Produse pentru echipamente laborator (352)

The use of ultraviolet-curing adhesives and compounds is constantly increasing. With the LedControl S UV LED controller, you remain flexible for future requirements. Due to the modular design, one UV LED lamp, up to five or even up to 16 UV LED lamps with different wavelengths can be operated and individually adjusted with one LEDControl S. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths, you remain particularly flexible and can upgrade and change over at any time. With several UV LED lamps, the irradiation can also be ideally homogenized to achieve the best possible uniformity. With the intelligent UV LED control, the power of the ultraviolet LED lamps can be individually adjusted between 2% and 100%. A timer for irradiation times between 0.01 s and 9999 s is already integrated. Dimensions:185 x 251 x 100 mm (S) Operating temperature:5 to 40 °C Storage temperature:-10 to 60 °C Humidity:< 80%, non-condensing Mains:100 - 240 V, 50/60 Hz

Client-specific UVC-Sensor Modification of our UVC-SE Sensors optical entrance nearer to the lamp Transmission measurement / calculation possible using UVC-SE and the UVCSE long sensor

L’assurance qualité commence par le contrôle à la réception des marchandises ! L’échantillonnage toutes couches de produits en vrac n’est plus un problème avec le préleveur de poudres et de granulés PowderProof®. PowderProof® est la solution professionnelle éprouvée pour le prélèvement mobile de poudres et granulés. L'unité d'entraînement robuste permet de raccorder et de remplacer sans problème différentes cannes d'échantillonnage et spirales de transport. Ce concept modulable permet l'emploi de PowderProof® pour les granulés et poudres, dans des tonneaux, fûts, BigBags ou sacs. Des accessoires utiles tels des paniers à bouteilles, des sachets pour échantillons et des étiquettes d'obturation close-it permettent un prélèvement encore plus simple et sûr. PowderProof® avec pic pour installation horizontale, pour le prélèvement d'échantillons de sacs, avec pic pour installation verticale, pour le prélèvement de récipients ouverts tels que des fûts, tonneaux ou BigBags. Modèle:pour poudre jusqu'à 2 mm ou pour granulés de 2 à 4 mm Canne: horizontal ou vertical Profondeur de plongée:300 mm, 600 mm, 900 mm ou 1200 mm

With our UV probes, we offer calibrated probes for measuring of the irradiance in areas that are difficult to access. The UV probes are available in three versions and several standard lengths of 15 cm to 60 cm. With an outer diameter of only 6 mm, the UV probes are a perfect supplement for the precise radiometers RMD, as well as for the spectral radiometers UVpad E and SR900. All UV probes come with a diffuser, which enables the absolute measurement of irradiance and which ensures the required cosine correction during a non-perpendicular irradiation. The UV probes are, together with the radiometers, traceably calibrated to the PTB, recalibratable and are supplied with a calibration certificate by the factory. By using appropriate materials, an outstanding long-term stability is reached. A repair service and parts supply is of course available for many years. Diameter, probe:Ø 6 mm Length, probe:15 cm or 30 cm Weight:~ 200-350 g Operation temp., probe:0 to 200 °C

Retaining valve with embossed directional arrow or printed in black. With conical nozzles. Various uses. Operating Temperature:0 to +40 °C

The water pressure-proof UVC-SE sensors serve as robust, long-term stable measuring heads for the precise measurement of UV-C irradiances of low-pressure mercury lamps and amalgam lamps in water disinfection and wastewater systems. The sensor can be exposed to pressure of up to 10 bar. A long-term, stable high-sensitivity photo diode with a large active area of 1 cm² is used. This provides low noise and improved sensitivity, below 260 nm, compared to SIC sensors. Superior corrosion resistance and long-term stability is also achieved through the use of appropriate materials. No aging is determined over a period of one year. The sensors are calibrated with traceability to the PTB, the German national test authority. The integrated electronics produce a signal voltage that is transmitted to the PLC or panel meter RM-32, so that inferences are minimized. Operating voltage and output signal can be selected to match the measurement task or PLC interfaces. Measuring range:0 - 1000 W/m² Spectral range:180 - 280 nm Dimensions:see drawing Housing material:Stainless steel Weight:~420 g

Detectable SteriPlast® scoops, made of blue polystyrene, are produced (except for the 1000 ml scoop) and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Detectable scoops are ideal for powders, granulates and pastes. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic. Material:PS

Mini ducha lavaojos ideal para laboratorios, unidades de trasiego u otros lugares en los que se trabaja con sustancias agresivas. Eyes Fresh se puede montar en cualquier grifo de agua fría convencional. Con solo pulsar un botón se puede cambiar de ducha lavaojos al goteo de agua para el lavado (al cerrar el grifo se vuelve a la función de ducha lavaojos). Compatible con grifos de agua con rosca exterior de M22x1, 1/2" o 3/8". Si la presión de agua es suficiente, rendimiento según la norma DIN EN 15154-2.

