Produse pentru conector din (6)

D-SUB Combination connectors offer the possibility to equip a proven design with new functionality. This is done by using different contact types without having to change the shape, size and installation dimensions of the connector itself. By using high-current contacts, the power supply of the device can be realized without an additional interface for the power supply. High-voltage contacts allow operating voltages of up to 2.8 kV. Fast signal transmission over shielded coaxial lines is achieved with the use of special coaxial contacts. A choice can be made between the Combination D-SUB, Combination D-SUB High Density and Combination D-SUB Dual Port series. In all variants, different combinations with signal, high current, high voltage or coaxial contacts are possible. The combination of different contact types offers interesting possibilities to save space and costs in the interface area. The connectors are always supplied with signal contacts, except for the crimp version. Shell:Shell: Steel tin plated, brass tin plated or stainless steel available on request Termination:Solder pin straight/angled, press-fit, solder cup, crimp Current rating Standard:up to 7,5 A (Signal) 40 A (Power) Current rating High Density:up to 3 A (Signal) 40 A (Power) Type:D-SUB

Our 3E inlay connector can be directly fastened to existing fittings with DIN 8063 male threads and is immediately ready for use with both flexible tubes and pipes. The inlay component of the 3E connector is manufactured as one piece with the connector integrated. This saves not only time and work, it helps to ensure that the connector is tight and thus safe to use. knurled nut:loose

The press-fit connection provides an enduring mechanical and electrical connection between the printed circuit board and plug connectors. The Compliant Pin has many applications and our customers use them in a wide variety of products, including sensor and radar casings, electronic controllers, plug connectors, printed circuit board connectors and more. Advantages: — no complex soldering process — high mechanical stability — repairable — gas-tight connection at the point of contact

Material: Kupfer/Kunststoff, Oberfläche: verzinnt

Die L-Codierung ist eine Lösung zur Übertragung von hohen Strömen auf kleinem Bauraum. Sie resultiert aus der neuen Norm IEC 61076-2-111 und kann eine Stromstärke von 16 A bei einer Nennspannung von 6o V mit vier Leistungskontakten und einem Schutzkontakt umsetzen. Polzahl:4+FE, 4-pol Bauform:axial, gewinkelt Material Leitung:TPU, UL, Strombelastbarkeit:16 A Ausführung:Stecker, Kupplung Baugröße:M12x1 Steckverbindertyp:Rundsteckverbinder Bemessungsspannung:60 V

Notre raccord 3E peut être directement monté sur les robinetteries à filetage selon DIN 8063 et est immédiatement opérationnel après avoir été connecté aux tuyaux souples ou tubes. L’insert du raccord 3E est fabriqué avec le raccord intégré en une seule pièce. Cela permet non seulement de gagner du temps et d’accélérer le travail, mais procure également toute l’étanchéité requise et donc une sécurité accrue. écrou-chapeau:amovible