Produse pentru echipamente laborator (527)

The SteriPlast® scraper for foodstuffs, made of blue polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Sturdy and convenient scraper for disposable use. The scraper is suitable for scraping off, smoothing or cleaning as well as removing residue. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The use of blue tools thus helps to meet the requirements of the HACCP hazard analysis and assessment in reference to foreign objects. This is an important criterion, especially in food processing and production and in the animal feed and pharmaceutical industry. Material:PS

Copa de toma de muestras de acero inoxidable V2A (1.4301) con mango largo totalmente cerrado. La copa de toma de muestras tiene una profundidad de inmersión de hasta aprox. 500 mm y está totalmente libre de surcos y cavidades. Gracias al diseño cerrado de la barra, esta copa tipo pala es ideal para tomar muestras de agua de pozos, lodos, aguas residuales o purines. Esta copa se puede esterilizar mediante vapor y fuego, lo que permite esterilizarla fácilmente en el propio lugar de uso.

Matériel de laboratoire, avec deux supports pour les entonnoirs de sédimentation - Le support d’entonnoir de sédimentation est destiné au rangement sûr et pratique, au support et au stockage d’entonnoirs Imhoff pendant la sédimentation. Grâce à deux logements d’entonnoir, les entonnoirs Imhoff ont un maintien sûr, stable et ils peuvent être positionnés absolument à la verticale. Support avec respectivement deux supports pour entonnoir de sédimentation, adéquat pour entonnoirs à partir d'un diamètre de 90 mm. Grâce à un concept magnétique innovateur, aucune vis de blocage n'est nécessaire, les supports d’entonnoir peuvent être réglés en hauteur de manière simple, flexible et à une main. Avec les accessoires correspondants, les fixations d’entonnoir Imhoff peuvent également être remplacées par des supports d’entonnoir à usage multiple. Matériel:PP, acier chromé Hauteur réglable:jusqu'à 450 mm

Luminance standards and radiance standards are used in photometry and radiometry, in particular for the calibration and characterization of cameras and optical measuring devices. Another application is the determination of reflection, transmission and absorption properties of materials. Luminance and radiance standards are homogeneous light sources that have a uniform brightness over their entire emitting surface and emit almost perfectly lambent and uniformly in all directions. The mode of operation is based on the principle of the integrating sphere. The integrating sphere consists of a hollow, spherical structure with a highly reflective inner surface. This surface is coated with a diffuse reflective coating of barium sulphate, which scatters almost 100% of the incident light. This property enables the sphere to distribute the light evenly in all directions and eliminate directional effects. Diameter:75 mm - 2500 mm Coating:Barium sulfat (BaSO4) Wavelengths:BaSO4 300-2400 nm Ports:1 (Standard) Accessories:UControl control unit

Client-specific UVC sensor Optical properties in accordance with DVGW document, W294 part 3 Individual design according to customer’s requirements Developed for application in drinking water

The German Technical and Scientific Association for Gas and Water (DVGW) and the Austrian standardization committee have defined the requirements for UV water disinfection systems with UV low-pressure lamps in DIN 19294-1:2020-08. This also specifies the design, function and opening angle of DVGW reference radiometers. The previous technical rule W294-3 and ÖNORM 5873 continue to apply to devices for drinking water disinfection with medium-pressure lamps. The sensors are inserted into a pressurized water-tight measuring window tube, which enables simple and reproducible replacement of the sensors. With an aperture angle of 160°, our sensors are suitable for precise radiometric measurement of UVC irradiance in UV water disinfection systems. We offer these with reference radiometer RMD. The RMD as DVGW reference radiometeris one of the latest developments from Opsytec Dr. Gröbel GmbH. Spectral range:240 - 290 nm Measurement range, typ.:0 - 200 W/cm² Resolution:0,001 µW/cm² Dimensions:Ø 20 x 60 mm Weight:160 g

The water-proof sensor UVX-SE serves as robust, long-term stable measuring heads for the precise measurement of UV irradiances in production lines, that have to be wet cleaned. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority) and can be exposed to pressure of up to 10 bar. The sensors are available in eight spectral ranges and two measuring ranges. This allows the sensors to be optimally adapted for the application. The integrated electronics produce a signal that is transmitted to the PLC or panel meter, so that inferences are minimized. Operating voltage and output signal can be selected to match the measurement task or PLC interfaces. For small control tasks, the sensor UVX-SE can be connected to RM-32, which shows current irradiance on a 3.5-digit digital display and switches two relay contacts with adjustable warning and alarm signals. Measuring range:0 - 200 mW/cm² Measuring range option:0 - 20 mW/cm² Connector:G 3/4“ Dimensions:see drawing Weight:~420 g