Cuchara para la toma de muestras de sustancias en polvo, productos intermedios y materias primas en la industria farmacéutica. Para ello se deben emplear materiales de alta calidad con una superficie especial, con el fin de evitar la contaminación cruzada. Nuestra Pharma-spoon cumple estas exigencias. Fabricado en acero inoxidable V4A (1.4404), superficie pulida a mano (no electropulida). El excelente pulido del Pharma-spoon proporciona ventajas decisivas. Longitud total:650 mm

When decanting flammable liquids without the machines and containers involved in the process being sufficiently earthed, electrostatic build-up can occur, which for many substances can result in fire or an explosion. Bürkle’s Anti-static set ensures easy and reliable earthing. The Anti-static set consists of three colour-coded connecting copper cables with clamps in a handy plastic case.

Mini-Augendusche ideal für Labor, Abfüllstationen oder alle Arbeitsplätze, an denen mit aggressiven Stoffen gearbeitet wird. Eyes Fresh lässt sich auf jeden herkömmlichen Kaltwasserhahn montieren. Durch Knopfdruck kann von Augendusche auf Perlwasser zum Waschen umgestellt werden (wird beim Schließen des Wasserhahns wieder auf Augenduschfunktion zurückgestellt). Passend für Wasserhähne mit Außengewinde M22x1, 1/2" oder 3/8". Bei ausreichendem Wasserdruck Leistung gemäß DIN EN 15154-2.

Barrel pump made of stainless steel with discharge tube. The Bürkle barrel pump made of stainless steel AISI 304 (1.4301) is suitable for filling combustible and easily flammable liquids. The barrel pump can conduct electricity and therefore fulfills the requirements for handling flammable liquids in combination with the accessory antistatic set. The PTFE gaskets ensure long-term and maintenance-free use. Pumping capacity approx. 9–22 l/min, dependent on pump length. The wide range of accessories makes it possible to adapt the pump to very different requirements. Material:Stainless steel Immersion tube Ø:32 mm

Detectable SteriPlast® spoons, made of polystyrene, are produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. The detectable spoons are available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and are ideal for sampling powders, granulates and fluids. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic. Material:PS

Client-specific UVC sensor Modification of UVC-S sensor Sensor and amplifier separately arranged Submersible sensor Developed for application in sewage, waste / residual water

Las pinzas de plástico ligeras de un solo uso reducen el cansancio a la hora de trabajar. Este útil de laboratorio fabricado en sala limpia cumple con las normas más exigentes y previene la contaminación cruzada y el ensuciamiento de la muestra investigada. Las pinzas de laboratorio resultan idóneas para los sectores químico, farmacéutico, cosmético y alimentario, así como también para la ciencia. Forma puntiaguda/ángulo Las pinzas desechables poseen puntas de manipulación finas, lisas y en ángulo. Los extremos puntiagudos en ángulo permiten recoger diferentes materiales con precisión y procesarlos con seguridad. Forma puntiaguda Las pinzas anatómicas tienen una punta recta y rugosa por el interior. Gracias a esto, se pueden agarrar con total fiabilidad incluso materiales sensibles. Forma con punta ancha Las pinzas desechables tienen un apunta ancha. La punta ancha es lisa y roma para evitar que puedan producirse daños en el material al agarrarlo. Material:PS Color:Blanca, azul o azul detectable Longitud total: :130 mm

In order to design machines safely and to meet the requirements of the Machinery Directive 2006/42/EC, safety functions are required in the control systems. Typically, the required Performance Level PLr is determined for each safety function. This is where the first difficulty begins during the planning and commissioning of UV systems, namely determining the severity of the injury, the frequency and duration of exposure, and how to avoid the uv hazard. In the short term, UV exposure of the skin leads to erythema, elastosis and/or skin cancer. In contrast, UV exposure of the eye can lead to photokeratitis, conjunctivitis and cataractogenesis. If e.g. skin cancer is considered, it is a severe, usually irreversible injury. In this context, Directive 2006/25/EC „Artificial Optical Radiation“ allows regular exposure up to a daily exposure limit of 30 J/m². Mounting type:DIN rail Dimensions, approx.:10,5 x 7,0 x 21,5 cm Cooling:passive Operating temperature:5 to 40 °C Storage temperature:-10 to 60 °C

