Produse pentru aplicatie (203)

Barre in acciaio sottoposte a 3 diversi passaggi: Sgrossatura Rettifica di semi-finitura Rettifica di finitura Che garantiscono alta precisione dimensionale e tolleranze minime per applicazioni industriali: Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Gradi disponibili AISI 304/316/431 Fino a 2000 ore di resistenza alla corrosione NSS ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm Acciai disponibili:AISI 304/316/431

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from various kinds of encrustations (lime, gypsum, calcareous concretions, saltpetre). To be applied after diluting with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals, therefore pay particular attention to surfaces in marble, limestone, floors and lead polished stones, carrying out appropriate preventive assessments. Protect metal surfaces. Operations of saline removal and stabilisation, removal of deposits of lime, gypsum, saltpetre, mosses; deep cleaning of leakages and media in general. Particularly suitable as a detergent in waterproofing interventions with Protech Balcony. Dilute the product in water based on the nature and size of the incrustation and/or of salt fouling to be removed. Spread the solution with a spray or brush, or even by pouring directly on the fouling to be removed. Leave on for a few minutes. Wash the foam produced by the acid reaction with copious amounts of water . Deterg-A can be used in various dilution ratios: from pure (undiluted) up to one part of product in 10 parts of water. In preparation of the supports to be waterproofed with Protech Balcony, consider diluting the product 1:4, for a consumption of 400 g/m² of solution. In this case, the consumption of Deterg-A is about 1 litre of product to dilute per 10 sqm of tiled surface to be waterproofed. Do not apply on marble surfaces, terracotta, natural stone, polished lead floors and galvanised surfaces. It is a corrosive product, pay attention to the security fact sheet. Always wear gloves when handling. From 0.10 to 1.00 kg of Deterg-A per square metre of surface to be treated, based on the type of material and the porosity of the support. Recommended: 0.25 kg/m² of tiled surfaces. Packaging: 1 kg bottle UM: €/kg

The label is inserted by the operator under the shaft which is located in front of the gluing cylinder which, with its continuous rotation, drag and applies a thin film of glue, handing the operator already ready to be applied. A special device allows the micrometric regulation of the glue, allowing a perfect gluing and the maximum cleanliness of the label. The EME gluing machines are made of stainless steel and brass, while the tray of glue is in ABS antacid. All parts in contact with the glue are interlocking and can be disassembled easily without any tools, making it quick and easy cleaning. USABLE GLUE: The gluing machines use a sticky compound consisting of powdered dextrin diluted in water. 400 grams of dextrin must be mixed with 600 ml of water. This is vegetable glue derived from potato starch. Example model:EME 230 N Useful width:230 mm Label power supply:manual

The reinforced pallet trucks of the Ferplast FPGS 30 series, with a capacity of 3000 Kg. Are extremely robust and suitable for heavy applications in the industrial and logistic sectors. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip Available in the following models: Pallet truck with forks mm. 800x400 Pallet truck with forks mm. 800x525 Pallet truck with forks mm. 1150x525 - the most requested Pallet truck with forks mm. 1500x525 Pallet truck with forks mm. 1800x525 Pallet truck with forks mm. 2000x525 Example model:FPGS 30/150/180/200 Load:Kg. 3000 Forks length l (mm):1500-1800-2000 Forks width b5:mm. 525 Single fork width e:mm. 150 Minimum fork height h13:mm. 85 Maximum fork height h3:mm. 115 Total length l1 (mm):1900-2200-2400 Rudder height h14:mm. 1160 Front wheels material:polyurethane Rear roller material :Nylon

