Produse pentru echipamente laborator (389)

The swan-neck jet produces a fine, straight spray with no lateral spatter. Dangerous lateral spatter does not occur. Material:LDPE

Stabile Flasche mit Plombierösen an Schraubverschluss und Flasche. Besonders geeignet für den Probenversand. Erhöhte Probensicherheit durch Plomben. Weite Öffnung, daher leicht zu befüllen. Speziell für dickflüssige Medien, Pulver, Granulate und Pasten. Material:HDPE

Avec le tirage d’échantillon triple multiple Novartos Uno, il est possible de prélever un échantillon multipoint triple de plusieurs zones d’échantillonnage prédéfinies. Pour le tirage d’échantillon triple, suivant la longueur, quatre, sept ou neuf chambres collectrices sont équipées de trois garnitures d’échantillon respectivement.

Cuchara para tomar muestras pequeñas. Su forma especial le permite llegar a cualquier rincón del recipiente y evita que la muestra se escurra. Capacidad:2 ml Longitud:150 mm Material:Acero inoxidable V2A (1.4301)

Cuillères d'échantillonnage pour le prélèvement de petites quantités d'échantillons. La forme spéciale de la cuillère permet d’atteindre le moindre recoin du fût et empêche l’échantillon de glisser de la cuillère. Contenance:2 ml Longueur:150 mm Matériel:Inox V2A (1.4301)

Les spatules détectables SteriPlast® en polystyrène bleu sont fabriquées dans notre salle blanche, classe 7 (10.000), emballées individuellement pour l'usage unique et stérilisées par irradiation gamma. La longue poignée stable et ergonomique, ainsi qu'une lame pointue permettent de perforer directement les sacs en papier ou en plastique, même avec cet article jetable. Elles conviennent parfaitement au prélèvement de poudres, granulés et pâtes. En plus de leur couleur bleue, ces préleveurs possèdent dans leur matériau un additif les rendant visibles par des détecteurs de métaux ou par des rayons X. Ces produits peuvent donc, quoiqu'ils soient fabriqués en matière plastique, être éliminés par les systèmes habituels destinés au contrôle de corps étrangers. Matériel:PS détectable, bleu

Stainless steel measuring spoon in a set of 4, as a measuring aid for fast and easy measuring from 1.25 to 15 ml. The volume is engraved on the handle of each measuring spoon. Material:AISI 304 (1.4301) Capacity:1.25 - 15 ml

Trockengranulierung ist für großvolumige Produkte oft der Prozess der Wahl. Die BRC-Granulierer der BRC-Serie von L.B. Bohle realisieren Produktionsbandbreite von <1 - 400. Die Trockengranulierer der BRC-Serie können als Einzelmaschine oder integriert in eine kontinuierlichen Fertigungslinie betrieben werden. Im Vergleich zur klassischen Feuchtgranulation sind bei der Trockengranulation keine energieintensiven Trocknungsprozesse notwendig. Dies bedeutet hohe Einsparungen in den Bereichen Ausrüstung, Technik und Produktionsräume und führt zu geringeren Kosten pro Batch. Die Kompaktierkraft und Schülpendicke werden im BRC innovativ geregelt: Das Material wird gleichmäßig kompaktiert und eine Produktion von 1-400 kg/h ist realisierbar. Bei der Konzeption der Anlage wurde besonders auf Benutzerfreundlichkeit und Ergonomie, schnelle Reinigung und eine einfache Demontage geachtet.

Mit QbCon® 1 bietet L.B. Bohle die optimale Einstiegsanlage in den Bereich Continuous Manufacturing. Der echt-kontinuierliche Feuchtgranulierer und Trockner für die Forschung und Entwicklung garantiert eine Steigerung der Produktqualität bei gleichzeitiger Erhöhung der Flexibilität und Bedienersicherheit. Durchsatz: 0,5-2,5 kg/h

Die Granulationsanlage vereint die Prozesse High-Shear Granulation und Wirbelschichttrocknung in einer Anlage. Durch die Positionierung der Anlagen nebeneinander ist das Modul besonders platzsparend. Platzbedarf, Flexibilität und Ressourceneffizienz sind neben der Langlebigkeit der Anlage und der Prozessqualität entscheidende Kriterien bei der Investition in eine Granulationsanlage. L.B. Bohle bietet mit der kompakten Granulationsanlage eine herausragende Lösung. Der High-Shear Granulierer und die Wirbelschichtanlage sind nebeneinander positioniert und erzielen einzeln oder kombiniert hervorragende Produktionsergebnisse.