For adhesive bonding and curing through UV radiation, LED spotlights and gas discharge lamps with liquid light guides, whose high irradiance enables curing and polymerization within seconds, are used. Exact measurements in order to monitor the irradiance and dose are required for the process control. Here, the UV sensor is exposed to the high irradiances and temperatures, which could lead to an impairment of the measurement results. The sensor series XT („eXtrem Temperature“) has been developed for this critical application. The XT sensors are suitable for up to 50.000 mW/cm² and operating temperatures of 150°C. At the same time, the XT sensors are compact and thus flexibly usable where needed. This is possible due to the separation of sensor-head and sensor-electronics. The XT sensor with its excellent cosine correction guides the light through a light guide into the calibrated sensor-electronic, which is integrated in the handpiece. Operation temperature:0 to 150 °C Storage temperature:-10 to 150 °C Humidity:< 80% non-condensing Light guide:0,3 m / 1,5 m Cable length:2 m

The handheld UV lamps are high-powered UV radiation sources for UV-A and UV-C radiation. They enable the sensitive detection of luminescent substances through their high irradiance. The handheld UV lamps are available in three versions. UV-A and UV-C lamps are equipped with two UV lamps to obtain a very high intensity of irradiation on the sample. The UV-A/C handheld lamp allows the simultaneous or separate application of UV-A and UV-C radiation with the same device. All handheld UV lamps are mains operated and have VIS filters, which effectively filter the visible light from the tubes. Thus, even weak luminescence in the sample can be optimally detected. We recommend our additional stand to create a table lamp and have both hands free for testing. HIGHLIGHTS OF UV HAND-HELD LAMPS High irradiance of ~ 500 µW/cm² in a distance of 10 cm Filters for visible light from the tubes Weak luminescence can be detected Long lifetime Optional: Switchable UVA and UVC emission Wavelength:254 nm or 365 nm Max. irradiance:500 µW/cm² in Dimensions:280 x 86 x 65 mm Weight:~1400 g Mains:230 VAC / 50 Hz

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged. Material:Galvanised steel and aluminium

Cierre roscado con anillo de autenticidad para bidón compacto. Tapa roscada de PP, junta de PE, rosca DIN50. El cierre protege contra la manipulación y ofrece una garantía de cierre, ya que el anillo de seguridad se rompe visiblemente cuando se abre por primera vez.

The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium! Material:PP, PE and PTFE Thread, inflowing side:3/4'' inner thread cap nut

Cylindrical T hose connector to connect hoses. Material:PP, transparent

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

Esta raspadora de alta calidad puede usarse para raspar, alisar, limpiar, enmasillar y eliminar sustancias pegajosas muy adherentes o incrustadas. El borde de esta raspadora de acero inoxidable resistente a la corrosión es ideal para mezclar o separar sustancias viscosas. La superficie lisa, robusta y sin costuras garantiza una limpieza óptima y cumple con los requisitos de higiene. Esta raspadora es una herramienta ideal para laboratorios, plantas de producción y salas blancas. Es perfecta para el uso en los sectores químico, farmacéutico, cosmético, de piensos y de alimentación y bebidas.

The high-quality scraper is suitable for scraping off, smoothing, cleaning, levelling out and also for removing strong adhesive, sticky substances or dried up media. The edge of the corrosion-resistant stainless steel scraper is ideal for blending and portioning viscous media. The smooth, seamless and sturdy surface ensures cleaning without difficulty and meets hygenic requirements. The scraper makes a suitable implement for use in laboratories, production and clean rooms. It is ideal for use under rugged conditions in pharmaceuticals, chemistry, cosmetics, animal feed and food & beverage.

The SteriBag Premium sample bags uniquely combine a high degree of security, sterility, tamper evident closure and traceability, they are used to securely transport and for the storage of samples. After sampling, the sample can be filled directly into the sterile sample bag. The tamper-evident closure seals the bag liquid-tight and secure. When trying to open the closure again, the word "STOP" appears clearly visible. Both the sample bag and the tear-off field are labeled with a unique tracking number, this allows a complete documentation and traceability. SteriBag Premium is suitable for many demanding applications in the food, pharmaceutical, medical area as well as in cleanroom or biotechnology sectors. Capacity:300 ml L x W:200x145 mm Pieces per pack:100

The SteriPlast® spoon for foodstuffs, made of polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. The spoon for foodstuffs is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders, granulates, pastes and fluids. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The use of blue tools thus helps to meet the requirements of the HACCP hazard analysis and assessment in reference to foreign objects. This is an important criterion, especially in food processing and production and in the animal feed and pharmaceutical industry. Material:PS

Boquillas cilíndricas en T para la conexión de mangueras. Material:PP

Client-specific UVC sensor Mechanics adapted to customer needs Sensor with integrated amplifier Supply voltage ±5 V

Client-specific UVC sensor Sensor with integrated amplifier Supply voltage ±5 V Developed for application in drinking water

The SteriPlast® spatula for foodstuffs, made of polystyrene, is produced and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. The spatula for foodstuffs is ideal for sampling powders, granulates and pastes. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The use of blue tools thus helps to meet the requirements of the HACCP hazard analysis and assessment in reference to foreign objects. This is an important criterion, especially in food processing and production and in the animal feed and pharmaceutical industry. Material:PS

