Produse pentru aplicatie (162)

Tubi di precisione in acciaio senza saldatura EN10305-1 e saldati EN10305-2 trafilati a freddo per cilindri oleodinamici e pneumatici E355 E460 E590 Tubi di precisione in acciaio senza saldatura EN10297 laminati a caldo per cilindri oleodinamici e pneumatici E355 Disponibili in lunghezze commerciali o tagliati a misura fissa Lunghezze commerciali:5-10 m HPZ senza saldatura/saldati:Atti a successiva alesatura/rullatura/levigatura HP/HPG senza saldatura/saldati:Alesati/rullati/levigati H8/H9

Pezzi lavorati su disegno del cliente. Grazie alla collaborazione con una rete di terzisti di altissimo valore tecnico in un tessuto industriale locale di lunga tradizione, Sidergamma offre l`opportunità di fornire materiale lavorato secondo disegno del cliente.

Tubi di precisione per cilindri oleodinamici Trafilati a freddo senza saldatura EN10305-1 (E355+SR) Trafilati a freddo saldati EN10305-2 (E355+SR E355+C) Laminati a caldo EN10297 (E355+AR E355+K2) Alesati e rullati, barenati, levigati ISO H8/H9 Disponibili in lunghezza commerciale o tagliati a misura fissa

Barre in acciaio sottoposte a 3 diversi passaggi: Sgrossatura Rettifica di semi-finitura Rettifica di finitura Che garantiscono alta precisione dimensionale e tolleranze minime per applicazioni industriali: Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Gradi disponibili AISI 304/316/431 Fino a 2000 ore di resistenza alla corrosione NSS ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm Acciai disponibili:AISI 304/316/431

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Syntech Pavicar Two-component coating based on epoxy and polyurethane resins; for the coating, waterproofing and elastic protection of roofs, terraces, pavements, stairs, car parks and surfaces that are cracked or subject to micro-cracks and crazing. High wear resistance Applicable on tarred surfaces and bituminous sheaths Walkable product suitable for covering and waterproofing flat roofs Ease and speed of application with quick intervention times Soft and velvety to the touch Elastic product resistant to dynamic stress Available in two colors. Waterproof coating of concrete, ceramic, porcelain stoneware, wood, sheet metal supports, tarred supports and bituminous sheaths, suitably primed. Creation of elastic and waterproof protections for multi-level parking areas, both internal and external. Ideal for waterproofing cycles of balconies, roofs and terraces as it does not require preliminary demolition work or replacement of coverings. Its application allows the creation of a continuous, elastic and waterproof layer resistant to wear and trampling. Approximately 2.0 kg of Syntech Pavicar for each square meter of surface to be covered, in two coats. Can 8.3 kg [A] - Can 16.7 kg [A] - Can 4.17 kg [A] - Can 1.7 kg [B] - Can 3.3 kg [B] - Can 0.83 kg [B] - Kit: 1 Can 4.17 kg [A] + 1 Can 0.83 kg [B] - Kit: 1 Can 8.3 kg [A] + 1 Can 1.7 kg [B] - Kit: 1 Can 16.7 kg [A] + 1 Can 3.3 kg [B]

