 product offers a great balance between softness, white color and good tensile strength requirements. PRODUCTIVITY AND HIGH PERFORMANCE U528 product is easy to splice and enables excellent processability. It provides very good mechanical and dielectrical properties to molded parts U529 product higher tensile strength fits the requirement for most challenging profiles and fast pultrusion process speed. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. Unifilo®500 Series mats are available with varying binder contents to match up with specific customer applications NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 ROLL WIDTH (CM):127 - 138

OC Paneluxe™ multiend roving represents a compelling solution for panels where excellent translucency performance is required. Produced with patented Advantex® corrosion resistant ECR glass by Owens Corning and compatible with unsaturated polyester resins. EXCELLENT PROCESSING Designed for excellent processing at various line speeds, OC Paneluxe™ roving features easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static. With high impregnation and wetthrough characteristics, the product allows excellent resin flow in translucent applications. IMPRESSIVE AESTHETICS Excellent fiber distribution provides a homogeneous surface aspect with limited fiber prints, resulting in consistent thickness throughout the laminate. Absence of white fibers and fiber springback along with significant reduction of air entrapment ensures excellent translucency of laminates. LINEAR WEIGHT OF ROVING (TEX):2400 YIELDS (YDS/LB):207 LOSS ON IGNITION (%) ISO 1887:1995:0.65

Owens Corning surfacing glass nonwovens key product benefits are high strength performance, hot tensile and thermal stability, helping improved dimensional stability. They help carpet tiles preventing from curling and shrinking. In cushion vinyl flooring, they help improve manufacturing line speed, and installation with less breakage.

ME1510 represents a compelling solution for structural applications requiring high mechanical properties. This multiend roving product increases physical properties – enabling vehicle light weighting, increased fuel efficiency and lower CO2 emissions. EXCELLENT PROCESSABILITY Due to excellent wettability in epoxy and phenolic matrices, very high glass content is achievable, enabling excellent processability while compounding. OUTSTANDING MECHANICAL PROPERTIES Superior strength and flexural modulus enable light weighting in vehicles to increase fuel efficiency, lower CO2 emissions and increase range in electric vehicles. ENHANCED SERVICE LIFE Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. FIRE RESISTANT Compatible with phenolic resins used in fire resistance applications such as electric vehicles. HEIGHT (MM):254 NOMINAL WEIGHT (KG):20.5 LINEAR WEIGHT OF ROVING:2400 and 4800 TEX 207 and 103 Yeild LOSS ON IGNITION (%) ISO 1887: 1995:0.7 MOISTURE CONTENT (%) ISO 3344: 1997:≤ 0.10

Owens Corning® Milled Fibers are designed to enhance mechanical properties, increase stiffness, improve dimensional stability, and minimize distortion under elevated temperatures. EXCELLENT DISPERSION & IMPREGNATION Predispersed nature promotes excellent dispersion in the matrix. Shortfiber thermoplastic compounds will show improved melt flow characteristics with shorter input fiber lengths. IMPRESSIVE AESTHETICS Fiber length and excellent distribution qualities provide a homogeneous, highly pigmentable surface with limited fiber prints and good color. ENHANCED PART STRENGTH Glass reinforced parts exhibit improved mechanical properties, modulus and dimensional stability. Powder Relatively freeflowing with a high bulk density for use in formulations requiring very uniform dispersion and short fibers with median fiber lengths typically in the range of 40 110 microns.

U801/U809 continuous filament mats represent specific solutions to homogeneously reinforce expanded polyurethane foam. CUSTOMIZED FOR P U FOAM PROCESS U801/U809 specific design helps to even mat expansion during the PU foaming process. U809 is compatible with CO2 blowing agent used in insulating material manufacturing process. Excellent glass/polyurethane bonding brings improved mechanical performance and dimensional stability to the PU foam. U801 superior drapability fits the most complex mold shapes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U801/U809 mats are compatible with polyurethane resin systems and designed for PU foam reinforcement process. U809 is suited for LNG (Liquified Natural Gas) carrier cryogenic insulating systems. U801 is recommended for PU foam reinforcement in replacement of wood structure, in housing and recreational vehicle applications. NOMINAL MAT WEIGHT (G/CM2):225 - 300 - 450 - 600 - 900 NOMINAL MAT WEIGHT (OZ./SQ.FT):0.75 - 1.0 - 1.5 - 2.0 - 3.0 ROLL WIDTH (CM):127 - 128

