Produse pentru aplicatie (81)

Tubi di precisione trafilati a freddo in acciaio inox per cilindri oleodinamici - Tubi di precisione trafilati a freddo senza saldatura per cilindri oleodinamici in conformità alla norma EN10305-1 Acciaio inox AISI 304/304L e 316/316L Alesati/rullati/levigati ISO H8 In lunghezze commerciali 5-10 m o tagliati a misura Lunghezze commerciali:5-10 m

Tubi cromati esternamente e tubi telescopici cromati esternamente e alesati/rullati/levigati internamente ISO H8 per cilindri oleodinamici 120 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289. Riporto di cromo ≥ 20µm ISOf7 200 ore di resistenza alla corrosione in nebbia salina neutra (NSS) ISO 9227 Rating 9 ISO 10.289 Riporto di cromo ≥ 25µm ISO f7

Tubi di precisione in acciaio senza saldatura EN10305-1 e saldati EN10305-2 trafilati a freddo per cilindri oleodinamici e pneumatici E355 E460 E590 Tubi di precisione in acciaio senza saldatura EN10297 laminati a caldo per cilindri oleodinamici e pneumatici E355 Disponibili in lunghezze commerciali o tagliati a misura fissa Lunghezze commerciali:5-10 m HPZ senza saldatura/saldati:Atti a successiva alesatura/rullatura/levigatura HP/HPG senza saldatura/saldati:Alesati/rullati/levigati H8/H9

Pezzi lavorati su disegno del cliente. Grazie alla collaborazione con una rete di terzisti di altissimo valore tecnico in un tessuto industriale locale di lunga tradizione, Sidergamma offre l`opportunità di fornire materiale lavorato secondo disegno del cliente.

Tubi di precisione per cilindri oleodinamici Trafilati a freddo senza saldatura EN10305-1 (E355+SR) Trafilati a freddo saldati EN10305-2 (E355+SR E355+C) Laminati a caldo EN10297 (E355+AR E355+K2) Alesati e rullati, barenati, levigati ISO H8/H9 Disponibili in lunghezza commerciale o tagliati a misura fissa

Barre in acciaio sottoposte a 3 diversi passaggi: Sgrossatura Rettifica di semi-finitura Rettifica di finitura Che garantiscono alta precisione dimensionale e tolleranze minime per applicazioni industriali: Acciai disponibili:CK45 Acciai disponibili:20MnV6 Acciai disponibili:38MnV6/38MnVS6 Acciai disponibili:42CrMo4+QT

Gradi disponibili AISI 304/316/431 Fino a 2000 ore di resistenza alla corrosione NSS ISO 9227 Rating 9 ISO 10.289 Riporto di cromo standard ≥ 20µm Acciai disponibili:AISI 304/316/431

The spring is a crucial spring component for agricultural machinery, providing essential tension and support. Priced at just 0.70 € + VAT, this spring is an affordable solution for maintaining your equipment. Its robust design ensures reliability and longevity, making it a smart investment for both professional and hobbyist users. By choosing the spring, you can ensure that your machinery operates smoothly and efficiently, allowing you to focus on your agricultural tasks without interruptions.

The axle is a crucial component for agricultural machinery, providing essential support and stability. Designed for durability and efficiency, it ensures optimal performance in various farming tasks. With a competitive price of 15.00 € + VAT, this part is a must-have for anyone looking to maintain their equipment in top condition. Whether you are a professional farmer or a gardening enthusiast, investing in quality parts like the axle will enhance your productivity and equipment longevity.

The cup spring 10.5x50x2.5 h=4.5 is a specialized cup spring designed for agricultural machinery, providing essential tension and support. Priced at just 0.70 € + VAT, this spring is an affordable solution for maintaining your equipment. Its robust design ensures reliability and longevity, making it a smart investment for both professional and hobbyist users. By choosing the cup spring, you can ensure that your machinery operates smoothly and efficiently, allowing you to focus on your agricultural tasks without interruptions.

Our collaborative robots (cobots) are designed to work alongside human operators, enhancing productivity and safety in the workplace. These robots are equipped with advanced sensors and AI technology, allowing them to adapt to their environment and perform tasks efficiently. cobotss are ideal for repetitive tasks, freeing up human workers to focus on more complex activities. With easy programming and integration, these robots are a valuable addition to any manufacturing setup. The Collaborative Robot is a versatile robotic solution designed for flexible deployment and safe operation. Equipped with a gripper tool, vacuum system, and camera stand, this robot is ideal for various applications, including welding, cutting, and polishing. Its beginner-friendly programming interface and advanced safety features make it a valuable asset for industries seeking to enhance their automation capabilities.