The 3D UV test chamber BS-05 is a large irradiation chamber for double-sided, 3D irradiation of samples with UV or visible light. A sample plate made of stainless steel or fused silica or a rotating holder for mixing of fluids are available. Like all BS irradiation chambers, the BS-05 offers time- and dose-controlled irradiation of samples with UV light. The chamber can be fully equipped for one of the spectral ranges UVC, UVB, or UVA to achieve the highest irradiance. Alternately, the use of two separately controlled lamp groups for different spectral ranges allows for especially flexible operation of the chamber. The large irradiation chamber of the test chamber has a base area of 86 x 65 cm² and a height of 32 cm. The maximum sample chamber temperature during operation is approx. 25 °C, so that thermal damage to the samples is avoided. Due to the high homogeneity of the irradiation, the samples can be positioned as required. Interior chamber:86 x 65 x 32 cm Dimensions:95 x 87 x 75 cm Power consumption:900 W Lamp lifetime UVA:up to 4.000 h Lamp lifetime UVB:up to 4.000 h Lamp lifetime UVC:up to 9.000 h Irradiance UVA:8 mW/cm² Irradiance UVB:2..4 mW/cm² Irradiance UVC:4..8 mW/cm²

Der Eintopfgranulierer VMA wurde speziell für die Anforderungen der Pharmaindustrie konzipiert. Die Prozessschritte Mischen, High-Shear-Feuchtgranulation und Trocknung finden in einem Behälter statt. Der Eintopfgranulierer VMA wurde von L.B. Bohle für eine effektive Granulation entwickelt. Dabei bietet der Eintopfgranulierer ideale Bedingungen für die Feucht-Granulation von hochwertigen, pharmazeutischen Produkten. In einem geschlossenen Behälter im Vakuum werden drei Prozesschritte Mischen, Highshear-Feuchtgranulation und Trocknung durchgeführt. Der Eintopfgranulierer VMA erzielt – selbst bei niedriger Wirkstoff­Dosierung (<1 %) – eine hohe Misch­ und Granulationseffizienz. Eine effektive Trocknung findet auch bei niedrigen Temperaturen im Vakuum statt. Dies eignet sich besonders für temperaturempfindliche Produkte. Die kleine Produktkontaktfläche ermöglicht eine schnelle und einfache Reinigung sowie schnelle Produktwechsel.

The Agilent Cary 60 spectrophotometer measures the direct transmission and reflection. With the Opsytec integrating sphere you can also measure the diffuse transmission and reflection of translucent samples. Liquid and powder samples can also be measured using the extensive accessory set. Even geometries such as 0° and 8° are supported. Perfect for comprehensive material characterization! Enrich your spectrophotometric measurements with our highly reflective integrating sphere, specially developed for the Agilent Cary 60 spectrophotometer. This sphere guarantees precise, reliable and highly accurate reflectance measurements in research laboratories, quality control departments and scientific institutions. Diameter:50 mm Material:PTFE

The UV measuring probes with 14 mm diameter only serve as compact, long-term, stable measuring heads for the supervision of UV irradiation systems and for UV measurements in inaccessible locations. In addition, optional water and light guide adapters enable the application in hot locations and in water disinfection systems. The integrated electronics generate a signal voltage that is transferred to the UV monitor RM-31 or to the PLC with low noise by a shielded cable.