The glue dosing system is a simple and reliable system that allows the application of a certain amount of glue on boxes, cartons, trays, etc. The expulsion of the glue is controlled by an electro-pneumatic valve, controlled by the operator with a pedal or button. The amount of glue to be dispensed can be easily adjusted using a timer. Thanks to the valve that discharges the excess air, it is also possible to apply just one glue point without risking leaking from the gluing machine. The gluing machines are supplied with about 3 meters of compressed air hose. The length of the tube can be changed during the order. Available models: FPTR 50.5 LCD electro-pneumatic gluing machine with adjustable temperature with thermostat from 20 to 200°C LCD display FPTR 55 LCD electro-pneumatic gluing machine with electronically adjustable temperature from 50 to 210°C LCD display FPTR 55 LCD HT electro-pneumatic gluing machine with electronically adjustable temperature from 50 to 250°C LCD display Example model:FPTR 50.5 LCD Air pressure:adjustable 1-6 bar Air consumption:100 l/min Temperature adjustable :20°-200°C Heating time:3-5 min Tank capacity:250 ml Extrusion capacity:250 ml/min

The labels are read by two sensors that, self-learning by the microprocessor, automatically identify the difference in transparency between the label and the backing paper, presenting the label on the peeler almost completely detached. Withdrawing the label the next pop-up automatically. The control board also allows to stop the rotation of the motor coil is completed, or in case of breakage paper signaling the anomaly with a sound signal. Label width:mm. 15-100 Label length:mm. 15-150 Power:30 W Dimensions:mm. 242x280x183 h weigth:Kg. 4

GALVANIZED MANUAL PALLET TRUCK MOD. FPGS25-G - CAPACITY 2500 Kg. The FGS25-G hand pallet truck is built with a galvanized structure and is therefore suitable for use in the pharmaceutical or chemical industry or in humid or saline environments such as fish markets and fishmongers. The internal pump is made of brass with excellent resistance to humidity and oxidation. This model is characterized by: - Structure in galvanized steel sheet -- Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm. mounted on ball bearings. - Double nylon loading roller diameter mm. Example model:52/80-2 FPGS25-SG Load:Kg. 2500 Forks length (l):mm. 800 Forks width (b5):mm. 525 Single fork width (e):mm. 150 Total lenght (l1):mm. 1200 Max. fork height (h3):mm. 115 Min. fork height (h13):mm. 85 Rudder height (h14):mm. 1160 Front wheels material:nylon Rear rollers material:nylon

New model for professional use with use of hot melt adhesives granulated or stick diam. 43 mm. and manual advancement (there is no need compressed air). The fusion system in closed tank allows to have in a few seconds a large amount of molten adhesive to a fast dispensing. The temperature is regulated by thermostat at bimetal strip, which ensures a particular strength and wear resistance. It also has a magnetic base that allows you to place it on metal surfaces. Available models: MS 200-TER: model with temperature regulation with thermostat MS 200-LCD: model with temperature adjustment by LCD display Example model:MS 200-LCD Extrusion capacity :2500 g/h Temperature control:Electrical Operating temperature:30~200°C Temperature tolerance:± 2°C Warm-up time:5 min. Tank capacity:250 ml Used glue:Granular - Stick diam. 43 mm

D-FPWR BOTTLES - SEMI-AUTOMATIC LABELING MACHINES FOR ROUND PRODUCTS Semi-automatic applicator for rolls of self-adhesive labels with maximum width mm 200/300 on bottles and cylindrical products with a diameter of mm 20 to mm 130 Main features: - Sturdy construction in steel and aluminum - Motorization of the product rotation roller and the drawing of the labels by means of stepper motors with variable speed and electronically synchronized - Microprocessor management electronics with storage of 40 working formats - Possibility to apply a wraparound label or front/back label and also with a different size with adjustment of the distance between the two programs - Maximum label width mm 200/300, and maximum coil diameter 300 mm - Change of format extremely simple and fast Model:D-FPWR Roll diameter:300 mm Core diameter:38-110 mm Supply Voltage:230 Vac-50Hz Power consumption:200W Overall dimensions:800x500x400 (H) Weight:Kg 25

