Produse pentru banda de fixare omnifix pentru măsurători (7)

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Fissatore contenente sostanze toniche, ideale per restituire ai capelli sfibrati la loro naturale bellezza e lucentezza. Forma sul capello un film trasparente ed elastico che permette di ottenere una piega ottimale, stabile e duratura. New Fix Form dona inoltre sostegno, morbidezza e luminosità all’acconciatura. NEW FIX FORM FIXATIVE MODELING LOTION Fixator containing tonic substances, ideal to give back to damaged hair their natural beauty and shine. It forms on the hair a transparent and elastic film that allows to get an optimal, stable and durable fold. New Fix Form also gives support, softness and brightness to the hairstyle.

ECOFIX PLUS the best adhesive spray for printing boards ECOFIX PLUS is an high tack adhesive specially indicated for the textile silk-screen printing industry. It is suitable to keep the fabrics steady to their support while being printed. CHEMICAL BASE BASE: Synthetic rubbers and solid resins SOLVENTS: hydrocarbure group, benzen and omologous are absent PROPELLENT: Denaturate odourless hydrocarbure COLOUR: Yellow clear VISCOSITY: Middle IT DOES NOT CONTAINS CFC MAIN CHARACTERISTICS It does not transfer on the fabric or cloths printed. It does not dirty the fabrics. It is suitable for cotton, silk, wool, synthetic fabrics, cotton, mixed. It resists to many applications. It has a good resistance to heat. It is also suitable in embroidery industry to keep the cloth steady during embroidery. In the cut rooms it gets the adhesion of the model to the cloth during the cut. DIRECTIONS FOR USE Shake well the can before use. Spray the product from a distance of 25-30 cm. Remove it with wash solvent perchloroethylene.

I kit di predisposizione self service impianto sono composti di tutto il materiale necessario per l'installazione di più punti presa. Quello che potrebbe utilizzare il vostro installatore di fiducia, per farla breve, direttamente a voi, con la garanzia di avere per le mani tutto il necessario senza dover impazzire a scegliere le singole componenti. Dalla contro-presa al mastice tutto a vostra disposizione. I kit sono qui disponibili in self service, in versione standard da 2 o 3 punti presa e acquistando le combinazioni di più kit, potete installare l'impianto nei vostri ambienti di qualsiasi metratura. Normalmente la posa avviene sotto-traccia, ma c'è chi ha sfruttato controsoffitti di cantine per riuscire ad avere l'impianto in casa con pochissimi fori. Anche con impianto totalmente a scomparsa Hidden Flex

Premixed adhesive based on cement class C2 TE S1 for the indoor and outdoor installation of floor and wall coverings, with high workability, extended open time and increased adhesion and good capacity to absorb the substrate’s deformation, zero vertical slip. Specific for floor and wall coverings also non-absorbent, natural stones, overlapping non-absorbent materials, large formats on large surfaces screeds with insertion of underfloor heating, for application of porcelain stoneware at low thickness.

Massetto autolivellante premiscelato, a base di leganti idraulici, fibro-armato, con speciali aggregati polimerici estrusi, a ritiro compensato ed essiccazione controllata, ideale per la realizzazione a mano o a macchina, anche con intonacatrice, di massetti di sottofondo autolivellanti e impastando con acqua alla giusta consistenza, anche di massetti delle pendenze, da applicarsi direttamente su qualsiasi superficie interna ed esterna purché stabile e non soggetta a risalita capillare, adatto a ricevere la successiva applicazione di qualsiasi pavimentazione come ceramiche, cotto, pietre naturali, parquets, moquettes, gomma, ecc.; adatto alla realizzazione di massetti con inserimento di riscaldamento a pavimento e massetti galleggianti su materassino resiliente per l’isolamento acustico dei rumori da calpestio.

Premixed, high elasticity, anti-carbonate, thixotropic, water-repellent, fibro-reinforced, shrinkage compensated to EN 1504-2 and EN 998-1 based on special hydraulic binders, suitable for universal use on any compatible substrate. For the external and internal smoothing of concrete surfaces, of rustic, plastic and / or mineral coatings, of traditional or premixed plasters based on lime and cement, both new and old, even if painted, provided they are in excellent condition, of plasters that present shrinkage lesions, concrete block walls, autoclaved cellular concrete, coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. To uniform plastered surfaces with different mortars. As a bonding base for coatings in polystyrene panels, polystyrene (also embossed), polyurethane, cork, cement wood. Used as a shave on coatings, it can be used as a decoration for MEHLVIT ELS / PLUS or AGROPOLI ELS / PLUS elastomeric water-based paint.