Produse pentru echipamente laborator (313)

The spigot Compact for canisters and barrels captivates everyone through its compact build, which makes the valve on the canister ideal for use in refrigerators and on racks, etc. The short discharge does not protrude out over the lower edge of the container, which makes the valve a perfect choice even when space is very limited. The discharge's specially optimised design creates an even stream of liquid with no splashing or spattering. The spigot features easy motion and a tight seal. It is screwed on with a connecting cap nut. This guarantees a vertical position of the valve and makes it possible to adjust the valve later on. The Compact spigot fits all containers with G 3/4" connecting threads. PP, PE and PTFE are materials that offer outstanding chemical resistance to acids and alkalis. The Compact spigot is the ideal addition to the compact jerrycans – for perfect storage and filling when space is at a premium! Material:PP, PE and PTFE Thread, inflowing side:3/4'' inner thread cap nut

Cylindrical T hose connector to connect hoses. Material:PP, transparent

Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

Esta raspadora de alta calidad puede usarse para raspar, alisar, limpiar, enmasillar y eliminar sustancias pegajosas muy adherentes o incrustadas. El borde de esta raspadora de acero inoxidable resistente a la corrosión es ideal para mezclar o separar sustancias viscosas. La superficie lisa, robusta y sin costuras garantiza una limpieza óptima y cumple con los requisitos de higiene. Esta raspadora es una herramienta ideal para laboratorios, plantas de producción y salas blancas. Es perfecta para el uso en los sectores químico, farmacéutico, cosmético, de piensos y de alimentación y bebidas.

The high-quality scraper is suitable for scraping off, smoothing, cleaning, levelling out and also for removing strong adhesive, sticky substances or dried up media. The edge of the corrosion-resistant stainless steel scraper is ideal for blending and portioning viscous media. The smooth, seamless and sturdy surface ensures cleaning without difficulty and meets hygenic requirements. The scraper makes a suitable implement for use in laboratories, production and clean rooms. It is ideal for use under rugged conditions in pharmaceuticals, chemistry, cosmetics, animal feed and food & beverage.

The SteriBag Premium sample bags uniquely combine a high degree of security, sterility, tamper evident closure and traceability, they are used to securely transport and for the storage of samples. After sampling, the sample can be filled directly into the sterile sample bag. The tamper-evident closure seals the bag liquid-tight and secure. When trying to open the closure again, the word "STOP" appears clearly visible. Both the sample bag and the tear-off field are labeled with a unique tracking number, this allows a complete documentation and traceability. SteriBag Premium is suitable for many demanding applications in the food, pharmaceutical, medical area as well as in cleanroom or biotechnology sectors. Capacity:300 ml L x W:200x145 mm Pieces per pack:100

The SteriPlast® spoon for foodstuffs, made of polystyrene, is produced in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. The spoon for foodstuffs is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders, granulates, pastes and fluids. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The use of blue tools thus helps to meet the requirements of the HACCP hazard analysis and assessment in reference to foreign objects. This is an important criterion, especially in food processing and production and in the animal feed and pharmaceutical industry. Material:PS

Boquillas cilíndricas en T para la conexión de mangueras. Material:PP

Client-specific UVC sensor Mechanics adapted to customer needs Sensor with integrated amplifier Supply voltage ±5 V

Client-specific UVC sensor Sensor with integrated amplifier Supply voltage ±5 V Developed for application in drinking water

The SteriPlast® spatula for foodstuffs, made of polystyrene, is produced and assembled in our class 7 clean room (10,000), individually packaged for disposable use and then sterilised by gamma rays. As a result of the long, ergonomically-shaped, stable handle and a sharp blade, it is possible to even penetrate directly into containers such as paper or plastic sacks. The spatula for foodstuffs is ideal for sampling powders, granulates and pastes. The shade of blue that is used does not occur in a natural form in foodstuffs. Because of this, blue products or parts of them can be quickly found and easily identified in a visual check if they are ever mixed into production. The use of blue tools thus helps to meet the requirements of the HACCP hazard analysis and assessment in reference to foreign objects. This is an important criterion, especially in food processing and production and in the animal feed and pharmaceutical industry. Material:PS

Válvulas de retención con flecha de dirección grabada o impresa en color negro. Con boquillas cónicas. Múltiples aplicaciones. Temperatura de servicio: +0 a +40 °C

El acero y el aluminio hacen que el stop-it metal sea tremendamente resistente al calor y estable. La pinza para manguera se encuentra disponible en cuatro tamaños diferentes, para diámetro de manguera de hasta 30 mm. La pinza para manguera se puede utilizar allí donde se deba regular o bloquear el flujo en mangueras para líquidos o gases. Regulación del flujo sin escalonamiento: La tuerca moleteada de la pinza para manguera stop-it permite una regulación precisa y sin escalonamiento o una detención completa del flujo incluso en conexiones de manguera ya existentes. La manguera se empuja contra el gancho de acero estable, lo que evita que se produzcan daños en la misma. Material:Acero galvanizado y aluminio