High UV irradiance combined with a uniform irradiated area is the key feature of the surface LED series SFL-UV. The SFL-UV modules are water-cooled high-power UV LED sources with an intelligent LED driver. The absence of ineffective infrared radiation reduces the heat compared to conventional UV lamps. Three standard sizes are available with light-emitting areas of 100 x 100 mm to 200 x 200 mm. Customized sizes are available on request. Independent of size, we offer two versions. The HO versions reach high irradiance of up to 5500 mW/cm², while the ECO versions still offer up to 2000 mW/cm². Both irradiances are measured at a distance of 10 mm to the emitting window. The high irradiance allows extremely short processing times. Wavelengths of 365, 385, 395, 405, and 450 nm are available for many different applications. Wavelength:365, 385, 395, 405 or 450 nm Connections:Trigger in, dimming in (0-10V) Programming, optional:RS485, RS232 or USB Internal security circuit:Over-temperature, LED N.C. Optical feedback, opt.:internal and external sensor

The compact spectroradiometer SR900 is a high-resolution measurement system for quick and precise measurements in the UV range, the visible spectral range and the IR. The spectroradiometer consists of an array spectrometer without any moving parts and a silicon detector with 2048 pixels. The spectral resolution is 0.4 nm. The SR900 is combined with a SMA-905 quartz light light guide and our radiometric sensor heads for measuring the irradiance and illuminance.Traceable to the PTB, the SR900 is factory-calibrated. A DAkkS test in our accredited laboratory is optionally available. The SR900 thus enables exact spectroradiometric measurements for the assessment of irradiances and illuminances, biological effectiveness and color measurements. Due to the nearly scatter-free construction, a high sensitivity in the UV range is reached. Control and data evaluation is carried out by the spectral software SRpro. With trigger input and output, the SR900 is also suitable for automated measurements. Dimensions:177 x 125 x 45 mm Weight:1.2 kg Power:< 3 W Operating temperature:5 to 40 °C Storage temperature:-10 to 60 °C

Der Highshear-Granulierer GMA von L.B. Bohle ist für die Feuchtgranulation optimiert. In einem geschlossenen Behälter wird den pulverförmigen Partikeln eine Bindeflüssigkeit zugeführt. Der Highshear Granulierer GMA wurde für pharmazeutische Anwendungen konzipiert und entwickelt. Während der High-Shear Granulation werden besonders dichte Granulate gebildet. Ein Zerhacker verhindert dabei, dass die Granulate übermäßig wachsen und verteilt die Granulierflüssigkeit im Produkt.

The UVpad is the world‘s thinnest spectral measuring and autonomous UV radiometer. It combines scientific measurement technology with a compact and user-friendly instrument. With its innovative measuring principle, it doesn't use optical filters. UV light is spectrally detected and analyzed in the UVpad. Thus, measurements are traceable to national standards. Since it works without a filter, it is particularly suitable for the measurement and comparison of different lamps. All measurement data are displayed on the device immediately; 50 measurements are stored in the UVpad and can be read via USB. The supplied PC software evaluates the irradiance intensity profiles measured separately for UVA, UVB, UVC, and VIS. Spectrum and measurement data can be exported and saved. Optionally, UV systems can be optimized due to saved operating functions such as, for example, the absorption spectra of photo initiators. Thus, the operation costs can be reduced and the product quality can be ensured. Dimensions:160 x 100 x 14,4 mm³ Weight:~ 375 g Operation temperature:10 -70 °C Battery:internal LiIon accu Memory:50 measurements

The UVpad E combines the benefits of the spectral measuring technology with a handheld and easy to operate radiometer. The UVpad E is technically based on our successful radiometer UVpad. With the external sensor and an optimized programming, it is even more precise and easier to operate. Use the spectroradiometer UVpad E for an accurate measurement of the UV irradiance and for comparisons of different UV lamps and UV LEDs. 512 photodiodes measure the spectrum in the wavelength range of 240 – 480 nm. The categorization in UVA, UVB and UVC is taken according to international standards and traceable. The calibration to only one light source is omitted. Spectral range:240 - 480 nm ± 5 nm Spectral bandwidth:2 nm Pixel distance:~0,5 nm Irradiance meas. range (typ.):2 - 5000 mW/cm² Irradiance meas. range (high power version):25 - 20000 mW/cm²

The mains-driven panel meter RM-32 provides a continuous and precise measurement of irradiance with preamplified UV sensors. The integrated electronics produce a signal voltage that is transmitted to the radiometer, so that inferences are minimized. Different UV and visible spectral ranges, measuring ranges, and output signals can be selected to match the measurement task. The current irradiance is shown on a 3.5-digit digital display. The lamp state with respect to two threshold values is indicated by LEDs. Two relay contacts can be used for switching warning and failure signals. With its optional USB, RS232 or RS485 interface the RM-32 can be used to monitor ultraviolet (UV) irradiance. Control of light sources and irradiation systems Precise measurement of irradiances UV monitor for process control and documentation Dimensions:DIN 43700 96 x 48 mm Depth:~ 115 mm Weight:410 g Mains:230 V, 50 Hz, 3 W Operating temperature:0 to 40 °C