This gluing machine for professional use permits the application of granulated or stick (diameter 43 mm) hot melt adhesives. Suitable for bonding large surfaces. The fusion system in the closed tank allows a large amount of melt adhesive in few second for fast delivery. The temperature is electronically controlled by the LCD, which guarantees a specific precision and ease of use. Thanks to the melting tank (optional) you can heat the glue prior to use by making use of the gluing faster and cheaper. Available models: FPTR 55 LCD: electro-pneumatic gluing machine with adjustable temperature from 50 to 210° C FPTR 55 LCD HT: electro-pneumatic gluing machine with adjustable temperature from 50 to 250° C Power supply:230V Power consumption:600W Air pressure:da 1-6 bar Air consumption:100 l/min Heating time:3-10 min Weight of the gluing:kg 1,4 Tank capacity:300 ml Capacity of extrusion:300 ml/min Temperature indication:Display LCD

Rubber Soles Bicomponent Adhesive The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. After the mix between the glue and the activator , the glue has a life of 2 hours more or less. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

The NEOPRENE 14 SPRAYING is a plychloroprene adhesive used for processing on the division of forniture, sticking of wood - textile and expanded polyurethan. Used for bonding expandeds and quits with difficult materials. Spray on both sides. COLOURS : Black, Pink, Grey and Neutral. CHARACTERISTICS : Viscosity : 700 +/- 100 cPs Opened Time : 15 - 20 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1.

Pk-LINE-Belt con telaio di supporto a sbalzo permette facili installazioni nelle più svariate necessità. Ampia gamma di dimensioni dei prodotti: Pk-LINE-Belt può trattare prodotti da 0,1 a 500 mm di altezza e fino a 320 mm di larghezza. Etichette verticali: La testa di etichettatura può applicare etichette in senso verticale dall’alto, per un’applicazione precisa e uniforme. Dimensioni etichette: Pk-LINE-Belt è disponibile per etichette da 20 a 100 mm con il modello Pk-X oppure da 20 a 150 mm con il modello Pk-X-150. Velocità di etichettatura: Il nastro di trasporto è regolabile in velocità da 0 a 30 mt/min. Tecnologia SYNCRO (esclusiva Packin): Grazie alla tecnologia SYNCRO si elimina la necessità di regolazioni complesse quando si cambia la velocità del nastro. Pannello di controllo intuitivo: Il pannello di comando touch-screen a colori (fino a 100 programmi) permette di controllare la macchina in modo semplice e intuitivo. Marcatori inkjet opzionali.

Transparent Adhesive for inner Soles - Footwear Adhesives The NEOPRENE 3S is a plychloroprene transparent adhesive with strong grip , medium opend time uesd for sticking sides of the inner soles. Thanks to its peculiar transparency is especially used for leather goods or by leather company. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 45 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be sticked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGING : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1

Wgate è la soluzione digitale (Industria 4.0) di Wise Ingegneria e Soluzioni Software per la gestione dell'accesso automezzi in azienda. Velocizzare le operazioni di registrazione, rilevazione tara/lordo e le operazioni di carico/scarico richiede una forte innovazione nelle procedure informatiche e nell'integrazione di strumentazione speciale. La soluzione Wgate consente di: - gestire un portale per consentire agli spedizionieri di prenotare il proprio acceso in azienda; - riconoscere il pass o la targa ed abilitare l'accesso tramite apertura automatica delle sbarre; - gestire la pesatura e rilasciare il foglio di carico e contestualmente avvisare tramite pannello o sms l'operatore incaricato di assistere il mezzo alle operazioni di carico/scarico; - controllare tramite Wlog la correttezza del materiale caricato e precedentemente approntato; - gestire le operazioni di uscita con eventuale emissione del documento di consegna, della packing list e dei documenti fiscali di spedizione.