Sanastof Bianco Premixed mineral composition based on natural hydraulic lime NHL 3.5, microsilic with pozzolanic activity, selected aggregates, high tenacity microfibers, light heat-insulating aggregates with low modulus of elasticity. It is used for smoothing and smoothing, both indoors and outdoors. It is perfectly compatible with multiple substrates: lime-based plasters, lime-cement, cement mortars, concretes, porous stone, bricks. Its characteristics make it particularly suitable for green building works and for the restoration of period and monumental buildings. The maximum grain size of the aggregate is 0.9 mm. Sanastof Bianco is a product based on natural hydraulic lime NHL 3.5, kaolin, marble dust, selected siliceous aggregates and light aggregates with a low modulus of elasticity, dimensionally stable. It is a natural product with high intrinsic breathability, without any trace of resins, solvents, diluents and radio-emissive aggregates. The product contains high tenacity microfibers which give great volumetric stability. The special rounded hollow aggregates, dimensionally stable, bring special qualities of thermal insulation, filtering of potentially harmful soluble salts and reduction of the elastic modulus to the shaving. The granulometric curve, the fineness of the binders and some rheological additives of natural origin, make the product particularly smooth during the drafting phase, even when laid on supports with rough or difficult surfaces. The calibrated physical-mechanical characteristics guarantee perfect compatibility on different types of substrates, especially on traditional plasters and mortars. The microsilic content with pozzolanic activity makes smoothing and smoothing performed with Sanastof Bianco highly durable, even in aggressive exposure environments. Quick and easy application on various substrates, such as: transpiring smoothing of wall casings; smoothing on modular wood fiber or calcium silicate coats; regularization of plastered surfaces; leveling of concrete surfaces; regularization and smoothing of repairs carried out with cement mortars; application to mainly thin thicknesses (from 1 to 4 mm) with simultaneous leveling of recesses, imperfections etc. In particularly severe operating conditions it is advisable to interpose, between the first and second coat, the alkali-resistant glass fiber mesh Armaglass 160 (the mesh must be partially drowned on the first still fresh coat of Sanastof Bianco). The breathability, combined with the other physico-chemical characteristics of the product, make the smoothing made with Sanastof an ideal support to accommodate any kind of paint and in particular mineral paints based on potassium silicate or slaked lime. Sanastof is the transpiring smoothing, with a low modulus of elasticity, recommended in all our dehumidifying systems made with the products: Sanatigh, Caleosana, Sanawarme, Unisan, Intosana. The application surfaces must be clean, free from dirt, crumbly and incoherent parts, dust, etc. Smooth substrates must be roughened (roughness> = 1mm). In the event that the support, after cleaning and roughening, is still dusty and crumbly, remove the totally incoherent parts dry with a spatula-brush, or assisting the removal operation with hydro-washing, then consolidate the support by impregnation with aqueous emulsion Protech Fix AC applied in two abundant coats, the second coat immediately before applying Sanastof Bianco with the "fresh on fresh" technique (the consumption of Protech Fix AC for this priming operation is between 120 and 250 gr / m2). Adequately wet the substrate with water before application, anticipating and repeating this operation several times in the case of very porous and absorbent substrates or in hot and arid climates. Approximately 1,3 kg/m² of Sanastof Bianco for each millimetre of thickness to be implemented (on average 3 - 3,5 kg per square metre). Bag 25 kg

Sanareg Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered. Sanareg is an alkylsilane water emulsion, non-hazardous, non-toxic and VOC-free. The application of Sanareg does not alter the original wall breathability. Particularly indicated in combination with the cycle of natural dehumidifying plasters Untersana, Sanatigh and Sanastof. This also applies to Untersana, Caleosana and Sanastof. Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered. Remove the soilings and saline manifestations by vigorous brushing; then eliminate any dust residue. Surfaces should be as dry as possible at the time of application. Apply Sanareg by spraying or with a long-bristled brush, proceeding from the bottom upwards. Remove any surface excess. When used as a preliminary treatment before a plastering cycle, apply the first coat of rendering immediately after applying Sanareg. Sanareg is water-based, which is why its effectiveness is not compromised even if the substrate is not perfectly dry at the time of application. From 0.10 to 0.20 kg of Sanareg for each square metre of surface to be treated, based on the porosity of the support. Plastic can 5 kg - Plastic can 25 kg

Unisan A composite mortar that is fibre-reinforced, consolidating, dehumidifying, grey in colour and utilised for the structural restoration of crumbling old or monumental masonry. It contains no substances that are potentially harmful to masonry and is composed of NHL 3.5 natural hydraulic lime and hydraulic binders free from soluble salts, along with silicas with pozzolanic activity, selected siliceous-calcareous aggregates, specific shrinkage-reducing agents and resistant alkaline READYMESH fibres that confer high flex-traction whilst increasing the performance of the mortar’s fracture energy. In conjunction with ARMAGLASS STRUCTURA fibreglass mesh, it is ideal for the structural restoration of old walls or crumbling constructions. Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements. The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface". In the case of structural reinforcing slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with PROFIX, Grout Micro-J, Repar Tix G2 or Syntech IC 55. Pour about 2/3 of the mixing water into the mixer, add Unisan and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4). Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces. Approximately 15 kg/m² of Unisan for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Syntech Flexipur Syntech Flexipur is a two-component aliphatic elastic polyurethane resin in the solvent phase, with excellent characteristics of chemical resistance and flexibility, ideal for the protective finish of both new and restored reinforced concrete structures. Syntech Flexipur is applied by roller or spray (airless) creating a film-forming coating with high protective capacity and resistance to cracking (crack bridging ability). Syntech Flexipur is ideal for creating the surface protection of both new and existing reinforced concrete structures; The final protective treatment of coatings for commercial activities, offices, hospitals and public environments in general; It can be used for UV protection of solvent-free polymeric elastic sheaths. Mix the two components in their respective packaging. Then pour component B into the container of component A. Mix everything for 3-4 minutes using a low-speed mechanical stirrer until a homogeneous and lump-free mixture is obtained. Mix the dough again for a few minutes to mix the mixture. Apply the product within 60 minutes. Syntech Flexipur can be applied by roller or spray (airless). With manual roller application it is advisable to foresee 2 successive coats, spaced out by a minimum time of 5 hours (20 ° C and 65% R.H.). In the case of spray application (airless) it is possible to apply the recommended thickness of 200-300 dry microns in a single coat. The product must be applied at temperatures between +10 and + 35 ° C; optimal density and workability are obtained at a temperature of + 20 ° C. Approximately 80-120 g / m2 of Syntech Flexipur for each coat (apply two coats). Can 6.7 kg [A] - Can 3.3 kg [B] - Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B]

