Produse pentru căldură pvc (11)

Avantages : Écologique : Réduction des déchets plastiques et préservation des ressources naturelles. Économique : Réduction des coûts de production tout en maintenant des standards de qualité élevés. Performant : Propriétés mécaniques et thermiques stables et fiables. Instructions de traitement : Température d'extrusion : 160°C - 180°C Température de moulage par injection : 170°C - 190°C Température de séchage : Non nécessaire, faible absorption d'humidité Pour plus d'informations ou pour des besoins spécifiques, veuillez contacter notre équipe commerciale ou consulter notre site web. Nous sommes à votre disposition pour vous fournir des échantillons et des données techniques supplémentaires.

Tubi in PVC rigido di colore azzurro filettati maschio e femmina per pozzi artesiani, per acqua potabile. Prima azienda in Italia a produrre il sistema di filettatura nei tubi, oggi PLAFOND PLAST si e specializzata nella produzione di tubi filettati di diverso diametro. La gamma comprende misure che iniziano da 4” ed arrivano fino ad un diametro massimo di 630 mm. L’alta qualita delle materie prima impiegate e la tecnologia degli impianti di produzione, garantiscono I’utilizzazione di tubi e filtri anche per pozzi di notevoli dimensioni e profondita. Durata le proprieta fisicochimiche del PVC impiegato nella produzione del tubo PLAFOND e I’alta qualita del tubo garantiscono una lunga durata di funzionamento del pozzo. Dielettriche il tubo PLAFOND, realizzato con materiali sintetici, non e attaccato dalle correnti vaganti del sottosuolo. Impiego:POZZI ARTESIANI

Notre gamme de produits comprend des flexibles spiralés, des tuyaux en PA/PUR/PE, des tuyaux en PVC avec ou sans tissé, des tuyaux en PVC souple, des tuyaux en PUR renforcés en tissé et des tuyaux en PTFE. En outre, nous proposons des tuyaux flexibles antistatiques, des tuyaux en PU protégés contre l'érosion par étincelles, des tuyaux pour air comprimé, des tuyaux autogènes, des tuyaux d'aspiration et de pression et des tuyaux spécialement conçus pour être utilisés avec de l'eau. La gamme est complétée par des dispositifs de protection contre la rupture des tuyaux flexibles, des enrouleurs pour tuyaux flexibles et câbles, des barres de serrage pour tuyaux flexibles, des coupe-tubes et des porte-tuyaux. Pour chaque application, nous disposons du matériau et de la taille de tuyau adaptés.

Round plastic ventilation pipes are joined by welding (or PVC gluing up to ø250). Manufactured in accordance with DIN 8062 standards for ventilation pipes. PVC pipes of larger diameter than 500mm are made of sheets. Pipes made of PP, PPs, PE and PPELs are extruded. Other wall thicknesses are available on request.

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

bietet eine ideale thermische Abschirmung bei Kreuzungen und Parallelführungen zwischen PEHD-Gasleitungen und elektrischen Kabeln. Die ineinander steckbare Halbschale ist leicht zu verlegen und ist mit einer hohen thermischen Belastbarkeit ausgestattet. THERMODUORIT NOVO CLIC ist überall einsetzbar wo Beeinflussungen durch Unterschreitung von Mindestabständen zu erwarten sind, z.B. durch Kabelerdschluß mit den zum Teil gravierenden Folgeschäden. Zertifizierung Prüfungen bei unterschiedlichen Instituten unterschtreichen die hohe thermische Belastbarkeit sowie die sehr guten Isolierwerte. Im Gegensatz zu mineralischen Stoffen, wie z.B. Betonplatten, die die Abstrahlwärme unmittelbar und ohne wesentliche Minimierung an das PEHD-Gasrohr weiterleiten. Mindestabstände In den DVGW-Arbeitsblättern G 459 I und II, G 463 sowie G 472 sind die Mindestabstände jeweils vorgegeben, z.B. bei Parallelführungen 40 cm, bei Kreuzungen 20 cm.

VOUS SOUHAITEZ RECEVOIR UN ÉCHANTILLON GRATUIT AVANT DE RÉALISER VOTRE ACHAT ? CELA EST POSSIBLE ! FAITES VOTRE DEMANDE D'ÉCHANTILLONS GRATUITS DE SOL PVC EN SUIVANT NOS INSTRUCTIONS CI-DESSOUS. Pour tout envoi d’échantillon, merci d’indiquer dans les commentaires le type de produit que vous souhaitez recevoir, en précisant la couleur et la surface. 1 à 2 modèles par envoi. Les frais de port de 9,00 EUROS TTC seront remboursés lors de votre prochaine commande. Ajoutez au panier Renseignez toutes les informations utiles à la livraison Effectuez le paiement (9 € TTC = Frais de port uniquement) Précisez l'échantillon voulu dans la zone "Commentaire"

PER FOGNATURE E SCARICHI INTERRATI NON IN PRESSSIONE

PER FOGNATURE E SCARICHI INTERRATI NON IN PRESSSIONE

Round plastic ventilation pipes are joined by welding (or PVC gluing up to ø250). Manufactured in accordance with DIN 8062 standards for ventilation pipes. PVC pipes of larger diameter than 500mm are made of sheets. Pipes made of PP, PPs, PE and PPELs are extruded. Other wall thicknesses are available on request.

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l