The PLC UV sensors and VIS sensors serve as precision sensors for the measurement of UV irradiances and illuminances in systems with programmable logic controllers (PLCs). Spectral range, measuring range, operating voltage, and output signal can be selected to match the measurement task and the PLC. The integrated electronics generate a signal voltage that is transmitted with the low interference cable to the PLC. The built-in diffusers provide the required cosine correction. The sensors are calibrated with traceability to the PTB (Physikalisch Technische Bundesanstalt, the German national test authority); after being calibrated, they are shipped with a factory calibration certificate. Excellent long-term stability is achieved through the use of appropriate materials. Of course, a repair and spare parts service is available for many years. Our product range includes eight spectral ranges and three measuring ranges for the sensors. Measuring range:0 - 100 mW/cm² Dimensions:80 x 40 x 20 mm Weight:150 g Connector:5-pole M12 Humidity:< 80% Non-condensing

The detectable SteriPlast® scraper, made of polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. Sturdy and convenient scraper for disposable use. The detectable scraper is suitable for scraping off, smoothing or cleaning as well as removing residue. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic. Material:PS

Detectable SteriPlast® spatulas, made of blue polystyrene, are produced and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. Detectable spatula are ideal for sampling powders, granulates and pastes. These scoops, spatulas, spoons and scrapers are not only coloured blue but also have a special additive in the material that makes them visible to metal detectors or X rays. These products can therefore be rejected with standard systems for checking for foreign objects, even though they are made of plastic. Material:PS

The withdrawal system can be used to dispense high-purity liquids quickly and without complications. An excess pressure is produced in the container with pressurised gas (compressed air or nitrogen), thereby pumping the liquid out of the tank. The advantage of operation using pressure gas is that the user can extract even large amounts without effort while having both hands free to dispense the solvent. In this way, large amounts of hazardous media such as acetone, ethanol and methanol, etc. can also be safely dispensed and accurately metered using the stop cock. For use with media sensitive to oxygen or for ultra-pure media, operation with an inert gas (e.g. nitrogen) is possible. The barrel screw connection and shut-off valves seal off the barrel and pump hermetically. This means that no vapours containing solvents can escape after dispensing, thereby protecting users' health and the environment. Purpose:for barrels up to approx. 220 l Pump capacity approx.:10 l/min

Avec le tirage d’échantillon double multiple Novartos Uno, il est possible de prélever un échantillon multipoint double de plusieurs zones d’échantillonnage prédéfinies. Pour le tirage d’échantillon double, suivant la longueur, quatre, sept ou neuf chambres collectrices sont équipées de deux garnitures d’échantillon respectivement.

Die detektierbaren Spatel SteriPlast® aus blauem Polystyrol werden in unserem Reinraum Klasse 7 (10.000) produziert, für den Einweg-Bedarf einzeln verpackt und anschließend gammastrahlen-sterilisiert. Durch den langen, ergonomisch geformten, stabilen Handgriff und eine spitze Klinge, ist es möglich selbst mit diesem Einwegprodukt direkt in Gebinde wie Papier- oder Kunststoffsäcke einzustechen. Die detektierbaren Spatel sind ideal für die Probenahme von Pulver, Granulaten und Pasten. Ergänzend zum blauen Farbton haben diese Probenehmer einen speziellen Zusatzstoff im Material, der sie in Metalldetektoren oder per Röntgenstrahlen sichtbar macht. Diese Produkte können somit, obwohl sie aus Kunststoff hergestellt sind, über die üblichen Systeme zur Fremdkörperkontrolle aussortiert werden. Material:PS detektierbar, blau

Taking samples from sacks, boxes, bags, etc. with sampling lances is a common and time-proven practice. This produces holes through which easily flowing bulk goods could escape from the container. With the close-it seal, this can be prevented in an uncomplicated manner. close-it has been especially developed for this purpose. The label has a sandwich-type structure (aluminium/ paper) and seals the container hermetically (vapour barrier). This virtually prevents hygroscopic powders from clumping together. The label is not just used to provide a hermetic seal. It is also used for providing quality control information (sampling date, release yes/no, name of tester, etc.). The labels are available in different colours. With printing in red, blue, green, yellow, black, neutral, without printing in white. close-it can be written on with ball-point pen, pencil or felt-tip marker. W x H:95 x 95 mm or 150 x 150 mm

