Produse pentru aplicatie (50)

Le ghiere personalizzate in ottone sono componenti versatili e resistenti, ideali per una vasta gamma di applicazioni industriali. Realizzate con ottone di alta qualità, queste ghiere offrono una resistenza eccezionale alla corrosione e una lunga durata, anche in condizioni operative difficili. La possibilità di personalizzare queste ghiere secondo le specifiche del cliente garantisce un adattamento perfetto e un funzionamento ottimale, migliorando l'efficienza e la sicurezza dei sistemi in cui vengono utilizzate. Le ghiere in ottone sono utilizzate per il fissaggio di tubi, raccordi, valvole, contatori e corpi pompa. Grazie alle loro proprietà anticorrosive e alla resistenza dell'ottone, offrono versatilità in termini di forma, tipo di serraggio e funzionalità. Questa varietà di opzioni consente di scegliere la ghiera più adatta per ogni applicazione specifica, garantendo una tenuta perfetta e una lunga durata. Le ghiere personalizzate in ottone rappresentano una soluzione affidabile per qualsiasi progetto che richieda componenti di alta qualità e prestazioni durature.

Abbiamo esperienza nella produzione di componenti in ottone senza piombo, offrendo soluzioni ecologiche e sicure per le vostre applicazioni. Utilizziamo tecnologie avanzate per garantire alta qualità e precisione, soddisfacendo le esigenze di vari settori. Affidatevi alla nostra competenza per prodotti sostenibili e performanti.

Syntech Profix A two-component paste with a polyester resin base for the rapid realisation of structural fasteners and anchors for inserts and connectors in general. This quick-setting resin (which hardens in just 6 minutes at 20° C) facilitates the use of metal inserts a mere 2.5 hours from installation. Syntech Profix is a system that is easy and quick to use that provides high performance in terms of penetration, adherence and mechanical resistance. In particular, in concrete, natural stone, full and hollow brick works etc., the resin Syntech Profix, permeates the porous systems that delimit the perforation, allows the achievement of very high admissible loads, adjustable and scalable through variations of the fastening element, the anchor depth and so on. Syntech Profix is packaged in a two-compartment cartridge, whose special tip mixes the two components directly during extrusion, activating the polymerisation reaction instantly. Fixing of connectors, bars, plates, metallic structures, fencing, shutters, gates, shelves, reinforcing rods etc., in different types of media, with particular effectiveness in the presence of concrete, natural stone, bricks, drilled (through the perfo sleeves) etc. The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The following accessories are provided for easy use of the cartridges Syntech Profix: - Gun for resins in a cartridge with rack-and-pinion piston. - Perfo sleeves (only for hollow masonry and perforated blocks) - Spout mixer for two-compartment cartridges (mixing tip) Extrude Syntech Profix in the required quantity in the fastening seat. Attach the metal insert to be anchored within a few seconds after the extrusion. Do not touch the insert for any reason until the ascertained hardening of the resin. Approximately 1.72 kg of Syntech Profix for each cubic decimetre of volume to be filled (variable according to the conditions of use). Bi-mix cartridge 400 cc - Box: 12 x (Bi-mix cartridge 400 cc).

