Produse pentru folosit (11)

Can be finished with natural and synthetic veneer, plastic, synthetic or decorative paper films, paper and resin films, paints. Chipboards comply with EN312, GOST 10632-2014, for moisture-resistant chipboard. We offer a wide range of plate products: Thickness 8-40 mm; Width 1830, 2070, 2100 mm; Length 1700-3100 mm; Formaldehyde content - class E0.5, E1 Thickness:8-40 mm Width:1830, 2070, 2100 mm Length:1700-3100 mm

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides; additionally it can be varnished on one or both sides. PVC fabric, series “light” This line of products is recommended for sewing and is used for sewing auto curtains, curtains, shelters, donut tubes. Advantages of PVC fabrics of this batch: - Combination of low weight, high strength, plasticity; - Water tightness; - Non-toxicity; - Resistance to aggressive substances, as well as - gasoline, oil; - Wide temperature range - from -30°С to +70°С - Low price Density 450 g/m2:Width 2.5-3.2 m

It is designed for the production of artificial leather base, tablecloth and hospital sheeting Surface density 90 g/m2:Width 152 cm

The roofing membrane is a varnished material reinforced with polyester fabric with a three-layer application of PVC composition. It is intended for installation and repair of a single-layer coating of an unexploited roof of buildings and structures for various purposes: industrial, public and residential, as well as for waterproofing ground storage facilities, coatings of tanks, landfills, and other technical purposes. Density 1350 g/m2,:Width from 2.5 m Color: white, grey, turquoise green:Roll length 25 m

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. This material can be produced in different colors. Density: 630 g/m2:Width: 2.5-3.2 m

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. Material can be produced in different colors. Density: 750 g/m2:Width: 2.5-3.2 m

Wide weave fabric designed for cross-stitching and semi-cross stitching. Surface density 189 g/m2:Width 147 cm

The material for mine ventilation is a fabric base impregnated with a PVC composition with special additives. The material is intended for sewing air supply sleeves for forced ventilation in mines, mine workings, tunnels. Fire-resistant composite material provides fire resistance and guarantees stable operation in the temperature range from -30ºС to +70ºС and does not depend on environmental conditions. Density 550 g/m2:Width from 2.5 m Color black:Roll length 40 m

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. This material can be produced in different colors. Density: 900 g/m2:Width: 2.5-3.2 m

The awning material is a three-layer PVC material. The basis of the material is a fabric made of polyester technical threads. The base is covered with PVC composition on both sides, additionally it can be varnished on one or both sides. Density: 650 g/m2:Width: 2.5-3.2 m

Woven polyester geotextile 50/50 Geotextile application - Construction of highways and railways; - Arrangement of temporary highways and pedestrian zones; - Reinforcement of soil embankments and slopes of roads; - Concrete cover; - Landscape design; - Drainage; - Isolation and ballasting of main pipelines Surface density 160 g/m2:Width 340 cm