SE8400 Type 30™ singleend roving is specifically designed for pultrusion processing in applications requiring high electrical resistance. Produced with Advantex®, corrosionresistant ECR glass technology by Owens Corning. Compatible with polyester, vinyl ester and epoxy resins. EFFICIENT PROCESSING Better wetout in polyester, vinyl ester, and epoxy resin, offering fast processing and good glasstoresin bonding, resulting in optimized part production. Good wetout and resin bonding results in excellent visual appearance of parts produced. GOOD MECHANICAL PROPERTIES Low seed glass results in excellent dielectric properties which are ideal for applications requiring high electrical resistance. ADVANCED SERVICE LIFE Advantex® corrosion resistant glass fiber combined with low seed glass is ideal for longterm electrical, physical, and acid resistance, reducing the potential for costly brittle fracture failures in the field. STRAND TENSILES: ASTM D 2343:Tensile Strength, psi (Mpa) AVG. E-701 POLYESTER RESIN:353,900 (2440) % GLASS :58.8 AVG. DER 331 EPOXY RESIN:338,800 (2336) % GLASS:54.5 TEX:4400 YIELD:113 MANUFACTURING REGION:North America

Manual stapler, extremely compact and light, suitable for stitching cardboard boxes. Body with a special aluminum alloy and depth/dot shape adjustment. Each model can use two measures of 15 and 19 mm points by simply turning the adjusting device. Staples width:35 mm Charger capacity:100 staples Usable staples:35/15-35/19 mm Weight:Kg. 1,200

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside. Example model:140 Twist Cable Working:pneumatic Air consumption:50 Lt. / min Air pressure:6 bar Machine cycles:30 pcs. / min. Autonomy:About 5000 sealings Type of seal:Twisted lace Reels lenght:600-800 mt.

158B Roving is specifically designed for use in filament winding applications using epoxy resin, where high strength is required. 158B is suitable to reinforce phenolic resins. Fast wetout properties and high burst strength maximize customers’ processing and minimize costs.EXCELLENT PROCESSING Smooth runout combined with low fuzz properties, result in smoother parts and less downtime for cleanup, enabling higher efficiencies and lower manufacturing costs. FAST WETOUT Allows the processor to optimize part production speed resulting in increased productivity and reduced costs. HIGH BURST STRENGTH Excellent glass/resin bonding, which provides high burst strength in pipe or vessels. CORROSION RESISTANT Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion.

APRILIA 125/150 Leonardo/ST CODICE ORIGINALE:AP8102582 SKU:G 636

9703 wet use chopped strand (WUCS), featuring Advantex® glass fibers, is designed for improved line speeds and product strength in the manufacturing of wetprocess glass veils. Provides strength and durability for construction, home furnishings and asphalt roofing shingles. EXCELLENT TENSILE STRENGTH Desirable veil and wet web strength for demanding construction and enduse products for home furnishings. EFFICIENT PROCESSING Designed to improve wet web strength in nonwovens processing, allowing improved line speed and reduced veil defects. IMPRESSIVE MECHANICAL PROPERTIES Advantex® glass helps fight corrosion, enhancing service life compared to standard Eglass. Boronfree Advantex® glass, contributes to decreased emissions, reduces the environmental impact of manufacturing fiberglass, and provides superior performance in corrosive environments compared to standard Eglass.

