Produse pentru cupru permatex (11)

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l

Copper Ore Copper (Cu),%:25.0 Min Cadmium(Cd), %:0.05 Max Flourine(F), %:0.10 Max Moisture(H2O), %:5.0 Max Lead(Pb), %:5.00 Max Mercury(Hg), %:0.01 Max Arsenic(As), %:0.50 Max Size:0-100mm

Copper (from the latin word “cuprum”) is a soft, malleable, ductile and highly conductive metal. Its name is given to the fact the metal was principally mined in Cyprus (aes cyprium) in the Roman era. With its symbol Cu and its characteristic red-orange colour, Copper was the first metal to be used by men (over 10000 years ago) and the first to be alloyed with another metal to create Bronze (more than 5000 years ago). It is today used as a conductor of heat and electricity, as a building material and as a constituent of various metal alloys.

Der erste Rostschutz für Transport, Lagerung und Produktion Eigenschaften: -Gute Haftung -Guter Rostschutz (bis zu einem Jahr für Außenanwendungen) -Verdeckt Konstruktionsfehler -Blei- und chromatfrei -12m²/l (35 µ Schichtdicke trocken) -Guter Verlauf -Nicht giftig als schweißbar Anwendung: Der perfekte Untergrund für viele verschiedene Farbsysteme (u. a. CombiColor). Verwendung auf blanken, kalt gewälzten, gebeizten, gestrahlten oder leicht angerosteten Stahloberflächen. Ideal für Werkstätten und Konstruktionsfirmen. Ideal für Sprühanbringung - Rust-Oleum 150 als Verdünnung beim Spritzverfahren anwenden. Achtung Nicht für hochwertigen Korrosionsschutz geeignet.

Wird eine Körpergewichtsabnahme mittels Sport und Diät angestrebt, wird Carnitin als Ergänzung empfohlen, um einen besseren Umsatz der Fettsäuren zu erreichen. Wird eine Körpergewichtsabnahme mittels Sport und Diät angestrebt, wird Carnitin als Ergänzung empfohlen, um einen besseren Umsatz der Fettsäuren zu erreichen, da der Stoffwechsel bei Übergewichtigen in der Regel nicht an die körperliche Leistung angepasst ist. Insbesondere Ausdauersportler nehmen L-Carnitin häufig als Nahrungsergänzungsmittel zu sich, da durch die Einnahme von L-Carnitin Leistungssteigerungen erzielt werden können. Diese Leistungssteigerung bezieht sich auf die Regeneration nach einer großen sportlichen Anstrengung. Carnitin wird im Sport daher als einer der am stärksten wirkenden Leistungsförderer und Fatburner gehandelt.

PLASTISOL INKS PHTHALATE-FREE AND WITH LOW MIGRATION FOR DIRECT AND TRANSFER SILK-SCREEN PRINTING PLASTISOL INK EXTRAFLEX XFE Extraflex XFE is a range of screen printing phtalate-free plastisol inks suitable for print onto any kind of fabric. The charateristics of Extraflex XFE inks grant a low bleed onto coloured synthetic fabrics. The series is composed of ready-to-print colours, bases and additives. XFE colours are ideal for “wet on wet“ printing, while on Lycra it is advisable to flash cure between colours. These inks are also suitable for the printing of cold and hot peel transfers. READY TO PRINT COLOURS All Extraflex XFE colours enjoy optimal charateristics of coverage and printability (up to 305 mesh, 120T) and are suitable to direct print onto any kind of fabric. Process series is particulary suitable for the creation of four colours process prints with screens of 305 mesh (120T).

Une utilisation simple et rapide 1 Installez simplement le PadXpress sur votre lustreuse (2000 tours/minute maximum) 2 Pressez une fois sur la carrosserie pour appliquer du produit 3 Lustrez la surface à traiter quelques secondes 4 Un coup de chiffon et c'est terminé ! Ce traitement permet de déposer un film protecteur céramique sur le véhicule en 30 minutes ! Le véhicule aura été préparé auparavant. À base de nanoparticules de céramique, ce traitement confère une grande résistance aux impacts, coups de portières, projections routières et variations thermiques que la carrosserie peut subir. Ce traitement céramique dispose d'une une très longue durée de vie dés lors que les lavages de la carrosserie sont réalisés à la main sans produit détergent et avec un savon liquide adapté - Le PH NEUTRE de cette solution préserve la peinture et la carrosserie. Un produit fabriqué en France Le PadXpress dispose d’un réservoir intégré pour un rendement maximum. Positionné sur une...

COMPLEMENTO ALIMENTICIO A BASE DE POTASIO Presentación:50 comprimidos Composición:Citrato de potasio 108,18 mg (equivalentes a 300 mg de Citrato de Potasio), agentes de carga Modo de empleo:Tomar 3 comprimidos al día, uno antes de cada comida Dosis diaria recomendada:3 comprimidos

Nous fournissons tout type de ciment colle fabriqué selon la norme EN 12004 : du Cilement colle basique (C1) à ciment colle haute performance (C2TES2)

Référence GCNOIRPIS-25KG

Hydroquinone is produced as an inhibitor, an antioxidant, and an intermediate in the synthesis of dyes, motor fuels, and oils; in photographic processing; and naturally in certain plant species, Hydroquinone is a phenol derivative with antioxidant properties that can cause toxicity in several organs, notably the kidney. Used as a topical treatment for skin hyperpigmentation and in various cosmetic products, it is metabolized mainly to glutathione conjugates and forms mutagenic DNA adducts in in-vitro systems. (NCI04)