INTONACHINO 1500 è un rivestimento plastico che consente di ottenere delle finiture simili all’intonaco civile. Risolve egregiamente tutti quei problemi di idrorepellenza, ancoraggio, durata e resistenza all'azione dello smog, della salsedine e degli alcali che sovente affliggono le strutture edilizie. A richiesta è disponibile anche in versione ANTIALGA. MASSA VOLUMICA: Kg. 1,790/1,000 litro RESA: Kg. 3,000/1,000 mq. circa TEMPERATURA MINIMA DI FILMAZIONE: deve essere applicato ad almeno + 5° C. Teme il gelo CONSERVAZIONE: in luogo fresco a +5°C. Teme il gelo SPESSORE DEL RIVESTIMENTO: mm 1,500 circa CONFEZIONI DA: Kg. 25,000 Kg. 9,000

Cosmo-TOUCH è un terminale la rilevazione delle presenze, ma anche per progetti personalizzati, integrabile facilmente a sistemi di terze parti ad esempio per la raccolta dati per commesse e produzione, il monitoraggio, la registrazione visitatori, mensa, info-point, ecc. Cosmo-TOUCH è basato su processore ARM®, sistema operativo Linux®. L'elettronica, il firmware e il software prodotti in Italia da TREXOM, consente la tranquillità di inserire nel sistema informatico un dispositivo che garantisce sicurezza, affidabilità ed efficienza, a tutela di Privacy e Cyber Security aziendali. Cosmo Touch dispone di Display 7′‘ con Touch Screen, processore ARM(R), sistema operativo Linux(R), scheda audio, 2 uscite USB (espandibili con apposito modulo), interfaccia Ethernet, Relè ed ingressi digitali (sia “on board” sia con la possibilità di espansione, tramite uno o più moduli aggiuntivi in cascata, per aumentare il numero di relè e di ingressi gestibili).

Industria 4.0 per Wise Ingegneria e Soluzioni Software significa consentire alle aziende manifatturiere e alimentari di poter contare su programmi flessibili, intuitivi ed ergonomicamente studiati per facilitare l'operatività nei reparti produttivi. Programmare e schedulare con le soluzioni Wprog, gestire la logistica con Wlog e Wgate, certificare con Wcert è molto più semplice se in produzione vi sono le soluzioni Wprod integrate con gli impianti e con il confezionamento. Wprod gestisce gli ordini di produzione, esegue il setup delle linee e delle periferiche di identificazione e controllo, raccoglie i quantitativi prodotti conformi e non, gestisce le non conformità ed i fermi di produzione. Wprod è altamente personalizzabile, fondamentale per le diverse realtà produttive in cui opera; come tutte le soluzioni Wise è interamente sviluppata internamente e fornita al cliente corredata di sorgenti il quale, vista la facilità d'uso della piattaforma di sviluppo può farsene carico.

Convertitore impulsi MBus per applicazioni metering in configurazione slave. Gestisce fino a 2 ingressi impulsi (reed switch, contatti puliti – open collector).

Mono-component Polyurethane Adhesive for Sticking Leather On Soles - POLYURETHANE ADHESIVE WITH MEDIUM-HIGH VISCOSITY Neoplastic ABR is a mono-component polyurethane adhesive suitable for sticking leather and synthetic materials on soles. It can be reactivated at about only 50° C. It is possible to increase performances adding activator Desmodur (5%). High Crystallization PECULIARITY: REACTIVATION AT 40°C CHARACTERISTICS : Viscosity : 2800 +/- 100 Cps Reactivation : 40/50°C USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be sticked, wait for 20/25 minutes and then reactivate the adhesive at a temperature of 40/50°C and then press the two parts. In case of materials very oily or absorbent we advise to use our PRIMER-HP as a first hand. PREPARATION OF THE SOLES : LEATHER SOLES : No preparation TR SOLES : Wash the soles with PRIMER-FAC RUBBER SOLES : Card the soles and wash them with PRIMER-FAC PU SOLES : Card the soles TUNITH SOLES : Wash the soles with PRIMER-FAC The adhesive can be improved...

Practical and pocket-sized. The GEL, denser and more viscous, ensures even stronger and more durable bonding. Perfect for vertical surfaces. It ensures excellent performance totally safety. You can use till the last drop! Ideal for bonding rubber, metal, ceramic, wood, leather, cardboard an various types of plastic except PE, PP, PTFE.