LifeMat® wet laid glass nonwoven solutions help manufacturers improve the performance and lifespan of batteries. Pasting Mat is for use in flooded leadacid batteries for stopstart engines. Retainer Mat is for heavy duty and deep cycle batteries. DESIGNED FOR LEADACID BATTERIES (PASTING MAT) Excellent corrosion resistance with very low electrical resistance (<17mΩ/mm2). Minimal effect on cold cranking due to the low electrical resistance. EXCEPTIONAL PERFORMANCE (PASTING MAT) Reenforces the positive active mass at the surface while preventing positive active mass shedding. Exceptional oxidation resistance provides additional protection throughout the lifetime of the battery. EASE OF USE (PASTING MAT) LifeMat® is pasted onto/into the positive active mass where upon drying/curing a very strong bond is formed eliminating the need for pasting paper. Easy to cut and compatible with continuous pasting processes. Easily applicable in continuous pasting process. THICKNESS (MM):< 0.2 mm TENSILE:> 50N/50 mm ELECTRICAL RESISTANCE:<17mΩ/mm2 ROLL WIDTH:43 mm+ ROLL DIAMETER:75 mm Core ID PRODUCT THICKNESS (MM):0.2 - 1.2 NOMINAL ROLL WIDTH (MM) :43 - 2100 CORE ID (IN):3 or 6 PACKAGING FORM:Typically loose or on pallets, with leaves available on request.

UNICONFORM® mat is well suited for very complex forms requiring high deformation in closed molding process, and enables excellent translucency in panel applications. CHALLENGING APPLICATIONS Good drapability and highstretching provide ease of conformability and deformability to complex contours, while easy splicing and overlapping enable large and complex part design. IMPROVED SURFACE AESTHETICS The open mat structure enables a consistent resin distribution throughout the surface, providing a smooth appearance behind the gelcoat. Excellent panel clarity and translucency is provided by the use of glass material — no synthetic core or stitching. IMPROVED PERFORMANCES Continuous fibers provide high tensile and flexural performance to the final part. Lack of chemical binder provides improved smoke and fire resistance properties. NOMINAL MAT WEIGHT (G/CM2):450 - 600 - 750 - 900 - 1200 -1800 - 2400 OZ./SQ.FT:1.5 - 2.0 - 2.5 - 3.0 - 4.0 - 6.0 - 8.0

SE4850 singleend Type 30™ roving represents a compelling solution for Polypropylene in Direct Long Fiber Thermoplastics (DLFT) applications where improved performance and manufacturing economics is required. Improved resistance to fuzz generation for easier processing and improved housekeeping. Reduced strand stiffness for easier splaying. Increased lubricity for lower strand tension. Improved splice tensile strength for enhanced packagetopackage transfer and improved line efficiencies. Outstanding compatibility with PP for better wetout and dispersion. Optimized adhesion to PP to meet or exceed all mechanical performance needs. Rovings are available in a singleend internalpull package. Each pallet weighs about 1 ton and can be packaged in bulk or CreelPak™ packaging format. Pallets are stretch wrapped for load stability and for protection during transport.

PNEUMATIC SEALER SM 35/40A - WITH DATE PUNCHER Pneumatic sealer SM 35/40 A for closing bags in any material using an aluminum plate with a height of 5/7 mm. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. The seal is obtained from a coil with high autonomy, cut to a length of 35/40 mm, wrapped around the neck of the bag and finally pressed to form a flat closure. Machine complete with date and a kit of numerical punches, practical, economical and safe. Example model:SM 35 A - 5 mm Machine power supply:Pneumatic Air consumption:50 liters/minute Operating pressure:6 bar Maximum closing speed:30 pz./min Aluminum seal dimensions:Width 5 mm Thickness 0,6 mm Lenght 35 mm

UNIFILO® 700 Series continuous filament mats represent a large choice of tailored preforming solutions for closed mold process. EASY PROCESSING S744, S750 products enable extra stretch and good resin flow for deeper draw applications. U746 product provides good stretch and excellent resin flow required in multilayer applications. ENHANCED MECHANICAL PROPERTIES T750, T754 products provide enhanced mechanical properties in the crossmat direction. U720 product provides stronger and more durable preforms. It is well suited for automated processes. CORROSION RESISTANCE Excellent corrosion resistance with Advantex® Glass compared to standard Eglass providing longer service life in applications facing corrosion. U700 products are available with varying filament layout and binder contents to match up with specific customer applications. NOMINAL MAT WEIGHT (G/CM2):300 - 450 - 600 NOMINAL MAT WEIGHT (OZ./SQ.FT.):1.0 - 1.5 - 2.0 ROLL WIDTH (CM):50 to 306 ROLL WIDTH (CM):19.7 to 120.5