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from various kinds of encrustations (lime, gypsum, calcareous concretions, saltpetre). To be applied after diluting with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals, therefore pay particular attention to surfaces in marble, limestone, floors and lead polished stones, carrying out appropriate preventive assessments. Protect metal surfaces. Operations of saline removal and stabilisation, removal of deposits of lime, gypsum, saltpetre, mosses; deep cleaning of leakages and media in general. Particularly suitable as a detergent in waterproofing interventions with Protech Balcony. Dilute the product in water based on the nature and size of the incrustation and/or of salt fouling to be removed. Spread the solution with a spray or brush, or even by pouring directly on the fouling to be removed. Leave on for a few minutes. Wash the foam produced by the acid reaction with copious amounts of water . Deterg-A can be used in various dilution ratios: from pure (undiluted) up to one part of product in 10 parts of water. In preparation of the supports to be waterproofed with Protech Balcony, consider diluting the product 1:4, for a consumption of 400 g/m² of solution. In this case, the consumption of Deterg-A is about 1 litre of product to dilute per 10 sqm of tiled surface to be waterproofed. Do not apply on marble surfaces, terracotta, natural stone, polished lead floors and galvanised surfaces. It is a corrosive product, pay attention to the security fact sheet. Always wear gloves when handling. From 0.10 to 1.00 kg of Deterg-A per square metre of surface to be treated, based on the type of material and the porosity of the support. Recommended: 0.25 kg/m² of tiled surfaces. Packaging: 1 kg bottle UM: €/kg

DFP-WR is a series of semi-automatic distributors of adhesive labels on rolls, completely made of steel, easy to use, versatile for any type of label you normally use. Available in widths up to 100 mm. or 200 mm. The holder can be adapted to any core can accept rolls up to 300 mm. diameter, thus offering long autonomy.The labels are read by two sensors that self-learning by the microprocessor automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler, almost completely detached. Withdrawing the label, the next pop-up automatically. The control board also allows you to stop the rotation of the motor when coil is finished, or in case of paper breaking. It sign the anomaly with a sound signal. There is an electromechanical sensor for transparent labels and a preset counter for the regressive or progressive counting of the labels. The use of the battery version allows to work for about 4 hours without power supply. Example model:MOD. DFP-WR 100 Engine :Step by step Label width:mm. 15-100 Label lenght:mm. 15-600 External reel max diameter:mm. 300 Internal reel diameter:from 38 to mm. 110 Progress speed:from 10 to 15 mt./min.

This gluing gun for professional use enabling the application of hot melt adhesives in pellet or stick diameter 43 mm .. Suitable for bonding small and large surfaces. The fusion system in the closed tank allows to have in a few seconds a large amount of melt adhesive for a fast delivery. The temperature is regulated by a thermostat at bimetallic strip, which guarantees a particular strength and wear resistance. Thanks to the melting tank (optional) you can heat the glue prior to use by making use of the gluing faster and cheaper. The gluing is provided with standard nozzle # 3074. Other nozzles available on reservation. Air pressure:adjustable 1-6 bar Power consumption:400W Air Consumption:100 l/min Temperatureadjustable:20°- 200°C Heating time:3-5 min Tank capacity:250 ml Capacity of extrusion:250 ml/min

The label is inserted by the operator under the shaft which is located in front of the gluing cylinder which, with its continuous rotation, drag and applies a thin film of glue, handing the operator already ready to be applied. A special device allows the micrometric regulation of the glue, allowing a perfect gluing and the maximum cleanliness of the label. The EME gluing machines are made of stainless steel and brass, while the tray of glue is in ABS antacid. All parts in contact with the glue are interlocking and can be disassembled easily without any tools, making it quick and easy cleaning. USABLE GLUE: The gluing machines use a sticky compound consisting of powdered dextrin diluted in water. 400 grams of dextrin must be mixed with 600 ml of water. This is vegetable glue derived from potato starch. Example model:EME 230 N Useful width:230 mm Label power supply:manual