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Sanastof Bianco Premixed mineral composition based on natural hydraulic lime NHL 3.5, microsilic with pozzolanic activity, selected aggregates, high tenacity microfibers, light heat-insulating aggregates with low modulus of elasticity. It is used for smoothing and smoothing, both indoors and outdoors. It is perfectly compatible with multiple substrates: lime-based plasters, lime-cement, cement mortars, concretes, porous stone, bricks. Its characteristics make it particularly suitable for green building works and for the restoration of period and monumental buildings. The maximum grain size of the aggregate is 0.9 mm. Sanastof Bianco is a product based on natural hydraulic lime NHL 3.5, kaolin, marble dust, selected siliceous aggregates and light aggregates with a low modulus of elasticity, dimensionally stable. It is a natural product with high intrinsic breathability, without any trace of resins, solvents, diluents and radio-emissive aggregates. The product contains high tenacity microfibers which give great volumetric stability. The special rounded hollow aggregates, dimensionally stable, bring special qualities of thermal insulation, filtering of potentially harmful soluble salts and reduction of the elastic modulus to the shaving. The granulometric curve, the fineness of the binders and some rheological additives of natural origin, make the product particularly smooth during the drafting phase, even when laid on supports with rough or difficult surfaces. The calibrated physical-mechanical characteristics guarantee perfect compatibility on different types of substrates, especially on traditional plasters and mortars. The microsilic content with pozzolanic activity makes smoothing and smoothing performed with Sanastof Bianco highly durable, even in aggressive exposure environments. Quick and easy application on various substrates, such as: transpiring smoothing of wall casings; smoothing on modular wood fiber or calcium silicate coats; regularization of plastered surfaces; leveling of concrete surfaces; regularization and smoothing of repairs carried out with cement mortars; application to mainly thin thicknesses (from 1 to 4 mm) with simultaneous leveling of recesses, imperfections etc. In particularly severe operating conditions it is advisable to interpose, between the first and second coat, the alkali-resistant glass fiber mesh Armaglass 160 (the mesh must be partially drowned on the first still fresh coat of Sanastof Bianco). The breathability, combined with the other physico-chemical characteristics of the product, make the smoothing made with Sanastof an ideal support to accommodate any kind of paint and in particular mineral paints based on potassium silicate or slaked lime. Sanastof is the transpiring smoothing, with a low modulus of elasticity, recommended in all our dehumidifying systems made with the products: Sanatigh, Caleosana, Sanawarme, Unisan, Intosana. The application surfaces must be clean, free from dirt, crumbly and incoherent parts, dust, etc. Smooth substrates must be roughened (roughness> = 1mm). In the event that the support, after cleaning and roughening, is still dusty and crumbly, remove the totally incoherent parts dry with a spatula-brush, or assisting the removal operation with hydro-washing, then consolidate the support by impregnation with aqueous emulsion Protech Fix AC applied in two abundant coats, the second coat immediately before applying Sanastof Bianco with the "fresh on fresh" technique (the consumption of Protech Fix AC for this priming operation is between 120 and 250 gr / m2). Adequately wet the substrate with water before application, anticipating and repeating this operation several times in the case of very porous and absorbent substrates or in hot and arid climates. Approximately 1,3 kg/m² of Sanastof Bianco for each millimetre of thickness to be implemented (on average 3 - 3,5 kg per square metre). Bag 25 kg

Sanareg Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered. Sanareg is an alkylsilane water emulsion, non-hazardous, non-toxic and VOC-free. The application of Sanareg does not alter the original wall breathability. Particularly indicated in combination with the cycle of natural dehumidifying plasters Untersana, Sanatigh and Sanastof. This also applies to Untersana, Caleosana and Sanastof. Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered. Remove the soilings and saline manifestations by vigorous brushing; then eliminate any dust residue. Surfaces should be as dry as possible at the time of application. Apply Sanareg by spraying or with a long-bristled brush, proceeding from the bottom upwards. Remove any surface excess. When used as a preliminary treatment before a plastering cycle, apply the first coat of rendering immediately after applying Sanareg. Sanareg is water-based, which is why its effectiveness is not compromised even if the substrate is not perfectly dry at the time of application. From 0.10 to 0.20 kg of Sanareg for each square metre of surface to be treated, based on the porosity of the support. Plastic can 5 kg - Plastic can 25 kg