Windstrand® 3000A combines high weaving efficiencies and increased tensile Modulus at 0° for lighter blades and reliable performance. Blades utilizing Windstrand® 3000A are capable of operating in extreme environments due to its optimized design. LIGHTER BLADES 36% blade weight reduction HIGH WEAVING EFFICIENCY High weaving efficiency for stronger blades HIGH PERFORMANCE 0° fiber Modulus greater than 88 GPa Enhanced 90 ̊ properties Operation at increased Fiber Volume Fraction (FVF) levels Rovings are available in a singleend internalpull package. Each pallet weighs approximately 1 ton. Pallets are stretchwrapped for load stability. All doffs are wrapped with TackPakTM for protection and to aid package runout and transfer. Full doffs are approximately 19 kg (40 lb.) and they can be packaged in bulk or CreelPak® format.

Manual stapler particularly robust, suitable for the top closure of cardboard boxes. Available in 3 models for staples with width mm. 35 and depth mm. 15-19-22 and is provided with a device for adjusting the depth of stitching. Charger capacity:100 staples Usable staples:35/15 - 35/19 – 35/22 (to be specified at time of order) Weight:Kg. 2,5

Automatic banding FP TZ 888 simple and inexpensive, using paper and polypropylene tapes 30 mm. width. Maximum useful sizes mm. 240x140 h. (lenght unlimited). Speed up to 25 cycles per minute. The tape's tension is adjustable by knob. Manual or automatic operation. The banding FP TZ 888 in addition to the classic use in graphic arts, binders, paper industries, is particularly suitable for the realization of multi-packs or for the matching of multiple products in sales promotions. Useful dimensions:- Width from 40 to 240 mm. - Height from 5 to 140 mm - Lenght from 50 mm. to unlimited Max speed:25 cycles/min. Tape width:mm 30 Electric Supply:220V - 50 Hz - 150W

SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required. LOW ODOR VERIFIED SE4818 Low Odor has been proven to meet low odor requirements per OEM test standards for automotive interior composite parts. Test methods include VDA270 German Association of the Automotive Industry, PV3900 Volkswagen SAE standards and testing and the Geely Low Odor test method Q/JLY J1770528D. EXCELLENT PROCESSING No catenary and low fuzz promotes superior processing, enabling higher efficiencies and lower manufacturing costs with less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Compared to other reinforcements on the market, SE4818 Low Odor offers superior composite tensile , flexural and Impact performance. Providing maximum part strength and long part service life. TEX:2400 FILAMENT DIAMETER (Μ):17 LOSS ON IGNITION (%):0.35 MOISTURE (% MAX):<0.05 MANUFACTURING REGION:Asia Pacific

ME1960 multiend roving represents a versatile solution for a largesurface of SMC (Sheet Molding Compound) components that require a combination of efficient processing, high mechanical, and aesthetic properties. EFFICIENT PROCESSING Easy unwinding and chopping, flat laydown, and uniform dispersion with low fuzz and static for large and/or semistructural part molding. ENHANCED PERFORMANCE Better wetout allows higher glass loading (up to 65% according to a 2016 single customer data source) due to excellent wetthrough and impregnation. This can be leveraged to further enhance the mechanical strength and stiffness of the composite part in complex structures. IDEAL COLOR (WHITE) FOR PIGMENTED PARTS Desirable product flow within mold at low shrinkage delivers a resinrich whitecolor surface aspect with lowporosity which facilitates good pigmentation or painting of finished parts. MANUFACTURING REGION:Europe PRODUCT/DOFF DESCRIPTION:ME1960 2400 Tex EXTERNAL Ø (IN):290 HEIGHT (IN) :260 NET WEIGHT (LB):20

PulStrand® PRO41 Roving is designed to maximize pultrusion processes by reducing the number of glass doffs needed. High tex reduces floor space, improves downtime and labor, and provides the opportunity to make larger parts without compromising mechanical properties/processing. 5075% less floor space required to run your product line. Product change overs require fewer doffs and less labor. Space savings and large tex enables you to make larger parts with the same setup. EFFICIENT PROCESSING Smooth runout combined with low fuzz properties, results in smoother parts and less downtime for cleanup, enabling higher efficiencies and lower manufacturing costs. IMPRESSIVE MECHANICAL PROPERTIES Desirable shear and flexural properties in major resin systems, provide maximum part strength and long part service life.