Produse pentru autovehiculelor (533)

6000 Kg Capacity, 2 Axle, 3 Side Tipping Trailer. AOT 503 Y is 3-sided tipping and is the most useful trailer in its class.In low-height warehouses, you can unload your load by lifting to the right or left. Thus, you save time and labor. Trailer axles are closed hub system and do not require lubrication for many years. The trailer is connected to the tractor from behind and pulled with the appropriate speed limit.

Chrome Double Disc Double distributor hydrolic system Openable screen 2 functional tent with mechanism that can be opened 0/180° Electric and phosphorus reflector Steel font railing bariers Shaft Brake and movable articulated wheel 18-24 disc Rear plastic tow bar Easy to remove and assemble additional attachment Corner fitting zipka bolt

It is specially produced for high stacking of square type bales between 250 and 500 kg. Together with the front loader, the skewer tip can stack up to 560 cm high.

John Deere Tractor Front Mudguard - ACT - Alchemist

Fiat Ducato (06-) Peugeot Boxer (06-) Citroen Jumper (06-) - Rear 4253.60-4254.69-77364016 Ferodo Number : FVR1927 TRW Number : GDB1682

X type mounted tandem disc harrow is used in farmland and orchard farming for preparing seed beds and seedling beds. It mixes the post-harvest stems and residues of the plants left on farmlands into the soil by crushing them. It crushes clods formed on the farmland after using machines such as plough, chisel and cultivator and breaks up the soil. Due to its three point linkage system which can be slided, it can be easily used in areas with trees.

The KM-100 and KM-200 baler is the result of rigorous work and technical research developed by competent engineers from KOM SILAJ. Designed mainly for the silage baler it also allows to treat other materials like; beet pulp, corn silage and all other fodder crops to facilitate the work of farmers.

With this type of attachment called bigbag, l oading and unloading of large sacks can be done easily.

It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester against the harmful effects of pesticides. The turbo fan is produced from Chrome (Cr)-Nickel (Ni) or galvanized sheet metal against corrosion. Angle-adjustable domestic propeller or high air flow Italian propeller is used. The water filter can be cleaned easily. It has a hydraulic mixing system. Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate. It can be easily connected to the tractor with a three-point suspension system. The turbo atomizer nozzle can rotate around its own axis to adjust the spray distance.There is a separator system in the propeller. There is an embossed and transparent level indicator on the tank.

It is used for loading and unloading cotton bales.

The position of the hydraulic lift can be changed by pumping the lever for an arc of approximately 45°. By releasing the applied force from the lever it returns by itself to its.

TGS-Gasfederverbinder bestehen aus Stahl, Edelstahl, Aluminium und Kunststoff, die mit vielen Oberflächenbehandlungsoptionen erhältlich sind. Zusätzlich zu unserem Standardsortiment bieten wir auch kundenspezifische Gasfederendstücke an.

Casting rollers have an important place in seedbed preparation. They compress the top layer of the soil at approximate planting depth by keeping the moisture, as well as allowing the underlying moisture, which cannot used by the plants, to rise up. By this way, the seeds make better contact with the soil and germinate easily. Breaking and breaking the clods on the soil surface and smoothing the surface before planting ensures that the sowing machine works easily without clogging.

Together with the tractor front loader, it provides convenience in loading beets to a height of 450 cm.

Acrobat wheel rakes have respective raking widths from 2.50m. to 3.50m. They connect to tractor with 3 point hitch system. Also, springs system provides maximum performance in any condition. The rakes can be adjusted easily and quickly. the lowest cost rake type because there is no power take-off. (PTO) Strong and stable design Optimum ground adaptation

TGS-Gasfederhalterungen bestehen aus Automatenstahl und Edelstahl, die mit vielen Oberflächenbehandlungsoptionen erhältlich sind. Zusätzlich zu unserem Standardsortiment bieten wir auch kundenspezifische Gasfederhalter an.

Ezoperatör operatörler için merkezi yönetim sistemi ve mobil uygulama yazılım desteği sağlar. *Müşteri yönetimi *Şarj istasyonu yönetimi *Elektrikli araç sürücüleri için mobil uygulama *Akıllı ve uzaktan kontrol *Ödeme ve faturalama *Kullanıcı ve yetkilendirme yönetimi *3.Parti çözüm entegrasyonu *Şarj İstasyonu çevrimiçi bakım *Kullanıcı dostu arayüzü *Tarife yönetimi *Tüketim ve kullanım raporları *Dolaşım entegrasyonları *OCPP Desteği

TGS gas spring connectors are made from steel, stainless steel, aluminium and plastic material which are available with many surface treatment options. Additional to our standard product range we offer custom design gas spring end fittings as well.

3 different models, from 2.45 to 1.65m cutting widths, 3-point hitch mounting ADM series disc mowers, handles tough conditions while delivering clean cutting performance, maneuverability, durability and overall value. Automated spring system minimizes impact affects and helps to reduce all damages. The modular design of the discs allows you to replace them individually. When in transport, the mowers are folded to a vertical position well behind the tractor for safe transport. Enhanced frame Adjustable swath width Special designed cutterbar Spring system supports across the whole working width pressure in the field Adjustable transport position

It is a funneled turbo atomizer. It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyester against the harmful effects of pesticides. The turbo fan is produced from Chrome (Cr)-Nickel (Ni) or galvanized sheet metal against corrosion.

The 3 rows independent maize chopper 2200 is specially designed for medium size enterprises, it capable of chopping 3 rows at the same time. Machine can be operated at the front side or rear side of the tractor. AMS-2200 has 12 specially designed and hardened knives placed on the flywheel. There are 2 feeding drums and 4 crushing drums in the machine that lead crops to flywheel. You can control the AMS-2200 using with just one finger, isn’t it perfect? We produce the hundred percent of our machines with our wide range of machine parkour. From its blades to the transmissions, all the parts are manufactured in our factory. As a matter of fact, the ability of our machine to operate with small horsepower tractors is reflected in the fuel. it operates with minimum fuel consumption and it is an another plus to our customers.

Alchemist single rotor rakes offer working widths of 3.30m. With the option of pivoting, fixed three-point linkage mounting to suit all your needs. The rakes have mechanical height adjustment via a crank, with the possibility of adjusting to the individual field conditions. For transport on the road, remove the arms and stow them on the space-saving holders. Designed for use on low horsepower tractors, but it still delivers considerable working width. Proves to be a popular choice among haymakers. Maintenance-friendly %100 domestic prodcution gearbox. Easy to adjust height Stronger arms Hydraulic design allows you to set the rake to different field conditions. Compact and light design that can be operated by smaller tractors

LAND ROVER - FREE LANDER -Bakır Radyatör-Copper Radiator.