Produse pentru echipamente laborator (5)

SE0S 02 is the best solution for the customers, who need quick analysis, high specifications, safety and fair accuracy of element composition identification results in metal production at minimal purchase, commission and operating of the device costs. Applications: - Industrial analytical laboratories of metallurgical and machine-building factories; - Express analysis of alloys while melting at workshops; - Identification of alloy grade at warehouses; - Research institutes and universities. SEOS 02 identifies the composition of iron alloys (all types of steel and cast iron) and nonferrous alloys on any basis (Al, Cu, Zn, Ni, Ti, Mg, Co, Pb, etc.). CCD allows to analyze the whole range of basic elements used in metallurgy, including S, P, C. SEOS 02 measurement accuracy is in accordance with international regulatory documents. Every SEOS 02 spectrometer passes the state verification procedure as a measuring instrument. Ambient temperature:10-35 °C Atmospheric pressure:84-106,7 kPa (630-800 mm Hg) Relative humidity (at T=25 °C ):≤ 80% Electrical power:220 V, (50±2) Hz Length, mm:≤ 690 Width, mm:≤ 510 Height, mm:≤ 400 Weight, kg:≤ 50

Multipurpose industrial IR Fourier spectrometers IROS P series are designed for routine analytical measurements in the mid-IR and near-IR region of the spectrum, in particular, qualitative and quantitative analysis of samples of organic and inorganic substances in gaseous, liquid and solid state, including films and powders. IROS P series FTIR spectrometers are based on the Michelson self-compensating interferometer which does not require dynamic adjustment and has the ability to install in the cell compartment a variety of gas and liquid cells, optical attached modules and accessories for liquid, solid and gaseous samples. Main characteristics: - Spectrometers product range with resolution up to 0.12 cm-1 - High sensitivity, rapid response - Automated measurements, easy to use - Wide range of accessories - Application software for dedicated tasks KBr/Ge/CaF2/Ge, optical windows and beamsplitter with moisture-proof coating Spectral range, cm-1:12 500 – 3 700 (IROS P11), 7 800 – 370 (other models) Spectral resolution, cm-1:0.12 to 2.0 due to model Signal-to-noise ratio:> 60 000 RMS Complete spectrum obtaining min. time, s:< 1 Beam splitter:: IROS P01, IROS P02:KBr with multiKBr with Ge-based coating-layer Ge-based coating IROS P03:KBr with multi-layer Ge-based coating IROS P11:CaF2 with multi-layer Ge-based coating IROS P01, IROS P02:High-temperature ceramic metal IROS P03:High-temperature ceramic metal or external IROS P11:Halogen lamp Detectors:: IROS P01, IROS P02:Pyroelectric DLaTGS detector IROS P03:DLaTGS, cooled PbSe photo resistance IROS P11:InGaAs, Si photodiodes Cell compartment dimensions, mm:150х190х170 (IROS P11), 200x190x170 (other models) Spectrometer dimensions, mm:520х490х250 (ROS P03), 520х370х250 (other models) Weight, kg:28 to 36 due to model

Application areas: - health care - drug discovery - pharmacy - environmental monitoring - forensic science - homeland security Technical performance: - patented design is a combination of a multifunctional sample introduction and ionization system, drift tube ion mobility spectrometer and sector TOF mass spectrometer with orthogonal acceleration - Multifunction sample introduction and ionization system works with both integrated ion sources and external available engineering solutions. Integrated ionization platform allows to use electrospray (ESI), atmosphere pressure chemical ionization (APCI), atmosphere pressure photoionization (APPI) - high resolution ion mobility spectrometer provides maximum selectivity compared to existing commercial instruments Main advantages: - allows to reach better sensitivity than approaches based on orthogonal acceleration reflectron TOF analyzers - allows to analyze gases and liquids much faster than liquid chromatography/mass spectrometry Mobility resolving power:70 – 120 (measured as td/dt1/2) Drift tube temperature:20 – 250°C Mass range:20 – 1000 Da Mass resolving power:2000 (FWHM) Detection limits:relative 4*10-9 M, absolute 7*10-15 Mol (for 2,6-DtBP during 100 sec) Mass accuracy:5 ppm Data collection:real-time integrating transient recorder based on 655 MHz 8 bit analog-to-digital converter Weight:100 kg Dimensions:60 cm (wide) x 80 cm (deep) x 130 cm (tall) Software:control of instrumental parameters, data collection and processing

MaOS HiSpec. High resolving power drift tube ion mobility spectrometer Application areas: - Health care - Drug discovery - Pharmacy - Environmental monitoring - Explosives detection - Forensic science - Biotechnology Main advantages: - Improved selectivity thanks to twice increased resolving power - Possibility to apply different ionization methods - Integrated technical solution for combination with different separation techniques

IROS 05 FTIR spectrometer is designed to provide a wide range of sample measurement techniques in the most challenging environments, from the scientific laboratory to the industrial production line. Compact size, reasonable price, a unique set of accessories and high performance – these advantages of IROS 05 spectrometer allow it to fit most of research and field tasks as a midlevel spectrometer for academic and industrial applications. Features: - A wide array of functions due to various attached modules and detectors - Capability of additional external devices connection for IR spectrum registration - Stability to temperature fluctuation and vibration due to unique patented interferometer design - Humidity resistance because of ZnSe optics - Spectrum recording control buttons on device case for fast routine operations - Compact and light-weight IROS 05 can be combined with wide-range IR microscope IR M series and FiPOS ATR fiber probes. Spectral range with MG-32M detector:5 700 – 470 cm-1 Spectral range with DLaTGS detector:8 500 – 470 cm-1 Spectral range with MCT detector:6 000 – 600 cm-1 Beam splitter:ZnSe Interferometer:Double Cat’s Eye Spectral resolution:0.5 cm-1 Signal-to-noise ratio with the pyroelectric detector:≥ 40 000 RMS (range 2 200 – 2 000 cm-1, per 1 min, resolution 4 cm-1) Weight:15 kg