Unisan A composite mortar that is fibre-reinforced, consolidating, dehumidifying, grey in colour and utilised for the structural restoration of crumbling old or monumental masonry. It contains no substances that are potentially harmful to masonry and is composed of NHL 3.5 natural hydraulic lime and hydraulic binders free from soluble salts, along with silicas with pozzolanic activity, selected siliceous-calcareous aggregates, specific shrinkage-reducing agents and resistant alkaline READYMESH fibres that confer high flex-traction whilst increasing the performance of the mortar’s fracture energy. In conjunction with ARMAGLASS STRUCTURA fibreglass mesh, it is ideal for the structural restoration of old walls or crumbling constructions. Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements. The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface". In the case of structural reinforcing slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with PROFIX, Grout Micro-J, Repar Tix G2 or Syntech IC 55. Pour about 2/3 of the mixing water into the mixer, add Unisan and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4). Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces. Approximately 15 kg/m² of Unisan for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from various kinds of encrustations (lime, gypsum, calcareous concretions, saltpetre). To be applied after diluting with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals, therefore pay particular attention to surfaces in marble, limestone, floors and lead polished stones, carrying out appropriate preventive assessments. Protect metal surfaces. Operations of saline removal and stabilisation, removal of deposits of lime, gypsum, saltpetre, mosses; deep cleaning of leakages and media in general. Particularly suitable as a detergent in waterproofing interventions with Protech Balcony. Dilute the product in water based on the nature and size of the incrustation and/or of salt fouling to be removed. Spread the solution with a spray or brush, or even by pouring directly on the fouling to be removed. Leave on for a few minutes. Wash the foam produced by the acid reaction with copious amounts of water . Deterg-A can be used in various dilution ratios: from pure (undiluted) up to one part of product in 10 parts of water. In preparation of the supports to be waterproofed with Protech Balcony, consider diluting the product 1:4, for a consumption of 400 g/m² of solution. In this case, the consumption of Deterg-A is about 1 litre of product to dilute per 10 sqm of tiled surface to be waterproofed. Do not apply on marble surfaces, terracotta, natural stone, polished lead floors and galvanised surfaces. It is a corrosive product, pay attention to the security fact sheet. Always wear gloves when handling. From 0.10 to 1.00 kg of Deterg-A per square metre of surface to be treated, based on the type of material and the porosity of the support. Recommended: 0.25 kg/m² of tiled surfaces. Packaging: 1 kg bottle UM: €/kg

Valvola a sfera a passaggio totale, filettatura F/F, con farfalla in alluminio.

Minuteria meccanica settore Idraulica - settori di applicazione

Valvola a sfera a passaggio totale, filettatura F/F, con leva in acciaio. Limiti di temperatura:-20°C +160°C

ATTUATORI ELETTRICI - SERIE 86 MOD. VB270M - ATTUATORI ELETTRICI - SERIE 86

Pk-LINE-Easy-Seal-R-V è una macchina etichettatrice automatica veloce che utilizza motori brushless ad alta qualità. Grazie alla sua innovativa tecnologia, questa macchina offre prestazioni eccezionali, elevata velocità di produzione e una vasta gamma di funzionalità. Pk-LINE-Easy-Seal-R-V è indirizzata a cicli di lavoro industriali per l’etichettatura di prodotti rotondi: può applicare una etichetta attorno al prodotto ed una etichetta come sigillo fra tappo e corpo del vaso. Si possono applicare etichette con sigillo integrato ad alta velocità. Il pannello di controllo touch-screen a colori da 7” offre un’esperienza utente intuitiva e facile da usare. Tutte le funzionalità sono gestite in modo ottimale, consentendo all’operatore di utilizzare la macchina in modo semplice ed efficiente. La macchina dispone di una vasta gamma di accessori tra cui il marcatore inkjet per la stampa dei dati variabili.

Gli applicatori della serie IDL 5/9 permettono di incollare in modo completamente automatizzato un numero variabile di campioni su una cartella di formato ISO A4/ANSI A. La capacità produttiva della macchina è, infatti, di 1000 cartelle l'ora. La movimentazione dei campioni avviene utilizzando la tecnologia del vuoto. Per l'incollaggio vengono utilizzate colle applicate durante il movimento sulla cartella. Applicators IDL 5/9gives the possibility to fix one or more samples on a sample card at the same time. The standard card sizes are ANSI/ISO A4 or A3, of course customizations are possible. The effective production performance is 1000 pages per hour. IDL 5/9 picks up the samples using the vacuum technology. To stick the sample an hot melt glue is used to ensure a strong fixing, the melting device is a part of each IDL5/9 machine.