Die leichten Kunststoff-Pinzetten zum Einmalgebrauch ermöglichen ein ermüdungsfreies Arbeiten. Die im Reinraum gefertigten Laborhelfer entsprechen höchsten Standards und verhindern Kreuzkontamination oder Verunreinigungen der zu untersuchenden Probe. Die Laborpinzetten eignen sich für den chemischen, pharmazeutischen oder kosmetischen Bereich sowie die Lebensmittelindustrie und die Wissenschaft. Form spitz/abgewinkelt Die Einwegpinzette hat feine, glatte gebogene Greifspitzen. Mit den abgewinkelten, spitzen Enden lassen sich unterschiedliche Materialien präzise aufnehmen und sicher verarbeiten. Form spitz Die anatomische Pinzette hat eine gerade, innen geriffelte Spitze. Damit lassen sich auch empfindliche Materialien zuverlässig greifen. Form breite Spitze Die Einmalpinzette hat Enden mit einer breiten Spitze. Die breite Spitze ist glatt und stumpf, sie verhindert, dass beim Greifen Schäden am Material entstehen können. Material:PS Farbe:Weiß, blau oder blau detektierbar Gesamtlänge :130 mm

Commercially available spigots made of the materials polyethylene or polypropylene cannot be used for solvents. The spigot StopCock PA is made of electrically conductive polyamide and therefore perfectly suitable for solvents. StopCock PA fits onto 3/4" outer threads and with the supplied adapter onto 3/4" inner threads and therefore onto nearly all commercially available canisters and barrels where the discharge thread is at the bottom. The StopCock discharge cocks fits all containers with G 3/4" connection threads. Thread adapters facilitate connection of cocks to nearly all containers. Media-contacting parts:PA and PTFE Thread, inflowing side:3/4'' inner thread cap nut Thread, outflowing side:spout/nozzle

En el trasiego de líquidos inflamables, si se presenta alguna deficiencia en la conexión a tierra entre los aparatos y los recipientes, pueden producirse descargas electrostáticas que pueden provocar la combustión o la explosión de muchas sustancias. Con el kit antiestático de Bürkle se asegura una conexión a tierra sencilla y fiable. El kit antiestático se compone de tres cables coloridos de cobre con pinzas, presentados en un práctico maletín de transporte fabricado en material sintético.

Cuillère pharma pour le prélèvement d’agents pulvérulents, de mélanges intermédiaires et de matières premières en pharmacie. Il convient pour cela d’utiliser des matériaux spéciaux ayant une excellente qualité de surface, afin d’éviter les contaminations croisées. PharmaSpoon remplit totalement cette condition. En acier inox V4A (1.4404), avec une surface haute brillance polie à la main (et non électropolie !). Les excellentes propriétés de la surface de PharmaSpoon offrent des avantages décisifs. Longueur totale:650 mm

Rückschlagventile mit geprägtem oder schwarz aufgedrucktem Richtungspfeil. Mit konischen Tüllen. Vielfältig verwendbar. Druckbelastbar max. 4 bar, Betriebstemperatur +0 bis +40 °C, mit PP-Ventilkugel, auf Anfrage auch mit Kugel aus Edelstahl oder PTFE. Für Ø:6-8 mm, 8-10 mm oder 10-14 mm Aufdruck:geprägt oder schwarz

Les cuillères détectables SteriPlast® en polystyrène bleu sont fabriquées dans notre salle blanche, classe 7 (10.000), montées, emballées individuellement pour l'usage unique et stérilisées par irradiation gamma. Disponibles en deux tailles, 2,5 ml (cuillères à café) et 10 ml (cuillères à soupe), elles conviennent parfaitement au prélèvement de poudres, granulés, pâtes et liquides. En plus de leur couleur bleue, ces préleveurs possèdent dans leur matériau un additif les rendant visibles par des détecteurs de métaux ou par des rayons X. Ces produits peuvent donc, quoiqu'ils soient fabriqués en matière plastique, être éliminés par les systèmes habituels destinés au contrôle de corps étrangers. Matériel:PS détectable, bleu

Labor-Eimer für Transport, Umfüllen und Mischen. Sicheres Entleeren über den breiten Ausguss. Tragebügel aus Metall. Material:PE, weiß