Produse pentru cosmoteer (9)

Mikrosana Mikrosana is a mixture of cement-free binders, recommended for injecting consolidation of brick, stone and mixed structures. Its hydraulic grip is based on the active lime-microsilica reaction and the presence of hydraulic calcium free of harmful soluble salts. Its exceptional fluidity, coupled with extremely small particle size, allows it to penetrate less than 1.5 mm pores and cracks. The addition of natural and artificial pozzolans allows progressive hydration and hardening beyond the standard 28 days of ripening. Mikrosana, thanks to its particular constituents, is totally compatible with old mortars, which makes its use particularly recommended for the injection consolidation of antique plasters, even in the presence of frescoes. "• Extremely low hydration heat; • High water vapour permeability; • Low elastic modulus; • Good mechanical resistance with slow and gradual mechanical resistance development; • High support adhesion; • Extremely fine binders and aggregates that allow high penetration crack and porous injections; • Well-distributed structural consolidation and rebalancing across the entire masonry body; • Compatibility with antique plasters and traditional materials; • No expansive crystallization reactions or rejection by standard antique masonry materials; • Absolutely no bleeding (mix water separation)." "Mikrosana is used for consolidating and re-adhesive injections of antique and frescoed plasters and as a grout for consolidation and rehabilitation injections of brick, stone and mixed structures. Particularly recommended for antique wall structures with issues of compatibility between wall structure components and standard cement-based or epoxy-based reinforcement injections. When applying consolidating injections in sizeable antique masonry volumes, it is recommended to avoid: • The hardening of some injected areas faster than others (e.g. use of rapid hardening cement) • Water vapour barriers that interfere with the normal breathability of the wall structure (e.g. use of epoxy resin injections); • Stressing the wall structure with excessive heat build-up during the hardening of binding mixtures (e.g. use of extra-fine Portland cement). • Chemical incompatibility with materials in the wall structure (e.g. potential formation of sulfoaluminates, such as ettringite and thaumasite, from the reaction between sulphates in the wall structure and Portland cement)." "Before consolidating injections, joint grouting and masonry cracks must be sealed to prevent the injected material from leaking out. This can be done in the following ways: • By providing, if plastering, a Untersana rendering coat or plaster made on site using the natural hydraulic lime CALCESANA; • By performing, if the masonry is to left exposed, perfect pointing of joints and discontinuities (e.g. cracks, dents, gaps) with one of the following mortars: Sanazieg, Sanalink or Unisan (to be chosen depending on the structural needs and characteristics of the antique mortars in the wall structure). After sealing the discontinuities, make a pattern of holes, with a slightly downward incline, in correspondence with the mortar joints. Usually 4-6 holes are made per square metre with approximately 50cm separation and 20mm diameter. However, the exact arrangement and diameter of holes, angle of inclination, depth of penetration and any reinforcement of holes is to be decided by the designer and works manager, according to decisions based on structure type, degradation and intended result. After blowing out disintegrated mortar and dust, wet the holes with water. Then insert plastic tubes (diameter 10 to 30 mm as needed) to convey the injection mixture well inside the holes. The tubes must be fixed to the masonry with one of the following mortars: Sanazieg, Sanalink or Unisan." "Mixing: Mikrosana mixing must be carried out with a high efficiency mechanical stirrer (e.g. twin-helix mixer with speed variator), with correct minimum/maximum water ratios (from 20% to 23% based on the weight of the premix), for at least three minutes. Mikrosana acquires exceptional fluidity only after effective mixing. Once the desired consistency has been obtained, it is recommended to pass the mix through a 2 mm mesh sieve (or similar) to remove any lumps before injecting. Injecting: Injecting can be performed using gravity or mechanical means, from the lower holes first up to the higher ones, and with a pressure limited to sub 2 atm. If using mechanical means, pumping must be adjustable to low pressures. The mixture has a long useful life (> 1 hour), but it is recommended to keep it moving during work pauses and to stop using it after more than 3 hours, since, though not visible to the eye naked, it can begin to lose its exceptional fluidity and ability to penetrate into micro-cavities and micro-cracks." Approximately 1400 kg of Mikrosana for each cubic metre of volume to be filled. Packaging: 25 kg bag UM: €/kg

L-Ornithin/L-Ornithine: Aminosäure für Entgiftung, Schlaf und Leistungsfähigkeit. Beliebt in Nahrungsergänzungsmitteln.

