Produse pentru assxzqc cn (8)

Cnc Machined Parts

Automatic Drum Cabinet

Round drill heads

Oszilliermesser mit kleinem Vorschnitt. Wie Z41, jedoch länger. Verwendung: EOT, POT 0.63 mm. Empfohlene Materialien: Leder Wellpappe Gewebe; Textile Filz Schaumstoff Max. Schnitttiefe: 13.2 mm Messermaterial: HM Messerdicke: 0.63 mm Vorschnitt: 0.8 + 0.18 x Tm Nachschnitt: 1.20 mm Hersteller Artikel-Nr.: 5002488 Artikel-Nr:20310453 Hersteller:Zünd Hersteller-Nr:5002488

LVDS output TCXO in 6 pad, 7.0 x 5.0mm SMD package. Frequency range 12MHz to 800MHz. Stability from ±1ppm -30°~+75°C. LVDS 'F' Group characteristics. RoHS Compliant. TCXO with LVDS output, 6 pad, 7 x 5mm SMD. Stability from ±1ppm -30°~+75°C. Miniature 7 x 5 x 2.8mm ceramic SMD package Supply voltage 3.3 Volts Low cost, low jitter for general applications RoHS compliant 'F' Group characteristics. Frequency Range 38.880MHz to 432.0MHz. Product Series Code TCXO:EMF576D VCTCXO: VEMF576D Frequency Range:12.0MHz to 800.0MHz Output Waveform:LVDS Initial Calibration Tolerance:<±2.0ppm at +25°±2°C Standard Frequencies:(Partial list) 12.8, 16.0 19.44, 20.0, 25.0, 27.0, 30.0, 32.0 Frequency Stability (see table) vs. Ageing:±1.0 ppm max. first year vs. Voltage Change: ±0.3 ppm max. ±5% change Supply Voltage:+3.3 Volts Differential Output Voltage VOD:247mV min., 355mV typical; 454mV max., Output 1 - Output 2 Differential Output Error dVOD:-50mV min., 50mV max. Output Offset Voltage VOS:1.125V min., 1.200V typ., 1.375V max Offset Magnitude Error dVOS:0mV min., 3.0mV typ., 25mV max Rise and Fall Times:1.5ns typical Duty Cycle:50%±5% Start-up Time:5ms typical, 10ms max. Current Consumption:12MHz to 24MHz: <33mA max., 24MHz to 96MHz: <50mA max., 96MHz to 800MHz:<85mA max Output Load:50W from each load Drive Capability:100W between LVDS and Complementary LVDS Storage Temperature:-55° to +125°C Phase Jitter (RMS) (12kHz to 20MHz):0.4ps typ., 0.5ps max

Induction hardening machines

Ziehmesser mit flachem Schaft. Messer für leichte, weiche Materialien. Kleine Schiebekräfte, jedoch grosser Überschnitt Verwendung: UCT Einsatzhülse 40, SCT Empfohlene Materialien: Planenmaterial Polyestergewebe Hohlkammerplatte PP Papier Leichtschaumstoffplatte Max. Schnitttiefe: 7.8mm Messermaterial: HM Messerdicke: 1.5 mm Vorschnitt: 1.0 x Tm Nachschnitt: - Hersteller Artikel-Nr.: 5219049 Artikel-Nr:20310656 Hersteller:Zünd Hersteller-Nr:3910309

Tape and reel specification for all CXSM SMD crystals.