Easy-Click-Verschluss – stop-it kann in jeder Position geöffnet und geschlossen werden – ohne lästiges Auf- und Abschrauben. Hochwertiges Material – stop-it ist aus dem hoch hitze- und chemikalienbeständigen Kunststoff PVDF gefertigt. Der Bügel ist aus Stahl, verzinkt. Die Schlauchklemme kann überall eingesetzt werden, wo der Durchfluss in Schläuchen mit Flüssigkeiten oder Gasen geregelt oder abgesperrt werden muss. Stufenlose Durchfluss-Regulierung: Mit der Rändelmutter der Schlauchklemme stop-it ist eine stufenlose, feinfühlige Durchfluss-Regulierung oder gänzliches Stoppen des Durchflusses auch an bereits bestehenden Schlauchverbindungen möglich. Der Schlauch wird breitflächig gegen den stabilen Stahlhaken gequetscht, eine Beschädigung des Schlauches wird so vermieden.

Cierre Easy-Click: stop-it se puede abrir y cerrar en cualquier posición, sin la incomodidad de atornillar y desatornillar. Material de alta calidad: stop-it está fabricado en PVDF, un material plástico altamente resistente al calor y a los productos químicos. El estribo está fabricado en acero galvanizado. La pinza para manguera se puede utilizar allí donde se deba regular o bloquear el flujo en mangueras para líquidos o gases. Regulación del flujo sin escalonamiento: La tuerca moleteada de la pinza para manguera stop-it permite una regulación precisa y sin escalonamiento o una detención completa del flujo incluso en conexiones de manguera ya existentes. La manguera se empuja contra el gancho de acero estable, lo que evita que se produzcan daños en la misma.

L'acier et l'aluminium rendent la pince stop-it métallique extrêmement robuste et résistante à la chaleur. Cette pince est disponible en quatre couleurs différentes, pour des diamètres de tuyaux jusqu'à 30 mm maxi. Cette pince peut être utilisée partout où le débit des liquides ou des gaz dans les tuyaux doit être régulé ou bloqué. Régulation progressive du débit : Grâce à l'écrou moleté de la pince stop-it, il est possible d'obtenir une régulation fine du débit ou un arrêt complet du débit même sur des tuyauteries existantes. Le tuyau est écrasé sur une grande surface contre le crochet métallique, ce qui permet d'éviter un endommagement du tuyau. Matériel:Acier zingué et aluminium

StopCock angled Thread, inflowing side:3/4'' inner thread cap nut Thread, outflowing side:spout/nozzle

Fermeture Easy-Click – La pince stop-it peut être ouverte et fermée dans n'importe quelle position – sans vissage ni dévissage. Matériau de haute qualité – La pince stop-it est constituée de PVDF, qui est résistant à la chaleur et aux produits chimiques. L'étrier est en acier zingué. Cette pince peut être utilisée partout où le débit des liquides ou des gaz dans les tuyaux doit être régulé ou bloqué. Régulation progressive du débit : Grâce à l'écrou moleté de la pince stop-it, il est possible d'obtenir une régulation fine du débit ou un arrêt complet du débit même sur des tuyauteries existantes. Le tuyau est écrasé sur une grande surface contre le crochet métallique, ce qui permet d'éviter un endommagement du tuyau.

Le racleur de haute qualité est approprié pour gratter, lisser, nettoyer, enduire ainsi que pour éliminer des substances collante adhérant fortement ou des fluides séchés. Le bord du racleur en acier inoxydable résistant à la corrosion est idéal pour couper ou diviser en portions des produits visqueux. La surface lisse, sans raccord et robuste garantit un nettoyage sans problème et satisfait les exigences hygiéniques. Ce racleur est approprié comme moyen auxiliaire dans le laboratoire, la production et dans la salle blanche. Il convient à l’utilisation solide dans les industries chimique, pharmaceutique, cosmétique, agroalimentaire et des boissons.

The sterilised sampling bag SteriBag for samples in chemistry, pharmaceuticals, medicine, veterinary science and foodstuffs etc. The bags are made of polyethylene and are therefore exceptionally tearproof and leakproof. The SteriBag sampling bag is distinguished by its safe handling. When used according to instructions, samples are guaranteed sterile. Integrated safety: The tab-ends are sealed in plastic film to prevent skin injuries. Material:PE

Abrazadera de rosca de acero inoxidable con rosca fina de acero R 2" exterior por diámetro del tubo 32 mm.

