Produse pentru cupru permatex (18)

copper vase

TECHNICAL SPRAYS

ΜETAL PRIMER of COSMOCHROME is a high quality undercoat for enamel paints for use on metallic surfaces. It is also suitable for yellowing surfaces. It has very good working properties, with strong adhesion and great covering power. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Brown, Grey, White

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

Waterbased pigmented primer for all types of masonry substrates. Suitable even on fresh concrete and mortar. Features Excellent adhesion to concrete. Excellent alkali and efflorescence resistance. Excellent water resistance. Good UV resistance. Interior and exterior. Eco friendly. Solvents free. Ready for use, do not dilute.

Mineral Plus

Kupferhartlot "Cu-Rophos 2", DIN EN 17672 - CuP279 (L-Ag2P) 2,00 mm vierkant, 500 mm Stäbe, 1,000 Kg Kartons, 25,- kg Umkartons

Funnel made of copper

Additive der Marke PROFI-CAR helfen Ihnen Motor, Kraftstoff- und Kühlersystem in optimalem Zustand zu halten. • Kraftstoffsparend • Verbrennungsoptimierend • Reinigt und schützt das gesamte Kraftstoffsystem • Schützt Motor und Getriebe und vermindert den Verschleiß • Verbessert die Laufeigenschaften • Schließt kleinere Undichtheiten an Motor und Kühlersystem • Beugt Kühlerschäden vor • Verbessert das Umweltverhalten

ADLER PUR-based coatings are modern solvent-based systems that meet the most demanding standards in furniture and interior decoration. The best resistance, both for chemical and mechanical stresses and strains, as well as ease of application and use are the special features of this type of coating system. ADLER offers the best choice of PUR-based coatings for the most diverse types of wood as well as the most varied design concepts. Premium quality and efficient use are always ensured in the process. In this manner, you can meet almost any need or requirement for the surface as desired by your customers.

Due to high surface hardness and low surface abrasiveness, it is characterized by good slip and good resistance to friction, does not dissolve and does not swell in all used solvents, in fuels and mineral oils. It is most often used for the production of precision machine parts, such as gears, worm gears, bushes, etc

Leather Sole Adhesive The NEOPRENE 1 is a plychloroprene adhesive with high crystallization used for cold sticking of LEATHER SOLES, for the assembly of the GUARDOLO and for the to pair LEATHER-LEATHER and LEATHER-TUNITH. High bond strenght. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Complex of 3 standardized types of curcuminoids with improved formulation of vitamin D3, B6, B12 and mineral selenium. 1 capsule contains 427 mg of curcuminoids, which is equivalent up to 8.500 mg of native curcuminoids with 20 times increased bioavailability. Improved formula of high-quality food supplement Curcumin C3 Complex Premium enriched with vitamins D3, B6, B12 and the mineral selenium, which contribute to the normal function of the immune system. Curcumin C3 Complex® is a patented and clinically tested “bioprotectant” composed of 3 main compounds: Curcumin, Demethoxycurcumin (DMC) and Bisdemethoxycurcumin (BDMC) – commonly known as curcuminoids.

SOLVENT PAINT of COSMOCHROME is a high quality undercoat for concrete surfaces (concrete columns, concrete floors, walls, ceramic tile roofs etc). It is highly durable against extreme weather conditions and atmosphere pollution. It has strong adhesion, great covering power and extreme hardness PACKAGE:0,75 LT, 10 LT, 2,5 LT COLOR:Black, Cypress Green

EUROCOAT of COSMOCHROME is a high quality rust primer produced with excellent european materials. It is an ideal primer undercoat for the protection of all metallic surfaces from rust.It is suitable for interior and exterior use. It can be applicated with brush or spray gun. Thinning 10% with white spirit or turpentine for use with brush and 20% for use with spray gun. PACKAGE:0,375 LT, 0,75 LT, 10 LT, 2,5 LT, 20 LT COLOR:Black, Cypress Green

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT COLOR:Black, Blue

Weichlötflußmittel "Cu-Roplus", ausgezeichnet mit dem RAL-Gütezeichen der Gütegemeinschaft Kupferrohr e.V., DIN EN ISO 9454, 3.1.1.C, 100 g Dosen mit Pinselköcher, DVGW-Prüfzeichen: DV-0101 AT 2243 (Fl 009)

Belongs to the most popular thermoplastics with constructional application. It owes its popularity to special properties, such as high mechanical strength, excellent sliding properties, high impact resistance, good chemical resistance, damping ability and machinability (turning, milling, cutting)