The very high irradiances of up to 39,000 mW/cm² and the compact dimensions characterize the UV-LED Spots and allow extremely short process times. For this purpose, the UV-LED is focused at the desired working distance. The UV-LED Spot P is suitable for automated and manual bonding. For applications such as bonding, potting or fluorescence excitation, the wavelengths 365, 385, 395, 405 and 450 nm are available. With the variety of wavelengths as well as the exchangeable optics, you remain particularly flexible and can upgrade and change over at any time. For controlling the UV-LED Spot P, we offer the LedControl S as a table top device or the LedControl DC for DIN rail mounting. With the LedControl S and DC UV LED controllers, the ultraviolet LED output can be set between 2% and 100%. Wavelength:365, 385, 395, 405 o. 450 nm Dimensions, Spot P:Ø 15 x 143 mm Dimensions, Spot P short:Ø 15 x 60 mm Cable length:1,5 m Weight:~130 g

The RMD radiometer is one of the latest developments from Opsytec Dr. Gröbel GmbH. This easy-to-use radiometer is based on more than 30 years of experience in all areas of irradiation and illuminance measurement. It features a wide dynamic range and extremely low noise. For this purpose, the sensor already contains a multi-stage amplification, an extremely precise analog-to-digital converter and a temperature sensor. The memory contained in the sensor contains all sensor identifications and the calibration history. This allows several ultraviolet sensors and visible sensors to be used on the Radiometer RMD. A wide range of sensors is available for a wide variety of production and control processes. Two sensors can be read out simultaneously. Sensors for the evaluation of erythema-weighted radiation and multi-channel sensors are also available. The measurement data are clearly displayed on the graphic display. Spectral range:UVA, UVA+, UVBB Resolution:0,001 µW/cm² Dimensions:Ø 40 mm, h 35 mm Weight:160 g Connecting cable:2 m

The high-performance UV LED Solo P combines a compact, variable, and economic point light source for manual bonds in an ergonomic design. The UV LED Solo P requires no external control and can be operated directly with a mains power adapter. As all UV LEDs the Solo P is quickly switchable. WAVELENGTH, BEAM PROFILE, AND OPTIC The wavelengths of 365, 385, 395, 405, and 450 nm are available for different applications. In addition, several beam profiles with interchangeable optics are available. The UV radiation of high-power LED is focused in the desired working distance. The high irradiance of 24,000 mW/cm ² allows for short processing times. APPLICATIONS OF HIGH-POWER UV-LED SOLO P UV curing and bonding and UV sealing Micro curing Irradiation of biological samples Hairline or leak detection using fluorescence markers Wavelength:365, 385, 395, 405 or 450 nm Max. irradiance:> 24000 mW/cm² Dimensions:Ø 15 x 143 mm Weight:~130 g Operating voltage:100 - 240 V, 50/60 Hz

The PLC.D sensors are ready-to-install UV sensors with digital output. This enables reliable and repeatable irradiance measurements in UV systems. Due to the compact design and the eight spectral ranges, the sensors can be used for a wide range of applications, e.g. in packaging facilities sterilisation surface activation systems UV curing systems ageing tests and many other applications With the integrated 24-bit ADCs, the PLC.D sensors close the gap between industrial manufacturing and high-precision laboratory equipment. Measurements can be carried out in a simple yet safe way. RS-485 and USB are available as optional connections for this purpose. The data evaluation takes place directly in the PLC.D sensors, the measured values are protected against transmission errors by a CRC-16 check sums. Operation voltage:24 V (RS-485 / RS-232) Dimensions:80 x 40 x 20 mm Weight:150 g Connector:Built-in plug, M8, 8-pin Response time, max:200 ms