Scopri Pk-LINE-Belt-TTR-E per Stampa e Applicazione di Etichette su Prodotti Piani. Con nastrino di trasporto motorizzato e fino a 100 ricette memorizzabili, questa macchina offre precisione e versatilità. La tecnologia SYNCRO consente di regolare la velocità di trasporto dei prodotti, garantendo un'applicazione precisa fino a 50 pz./min. L'innovazione è qui: la possibilità di utilizzare un motore di stampa da 4 o da 6 pollici offre flessibilità e adattabilità a una vasta gamma di esigenze di stampa. Scopri di più sulle sue capacità di personalizzazione e sulle potenzialità di questa soluzione avanzata per la tua produzione!

Gli applicatori automatici IDL M4 permettono di incollare in modo completamente automatizzato un numero variabile di campioni su una cartella di dimensioni minime ISO A4/ANSI A fino a 1000mm per 500mm. La capacità minima è di 220 cartelle l'ora fino ad oltre 800 cartelle a seconda della dimensione della cartella e dal tipo di incollaggio. La movimentazione dei campioni avviene utilizzando la tecnologia del vuoto o ad aghi. Per l'incollaggio vengono utilizzate colle a caldo (Hot Melt) o a freddo (telaio serigrafico). IDL M4 sticks automatically a variable number of samples at the same time on a variable size card. The minimum dimensions is ISO A4/ANSI A the maximum is 1000mm X 500 mm. IDL M4 minimum production performance is of 220 pages per hour, up to more than 800 pages per hour according to the size of the card and on the glueing method. The handling of the samples is either made by vacuum technology or by pins.

Pk-LINE-Belt con telaio di supporto a sbalzo permette facili installazioni nelle più svariate necessità. Ampia gamma di dimensioni dei prodotti: Pk-LINE-Belt può trattare prodotti da 0,1 a 500 mm di altezza e fino a 320 mm di larghezza. Etichette verticali: La testa di etichettatura può applicare etichette in senso verticale dall’alto, per un’applicazione precisa e uniforme. Dimensioni etichette: Pk-LINE-Belt è disponibile per etichette da 20 a 100 mm con il modello Pk-X oppure da 20 a 150 mm con il modello Pk-X-150. Velocità di etichettatura: Il nastro di trasporto è regolabile in velocità da 0 a 30 mt/min. Tecnologia SYNCRO (esclusiva Packin): Grazie alla tecnologia SYNCRO si elimina la necessità di regolazioni complesse quando si cambia la velocità del nastro. Pannello di controllo intuitivo: Il pannello di comando touch-screen a colori (fino a 100 programmi) permette di controllare la macchina in modo semplice e intuitivo. Marcatori inkjet opzionali.

Applicatore automatico IDLM 4 Gli applicatori automatici IDL M4 permettono di incollare in modo completamente automatizzato un numero variabile di campioni su una cartella di dimensioni minime ISO A4/ANSI A fino a 1000mm per 500mm. La capacità minima è di 220 cartelle l'ora fino ad oltre 800 cartelle a seconda della dimensione della cartella e dal tipo di incollaggio. La movimentazione dei campioni avviene utilizzando la tecnologia del vuoto o ad aghi. Per l'incollaggio vengono utilizzate colle a caldo (Hot Melt) o a freddo (telaio serigrafico). IDL M4 sticks automatically a variable number of samples at the same time on a variable size card. The minimum dimensions is ISO A4/ANSI A the maximum is 1000mm X 500 mm. IDL M4 minimum production performance is of 220 pages per hour, up to more than 800 pages per hour according to the size of the card and on the glueing method. The handling of the samples is either made by vacuum technology or by pins.

Viar Valvole valves Type V3, F3, V63 and F63, are Stainless Steel Cryogenic Ball Valves for temperature lower than -110°C (166°F). Applications: transporting, storing and handling of Liquefied Natural Gas (Methane, LNG) - Air separation processes: transporting, storing and handling of technical gases (e.g.: Oxygen, Argon, Nitrogen)