Válvulas de retención con flecha de dirección grabada o impresa en color negro. Con boquillas cónicas. Múltiples aplicaciones. Temperatura de servicio: +0 a +40 °C

El acero y el aluminio hacen que el stop-it metal sea tremendamente resistente al calor y estable. La pinza para manguera se encuentra disponible en cuatro tamaños diferentes, para diámetro de manguera de hasta 30 mm. La pinza para manguera se puede utilizar allí donde se deba regular o bloquear el flujo en mangueras para líquidos o gases. Regulación del flujo sin escalonamiento: La tuerca moleteada de la pinza para manguera stop-it permite una regulación precisa y sin escalonamiento o una detención completa del flujo incluso en conexiones de manguera ya existentes. La manguera se empuja contra el gancho de acero estable, lo que evita que se produzcan daños en la misma. Material:Acero galvanizado y aluminio

Easy-Click-Verschluss – stop-it kann in jeder Position geöffnet und geschlossen werden – ohne lästiges Auf- und Abschrauben. Hochwertiges Material – stop-it ist aus dem hoch hitze- und chemikalienbeständigen Kunststoff PVDF gefertigt. Der Bügel ist aus Stahl, verzinkt. Die Schlauchklemme kann überall eingesetzt werden, wo der Durchfluss in Schläuchen mit Flüssigkeiten oder Gasen geregelt oder abgesperrt werden muss. Stufenlose Durchfluss-Regulierung: Mit der Rändelmutter der Schlauchklemme stop-it ist eine stufenlose, feinfühlige Durchfluss-Regulierung oder gänzliches Stoppen des Durchflusses auch an bereits bestehenden Schlauchverbindungen möglich. Der Schlauch wird breitflächig gegen den stabilen Stahlhaken gequetscht, eine Beschädigung des Schlauches wird so vermieden.

Cierre Easy-Click: stop-it se puede abrir y cerrar en cualquier posición, sin la incomodidad de atornillar y desatornillar. Material de alta calidad: stop-it está fabricado en PVDF, un material plástico altamente resistente al calor y a los productos químicos. El estribo está fabricado en acero galvanizado. La pinza para manguera se puede utilizar allí donde se deba regular o bloquear el flujo en mangueras para líquidos o gases. Regulación del flujo sin escalonamiento: La tuerca moleteada de la pinza para manguera stop-it permite una regulación precisa y sin escalonamiento o una detención completa del flujo incluso en conexiones de manguera ya existentes. La manguera se empuja contra el gancho de acero estable, lo que evita que se produzcan daños en la misma.

L'acier et l'aluminium rendent la pince stop-it métallique extrêmement robuste et résistante à la chaleur. Cette pince est disponible en quatre couleurs différentes, pour des diamètres de tuyaux jusqu'à 30 mm maxi. Cette pince peut être utilisée partout où le débit des liquides ou des gaz dans les tuyaux doit être régulé ou bloqué. Régulation progressive du débit : Grâce à l'écrou moleté de la pince stop-it, il est possible d'obtenir une régulation fine du débit ou un arrêt complet du débit même sur des tuyauteries existantes. Le tuyau est écrasé sur une grande surface contre le crochet métallique, ce qui permet d'éviter un endommagement du tuyau. Matériel:Acier zingué et aluminium

StopCock angled Thread, inflowing side:3/4'' inner thread cap nut Thread, outflowing side:spout/nozzle

Fermeture Easy-Click – La pince stop-it peut être ouverte et fermée dans n'importe quelle position – sans vissage ni dévissage. Matériau de haute qualité – La pince stop-it est constituée de PVDF, qui est résistant à la chaleur et aux produits chimiques. L'étrier est en acier zingué. Cette pince peut être utilisée partout où le débit des liquides ou des gaz dans les tuyaux doit être régulé ou bloqué. Régulation progressive du débit : Grâce à l'écrou moleté de la pince stop-it, il est possible d'obtenir une régulation fine du débit ou un arrêt complet du débit même sur des tuyauteries existantes. Le tuyau est écrasé sur une grande surface contre le crochet métallique, ce qui permet d'éviter un endommagement du tuyau.

Le racleur de haute qualité est approprié pour gratter, lisser, nettoyer, enduire ainsi que pour éliminer des substances collante adhérant fortement ou des fluides séchés. Le bord du racleur en acier inoxydable résistant à la corrosion est idéal pour couper ou diviser en portions des produits visqueux. La surface lisse, sans raccord et robuste garantit un nettoyage sans problème et satisfait les exigences hygiéniques. Ce racleur est approprié comme moyen auxiliaire dans le laboratoire, la production et dans la salle blanche. Il convient à l’utilisation solide dans les industries chimique, pharmaceutique, cosmétique, agroalimentaire et des boissons.