The reinforced pallet trucks of the Ferplast FPGS 30 series, with a capacity of 3000 Kg. Are extremely robust and suitable for heavy applications in the industrial and logistic sectors. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip Available in the following models: Pallet truck with forks mm. 800x400 Pallet truck with forks mm. 800x525 Pallet truck with forks mm. 1150x525 - the most requested Pallet truck with forks mm. 1500x525 Pallet truck with forks mm. 1800x525 Pallet truck with forks mm. 2000x525 Example model:FPGS 30/150/180/200 Load:Kg. 3000 Forks length l (mm):1500-1800-2000 Forks width b5:mm. 525 Single fork width e:mm. 150 Minimum fork height h13:mm. 85 Maximum fork height h3:mm. 115 Total length l1 (mm):1900-2200-2400 Rudder height h14:mm. 1160 Front wheels material:polyurethane Rear roller material :Nylon

The glue dosing system is a simple and reliable system that allows the application of a certain amount of glue on boxes, cartons, trays, etc. The expulsion of the glue is controlled by an electro-pneumatic valve, controlled by the operator with a pedal or button. The amount of glue to be dispensed can be easily adjusted using a timer. Thanks to the valve that discharges the excess air, it is also possible to apply just one glue point without risking leaking from the gluing machine. The gluing machines are supplied with about 3 meters of compressed air hose. The length of the tube can be changed during the order. Available models: FPTR 50.5 LCD electro-pneumatic gluing machine with adjustable temperature with thermostat from 20 to 200°C LCD display FPTR 55 LCD electro-pneumatic gluing machine with electronically adjustable temperature from 50 to 210°C LCD display FPTR 55 LCD HT electro-pneumatic gluing machine with electronically adjustable temperature from 50 to 250°C LCD display Example model:FPTR 50.5 LCD Air pressure:adjustable 1-6 bar Air consumption:100 l/min Temperature adjustable :20°-200°C Heating time:3-5 min Tank capacity:250 ml Extrusion capacity:250 ml/min

The labels are read by two sensors that, self-learning by the microprocessor, automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler almost completely detached. Withdrawing the label the next pop-up automatically. The control board also allows to stop the rotation of the motor coil is completed, or in case of breakage paper signaling the anomaly with a sound signal. Label width:mm. 15-100 Label length:mm. 15-150 Power:30 W Dimensions:mm. 242x280x183 h weigth:Kg. 4

GALVANIZED MANUAL PALLET TRUCK MOD. FPGS25-G - CAPACITY 2500 Kg. The FGS25-G hand pallet truck is built with a galvanized structure and is therefore suitable for use in the pharmaceutical or chemical industry or in humid or saline environments such as fish markets and fishmongers. The internal pump is made of brass with excellent resistance to humidity and oxidation. This model is characterized by: - Structure in galvanized steel sheet -- Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm. mounted on ball bearings. - Double nylon loading roller diameter mm. Example model:52/80-2 FPGS25-SG Load:Kg. 2500 Forks length (l):mm. 800 Forks width (b5):mm. 525 Single fork width (e):mm. 150 Total lenght (l1):mm. 1200 Max. fork height (h3):mm. 115 Min. fork height (h13):mm. 85 Rudder height (h14):mm. 1160 Front wheels material:nylon Rear rollers material:nylon

New model for professional use with use of hot melt adhesives granulated or stick diam. 43 mm. and manual advancement (there is no need compressed air). The fusion system in closed tank allows to have in a few seconds a large amount of molten adhesive to a fast dispensing. The temperature is regulated by thermostat at bimetal strip, which ensures a particular strength and wear resistance. It also has a magnetic base that allows you to place it on metal surfaces. Available models: MS 200-TER: model with temperature regulation with thermostat MS 200-LCD: model with temperature adjustment by LCD display Example model:MS 200-LCD Extrusion capacity :2500 g/h Temperature control:Electrical Operating temperature:30~200°C Temperature tolerance:± 2°C Warm-up time:5 min. Tank capacity:250 ml Used glue:Granular - Stick diam. 43 mm