Xenon excimer lamps enable new, resource-saving and more efficient production possibilities. They are used in the field of surface treatment for matting, cleaning, surface activation or to save photoinitiators. For this purpose, the narrow-band spectrum around 172 nm is usually used to irradiate under inert gas conditions. Then the high photon energy is sufficient to split almost all organic compounds. The measurement of 172 nm (VUV) is an important component for process control and optimization. With the tinyTracker 172 we offer a calibrated band radiometer which is suitable for use in an inert atmosphere. The tinyTracker 172 is absolutely calibrated and measures the irradiance and irradiation dose of xenon excimer lamps directly at 172 nm. Due to its particularly flat design, the tinyTracker172 can be guided through the irradiation channels of UV belt dryers and other industrial equipment. Measuring range:0-200 mW/cm² Resolution:12 bit Recording time:up to 3 hours Sampling frequency:1 - 100 Hz, adjustable Photo detektor:GAP

Les béchers de mesure en PP sont pratiquement incassables et hautement transparents. Les béchers de mesure sont parfaitement adaptés comme supports de publicité pour des produits chimiques. Leur surface lisse permet également l'impression d'un logo ou d'un message publicitaire. Material:PP, transparent

tinyTracker dosimeters are autonomous instruments for irradiance and dose measurement in UV belt systems. Due to the particularly flat design of the tinyTracker, this can be performed by irradiation of UV conveyor dryers and other industrial equipment. The recording of values automatically starts when exceeding an adjustable minimum irradiance. The integrated radiometric sensors can be configured for different UV and visible spectral ranges. The integrated diffuser serves for cosine correction that is necessary in non-perpendicular irradiation. The sensors are calibrated to PTB. The data recording is done on a removable SD card, data transfer - via USB. The power is supplied by a Li-Ion battery that provides a recording time of up to three hours. The Li-Ion battery can be charged directly via the USB interface. An additional power supply unit is included. The analysis and data export are done conveniently using a PC. HIGHLIGHTS OF TRACKER FOR UV CONVEYOR BELTS Measuring range:0-200 mW/cm² or 0-2 W/cm² Resolution:12 bit Recording time:up to 3 h Dimensions tinyTracker:195 x 79 x 10 mm Operating temperature:up to 60 °C

Différents équipements peuvent être montés sur la tige télescopique (raccord à encliquetage). Chaque tige dispose d'une butée. Ainsi, il est impossible de provoquer une désolidarisation par accident d'une tige. Les tiges télescopiques ne permettent pas de rotation, pour une prise en main encore meilleure ! Tige télescopique 5355-0280, modèle extrêmement court – mais extensible jusqu'à 280 cm. Peut être rangé dans tout coffret ! Le puisard à tige télescopique est un système de prélèvement disposant de multiples équipements pour des applications diverses. Les équipements (bécher à angle variable, bécher sur balancier, porte-flacons, bécher en inox et épuisettes) sont raccordés par encliquetage sur la tige télescopique. Idéal pour le prélèvement en bassins, cuves, puits, plants d'eau, etc. Les tiges téléscopiques en aluminium réglables en longueur permettent d'atteindre une profondeur de 6 m. Longueur réglable graduellement de:65 cm - 600 cm

We offer LED technologies for existing applications. With our modular concept, combined with our calibration laboratory and in-house production we offer decisive development advantages. POSSIBLE REASONS FOR CUSOMIZED UV-LED: The system already exists. Standard products can’t be installed due to limited space. Irradiation from one direction is not sufficient The determination of irradiation wavelength has not yet taken place You are looking for a competent and independent partner YOUR ADVANTAGES WITH OPSYTEC UV-LED CUSTOMIZED SOLUTION: Development and production from a single source Ideal for small batches, tests and prototypes Wavelength 275 nm, 365 nm, 385 nm, 395 nm and 405 nm available Further wavelengths are possible Suitable sensor? We offer customer-specific solutions, too Reliable results through our own calibration laboratory Special solutions are beneficial - even for small quantities. Ask us!

Esta pinza de acero inoxidable está diseñada para los trabajos de máxima precisión en el laboratorio. La pinza es recta y tiene extremos sin punta y con rugosidades en la cara interior. Estas características permiten manipular con total precisión diferentes materiales, tejidos y muestras. La pinza de laboratorio está hecha de acero inoxidable y tiene rugosidades en el mango. Material:Acero inoxidable V2A (1.4301)