Embouts cylindriques en T pour le raccordement de tuyaux Matériel:PP

The Bruker Optics` Cryogenic Silicon Analysis System (CryoSAS) is a dedicated all-in-one system for the low temperature (<15K) impurity analysis of Silicon. CryoSAS is optimized for operation in the industrial environment. CryoSAS combines Bruker's high performance FTIR spectrometers with built-in, closed-cycle cryo-cooling technique that does not require any liquid Helium. All CryoSAS components are state-of-the-art, yet utilize proven technologies to accomplish a difficult analysis in the demanding silicon production environment. CryoSAS can be operated at a high level of automation including accurate reporting of the analysis results.

The FT-NIR spectrometer MPA III is designed to meet the demands of today’s and tomorrow’s quality control. It combines outstanding flexibility and high performance with an easy-to-operate interface. • Full line of sample presentation options for all NIR applications • Software-controlled module selection, no manual exchange required/ • Low cost of ownership thanks to high quality components with long life time • Easy calibration transfer to other Bruker lab, at-line or process spectrometers • Fully cGMP and 21 CFR Part 11 compliant, supports validation according to USP and Ph.Eur 2.2.40

The external accessory PMA 50 has been specially developed for Polarization Modulation measurements. It can be adapted to Bruker TENSOR, INVENIO and VERTEX FTIR spectrometers. All optic and electronic components in the PMA 50 module are optimized for the Polarization Modulation. Both linear dichroitic measurement techniques like PM-IRRAS and circular dichroitic experiments like VCD spectroscopy can be realized using this dedicated system. The core of the Polarization Modulation technique is the Photoelastic Modulator (PEM) with a nominal modulation frequency of 42 kHz. With the help of the parallel 24-bit dual-channel data acquisition technology the sum and the difference signals can be collected simultaneously with highest sensitivity. The PMA 50 module exhibits short beam path, and therefore provides optimal S/N ratio and stability.

The FTIR spectrometer ALPHA II combines outstanding quality with a small footprint and sets a benchmark in terms of user convenience. With the integrated panel PC and the touch-based operation, FTIR spectroscopy has never been easier. The ALPHA II features a new way to operate an FTIR spectrometer. With the integrated panel PC and the dedicated OPUS-TOUCH user interface it takes only three touches for measurement, evaluation and report generation. OPUS-TOUCH is very intuitive and guides you conveniently through the measurement and evaluation process. Alternatively the ALPHA II can also be operated with an external PC.

Thermogravimetric analysis (TG) follows changes in mass of the sample as a function of temperature and/or time. TG gives characteristic information about the composition of the measured sample, in particular the amounts of the various components and their thermal behavior. In addition, further measurements are possible such as kinetic analysis of thermal decomposition. The identification of gases released directly from the sample or during thermal treatment cannot be performed just by thermal analysis, but coupling a spectroscopic method such as Fourier-Transform-Infrared (FTIR) spectroscopy is an excellent solution. IR spectroscopy is a classical technique, which depends upon the interaction of infrared radiation with the vibrating dipole moments of molecules. It gives, with the exception of homonuclear diatomics and noble gases, a characteristic spectrum for each substance.

SiBrickScan (SBS) is a dedicated at-line system for the FTIR quantification of interstitial Oxygen in complete Silicon ingots, resulting in a concentration profile along the longitudinal axis. Accessing this information without sawing wafers or test samples is a major and cost saving advantage. Get Valuable Information to Check and Optimize Product Quality Knowing the Oxygen gradient of Si ingots enables important conclusions helping e.g. to control and optimize the Silicon crystallization process or to identify batches of bad raw material. Therefore SBS will help to save costs by optimizing product quality and reducing the amount of defective wafers. The random sampling of individual ingots does strongly reduce sample preparation efforts and provides relevant information much earlier.

MATRIX-MF is a rugged and a compact spectrometer that can be fiber optically coupled to measure chemical reactions in laboratory and/or process environments. Bruker's MATRIX-MF FTIR spectrometer expands the proven MATRIX series product line utilizing the information rich mid-IR region for use in both laboratory and process environments. The MATRIX-MF is a process ready FTIR spectrometer that is ideal for real-time monitoring and analysis of chemical and biological reactions.

Innovative, powerful and easy to operate, this and more is BRAVO the handheld Raman spectrometer from Bruker. BRAVO relies on the proven Bruker combination of innovation and quality and combines latest technologies for an unparalleled performance. The patented fluorescence mitigation using Sequentially Shifted Excitation (SSE™) enables the measurement of a much wider range of materials than ever before using handheld Raman spectrometers. Duo LASER™ excitation with two lasers offers the highest sensitivity in a large spectral range from 300 cm-1 to 3200 cm-1 including the CH-stretching vibrations. Furthermore, BRAVO supports the most efficient and clearly laid-out workflow on a large 7 inch touch screen display. This and many more form the basis of a unique product especially designed for raw material verification of finished products in the pharmaceutical industry.