Produse pentru aplicatie (11)

Pure Latex Water Based Adhesive is ideal for solution appliers with rolls. The PURE LATEX is a water based adhesive of natural rubber's latex used for assembly of lining, cover with leather and various process of Juntery. CHARACTERISTICS : Viscosity 200+/-50 Cps USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be stickked, wait for the evaporation of the water and then press the two parts. APPLICATION : By spray, by rull or by brush ATTENTION : With temperature near to 0°C the product freezes and can no more be used. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 20 - Kg 10 Kg 5 - Kg 1

Effegomma realizza ventose in gomma e in altri materiali, di varie tipologie a seconda dell’utilizzo finale.

Brevetto esclusivo di Gruppo Meccaniche Luciani, consigliato da Swarovski come metodo di applicazione dei Rose Pins, l'unico in gradi di applicare i cristalli in un solo colpo. Per Info: gml@gruppomeccanicheluciani.com

Montaggio e stampa adesivi personalizzati per qualsiasi superficie

The ECO-AUTOMASTIK is a NATURAL RUBBER ADHESIVE used on the general processing of JUNTERY. Adapt for who wants to apply the glue only on a part. It is called ECO because the company uses only raw materials with law environmental impact. CHARACTERISTICS : Viscosity : 5500 - 6000 cPs Colour : Amber USING INSTRUCTIONS : Apply an homogeneous coat upon one of the two parts has to be sticked, way for the evaporation of the solvents and then stick the two parts. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 13 - Kg 8 Kg 3,5 - Kg 1

One Side Adhesive for LEATHER'S PRODUCERS The NEOPRENE ONE WAY is a plychloroprene adhesive adapt for LEATHER'S PRODUCERS and GIUNETRIA in particular in the case where you want apply the glue only in a side. Used for the construction of insoles in shoes too. It has high viscosity. High bond strength. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 30 - 60 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon one of the two parts has to be sticked, let it dries for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1 .

Leather Sole Adhesive The NEOPRENE 1 is a plychloroprene adhesive with high crystallization used for cold sticking of LEATHER SOLES, for the assembly of the GUARDOLO and for the to pair LEATHER-LEATHER and LEATHER-TUNITH. High bond strenght. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Rubber Soles Bicomponent Adhesive The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. After the mix between the glue and the activator , the glue has a life of 2 hours more or less. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

The NEOPRENE 14 SPRAYING is a plychloroprene adhesive used for processing on the division of forniture, sticking of wood - textile and expanded polyurethan. Used for bonding expandeds and quits with difficult materials. Spray on both sides. COLOURS : Black, Pink, Grey and Neutral. CHARACTERISTICS : Viscosity : 700 +/- 100 cPs Opened Time : 15 - 20 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1.

Transparent Adhesive for inner Soles - Footwear Adhesives The NEOPRENE 3S is a plychloroprene transparent adhesive with strong grip , medium opend time uesd for sticking sides of the inner soles. Thanks to its peculiar transparency is especially used for leather goods or by leather company. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 45 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be sticked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Mono-component Polyurethane Adhesive for Sticking Leather On Soles - POLYURETHANE ADHESIVE WITH MEDIUM-HIGH VISCOSITY Neoplastic ABR is a mono-component polyurethane adhesive suitable for sticking leather and synthetic materials on soles. It can be reactivated at about only 50° C. It is possible to increase performances adding activator Desmodur (5%). High Crystallization PECULIARITY: REACTIVATION AT 40°C CHARACTERISTICS : Viscosity : 2800 +/- 100 Cps Reactivation : 40/50°C USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be sticked, wait for 20/25 minutes and then reactivate the adhesive at a temperature of 40/50°C and then press the two parts. In case of materials very oily or absorbent we advise to use our PRIMER-HP as a first hand. PREPARATION OF THE SOLES : LEATHER SOLES : No preparation TR SOLES : Wash the soles with PRIMER-FAC RUBBER SOLES : Card the soles and wash them with PRIMER-FAC PU SOLES : Card the soles TUNITH SOLES : Wash the soles with PRIMER-FAC The adhesive can be improved...