ColonBact ist ein Nahrungsergänzungsmittel mit den Vitaminen B6, B12, und Biotin, Milchsäurebakterien, Kombucha-Extrakt, Rote Bete Pulver, Citruspektin und Vitaminen. - Biotin trägt bei zur Erhaltung normaler Schleimhäute, - die Vitamine B6 und B12 tragen zu einer normalen Funktion des Immunsystems bei. Bei größere Mengenabgabe Preis auf Anfrage!

Comparsaria

Soucieux d’optimiser la qualité de ses produits, CORNIC-NOVAMER a opté pour l’intégration des opérations de contrôle qualité, conditionnement et stockage. Cette orientation s’est traduite par : Un labo interne : Effectif 1 personne (9400 contrôles effectués en 2020) Un service qualité : Effectif 3 personnes Un atelier de production de 800 M² équipé de matériels de dernière génération, nous donnant une capacité annuelle de 8 millions d’UVC. Un entrepôt frigorifique d’une capacité de 1800 palettes. CORNIC-NOVAMER est certifiée IFS Food et IFS Broker High level, mais aussi ASC, MSC et BIO.

Hochdruck-Heißdampfschlauch EPDM Hochdruck-Heißdampfschlauch gute Dampf- und Chemikalienbeständigkeit. Temperaturbereich: -40°C bis +210°C bei Sattdampf, Heisswasser max. +90°C bei max. 10 bar

De nada sirve ser el mejor si nadie lo sabe, si nadie te conoce. En deOtraForma te ayudamos a encontrar el lenguaje y el medio más adecuado para hacerlo.

Osmosana Osmotic brushable hydraulic lime-based compound, for the construction of vertical barriers, waterproofing, in porous structure masonry (brick, natural stone, etc.) in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Osmosana is based on lime and hydraulic binders, botticino, kaolin, silica aggregates, tartaric acid, different silicates and carbonates. It has no traces of resins, solvents and radioemissive aggregates. The hydraulic reaction of Osmosana produced by the natural chemical combination, of water lime and kaolin (metakaolin or industrial cocciopesto (lime mortar with crushed pottery)), also called "superpozzolanic" reactivity, is comparable to the hydration reaction of cement materials, but in ecological building key. Waterproofing treatments of brick or mixed external walls, provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up), before backfilling. Anti-capillary rising damp treatments in the construction of subbase screeds. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmosana and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. After mixing is completed wait a few minutes before applying. Apply on site with a brush, spatula or roller, depending on the desired result. The mixing water indicatively necessary is 24-36% by weight (6-7 litres/bag for applications with the spatula, 8-9 litres/bag for applications by brush or roller). Approximately 1.4 kg/m² of Osmosana for each millimetre of thickness to be made. Packaging: 25 kg bag Unit of Measure: €/kg

L-Isoleucin/L-Isoleucine: Schlüsselaminosäure für Muskelwachstum, Energie und Reparatur. Beliebt in Sporternährung und Fitnessprodukten. L-Isoleucin/L-Isoleucine, eine verzweigtkettige Aminosäure (BCAA), spielt eine entscheidende Rolle im Muskelstoffwechsel und -wachstum. Sie fördert die Energieproduktion während intensiver körperlicher Aktivität und unterstützt die Muskelreparatur. L-Isoleucin/L-Isoleucine wird oft von Sportlern und Fitnessbegeisterten eingenommen, um die Ausdauer zu steigern und Muskelabbau zu verhindern. Es hilft auch bei der Regulierung des Blutzuckerspiegels und der Förderung einer stabilen Stickoxidproduktion. Diese Aminosäure ist in verschiedenen Formen erhältlich, darunter Pulver und Kapseln, und wird von Menschen genutzt, die ihre sportliche Leistung steigern oder ihre Muskelgesundheit verbessern möchten. L-Isoleucin/L-Isoleucine bietet eine breite Palette von potenziellen Vorteilen für Fitness und Wohlbefinden.