D-FPWR BOTTLES - SEMI-AUTOMATIC LABELING MACHINES FOR ROUND PRODUCTS Semi-automatic applicator for rolls of self-adhesive labels with maximum width mm 200/300 on bottles and cylindrical products with a diameter of mm 20 to mm 130 Main features: - Sturdy construction in steel and aluminum - Motorization of the product rotation roller and the drawing of the labels by means of stepper motors with variable speed and electronically synchronized - Microprocessor management electronics with storage of 40 working formats - Possibility to apply a wraparound label or front/back label and also with a different size with adjustment of the distance between the two programs - Maximum label width mm 200/300, and maximum coil diameter 300 mm - Change of format extremely simple and fast Model:D-FPWR Roll diameter:300 mm Core diameter:38-110 mm Supply Voltage:230 Vac-50Hz Power consumption:200W Overall dimensions:800x500x400 (H) Weight:Kg 25

This gluing machine for professional use permits the application of granulated or stick (diameter 43 mm) hot melt adhesives. Suitable for bonding large surfaces. The fusion system in the closed tank allows a large amount of melt adhesive in few second for fast delivery. The temperature is electronically controlled by the LCD, which guarantees a specific precision and ease of use. Thanks to the melting tank (optional) you can heat the glue prior to use by making use of the gluing faster and cheaper. Available models: FPTR 55 LCD: electro-pneumatic gluing machine with adjustable temperature from 50 to 210° C FPTR 55 LCD HT: electro-pneumatic gluing machine with adjustable temperature from 50 to 250° C Power supply:230V Power consumption:600W Air pressure:da 1-6 bar Air consumption:100 l/min Heating time:3-10 min Weight of the gluing:kg 1,4 Tank capacity:300 ml Capacity of extrusion:300 ml/min Temperature indication:Display LCD

One Side Adhesive for LEATHER'S PRODUCERS The NEOPRENE ONE WAY is a plychloroprene adhesive adapt for LEATHER'S PRODUCERS and GIUNETRIA in particular in the case where you want apply the glue only in a side. Used for the construction of insoles in shoes too. It has high viscosity. High bond strength. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 30 - 60 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon one of the two parts has to be sticked, let it dries for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1 .

Leather Sole Adhesive The NEOPRENE 1 is a plychloroprene adhesive with high crystallization used for cold sticking of LEATHER SOLES, for the assembly of the GUARDOLO and for the to pair LEATHER-LEATHER and LEATHER-TUNITH. High bond strenght. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Rubber Soles Bicomponent Adhesive The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. After the mix between the glue and the activator , the glue has a life of 2 hours more or less. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

È un rivestimento murale plastico che consente di ottenere delle finiture ad effetto frattazzato. Risolve egregiamente tutti quei problemi di idrorepellenza, ancoraggio, durata e resistenza all'azione dello smog, della salsedine e degli alcali che sovente affliggono le strutture edilizie. A richiesta è disponibile anche in versione ANTIALGA. MASSA VOLUMICA: Kg. 1,790/1,000 litro RESA: Kg. 2,000/1,000 mq. circa TEMPERATURA MINIMA DI FILMAZIONE: deve essere applicato ad almeno + 5° C. Teme il gelo CONSERVAZIONE: in luogo fresco a +5°C. Teme il gelo SPESSORE DEL RIVESTIMENTO: mm 1,000 circa CONFEZIONI DA: Kg. 25,000 Kg. 9,000

Incollaggio immediato, forte e resistente. Incolla gomma, metallo, legno, ceramica, cuoio, plastica, eccetto PE, PP, PTFE. LE MIGLIORI QUALITA’ DI COLLA 21 NEL NUOVO FORMATO DA 50 GR. PER USO PROFESSIONALE.

Scopri Pk-LINE-Belt-TTR-E per Stampa e Applicazione di Etichette su Prodotti Piani. Con nastrino di trasporto motorizzato e fino a 100 ricette memorizzabili, questa macchina offre precisione e versatilità. La tecnologia SYNCRO consente di regolare la velocità di trasporto dei prodotti, garantendo un'applicazione precisa fino a 50 pz./min. L'innovazione è qui: la possibilità di utilizzare un motore di stampa da 4 o da 6 pollici offre flessibilità e adattabilità a una vasta gamma di esigenze di stampa. Scopri di più sulle sue capacità di personalizzazione e sulle potenzialità di questa soluzione avanzata per la tua produzione!

The NEOPRENE 14 SPRAYING is a plychloroprene adhesive used for processing on the division of forniture, sticking of wood - textile and expanded polyurethan. Used for bonding expandeds and quits with difficult materials. Spray on both sides. COLOURS : Black, Pink, Grey and Neutral. CHARACTERISTICS : Viscosity : 700 +/- 100 cPs Opened Time : 15 - 20 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1.