Macchina Industriale 3 in 1 per Taglio, Saldatura e Pulizia La macchina industriale 3 in 1 per taglio, saldatura e pulizia è un’attrezzatura versatile progettata per ottimizzare i processi di lavorazione nei settori della carpenteria e della lavorazione dei metalli. Questa soluzione integrata consente di eseguire tre operazioni fondamentali in un unico dispositivo, riducendo i tempi di ciclo e aumentando l'efficienza produttiva. Caratteristiche Principali: Funzioni Multiple: Combinando le operazioni di taglio, saldatura e pulizia, questa macchina elimina la necessità di attrezzature separate, ottimizzando lo spazio in officina e riducendo i costi di investimento. Taglio Preciso: Dotata di un sistema di taglio avanzato, la macchina è in grado di eseguire tagli netti e precisi su una vasta gamma di materiali come acciaio, alluminio ecc, garantendo risultati di alta qualità. Saldatura Efficiente: La sezione di saldatura utilizza tecnologie moderne, come la saldatura a MIG/MAG o TIG, per unire i materiali in modo rapido e robusto, producendo giunzioni resistenti e di alta qualità. Pulizia Integrata: Il sistema di pulizia è progettato per rimuovere scorie e residui dai pezzi lavorati, migliorando l'aspetto estetico e preparando le superfici per ulteriori trattamenti o finiture. Facilità d'Uso: L'interfaccia intuitiva e i controlli ergonomici consentono un’operazione semplice e rapida, riducendo i tempi di apprendimento per gli operatori e aumentando la produttività. Sicurezza e Affidabilità: La macchina è equipaggiata con sistemi di sicurezza avanzati per proteggere gli operatori e garantire un ambiente di lavoro sicuro, prevenendo incidenti durante le operazioni. Applicazioni: Questa macchina 3 in 1 è ideale per l'uso in diversi settori, tra cui: Carpenteria Metallica: Per la lavorazione di strutture metalliche. Industria Automotive: Nella produzione e riparazione di componenti automobilistici. Costruzione di Attrezzature: Per la realizzazione di macchinari e attrezzature industriali. Lavorazione di Metalli: Per applicazioni in fabbriche e officine meccaniche. In sintesi, la macchina industriale 3 in 1 per taglio, saldatura e pulizia rappresenta una soluzione completa per le aziende che desiderano migliorare l’efficienza operativa, ottimizzare gli spazi di lavoro e ridurre i costi associati all'acquisto di più attrezzature.

Syntech Profix A two-component paste with a polyester resin base for the rapid realisation of structural fasteners and anchors for inserts and connectors in general. This quick-setting resin (which hardens in just 6 minutes at 20° C) facilitates the use of metal inserts a mere 2.5 hours from installation. Syntech Profix is a system that is easy and quick to use that provides high performance in terms of penetration, adherence and mechanical resistance. In particular, in concrete, natural stone, full and hollow brick works etc., the resin Syntech Profix, permeates the porous systems that delimit the perforation, allows the achievement of very high admissible loads, adjustable and scalable through variations of the fastening element, the anchor depth and so on. Syntech Profix is packaged in a two-compartment cartridge, whose special tip mixes the two components directly during extrusion, activating the polymerisation reaction instantly. Fixing of connectors, bars, plates, metallic structures, fencing, shutters, gates, shelves, reinforcing rods etc., in different types of media, with particular effectiveness in the presence of concrete, natural stone, bricks, drilled (through the perfo sleeves) etc. The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. The following accessories are provided for easy use of the cartridges Syntech Profix: - Gun for resins in a cartridge with rack-and-pinion piston. - Perfo sleeves (only for hollow masonry and perforated blocks) - Spout mixer for two-compartment cartridges (mixing tip) Extrude Syntech Profix in the required quantity in the fastening seat. Attach the metal insert to be anchored within a few seconds after the extrusion. Do not touch the insert for any reason until the ascertained hardening of the resin. Approximately 1.72 kg of Syntech Profix for each cubic decimetre of volume to be filled (variable according to the conditions of use). Bi-mix cartridge 400 cc - Box: 12 x (Bi-mix cartridge 400 cc).

Syntech Pavicrom PU Two-component aliphatic polyurethane coating, resistant to UV rays, coloured, in a vehicle solvent, for the glossy finish of concrete, fiberglass and steel surfaces. Excellent mechanical and abrasion resistance Wide range of colors available Uniform gloss finish Low maintenance over time Excellent resistance to UV rays and yellowing Resistant to atmospheric agents Possible non-slip finish Wide range of transparent finishes available Excellent resistance in aggressive atmospheres. Smooth or non-slip finish and coating, resistant to UV rays, water-repellent, with excellent abrasion resistance, for concrete and cementitious supports subject to mechanical stress; smooth finish for fiberglass surfaces, polyurethane insulation and waterproofing systems; colored coating of multilayer systems; colored coating for industrial floors of car parks, ramps, warehouses, etc. o concrete infrastructures such as bridges, viaducts, silos, tanks, pylons, etc.; smooth or non-slip finish and coating, on ceramic, clinker and porcelain stoneware surfaces; Also suitable for steel supports, after appropriate preparation and priming of the support. Concrete The surfaces to be coated must be stable, clean and free of substances that could affect the adhesion of the coating, such as dirt, grease, oil, residues of coatings and surface treatments, etc. The weak parts must be removed before applying the product by mechanical sanding with diamond discs and vacuum cleaning. The tensile strength of the concrete must not be less than 1.5 N/mm². Wet supports In case of residual humidity, apply two or more coats (depending on the irregularities of the support) of Syntech Pavidamp three-component epoxy primer. All cracks in the substrate must be treated and sealed before applying the three-component primer. Resin coatings The surfaces to be covered must be stable, clean and free of substances such as dirt, grease, oil, etc. which can affect the adhesion of the coating. Smooth the surface by mechanical sanding with diamond discs and vacuum. It is recommended to wash the surfaces and let them dry completely before applying the finish. Steel It is necessary to remove solder residues and grind the joints. Sandblasting at Sa 2½ according to ISO8501-1. The surfaces to be coated must be free of dirt, oil, grease and impurities. Average degree of surface roughness RZ ≥ 50 μm. An anti-corrosion treatment is recommended before applying the coating. Ceramic coverings, glass mosaic, porcelain stoneware, clinker Wash the ceramic surfaces to be treated with specific detergents to remove smog, dust, salts, etc. which block the pores to facilitate better capillary penetration of the primer onto the support. Humidity control Before installing resin systems and coatings, always check the residual humidity content. Check for the presence of residual humidity with the plastic sheet method according to the ASTM D 4263 standard: fix a thick polyethylene sheet with a minimum size of 45x45 cm to the support with adhesive tape. 24 hours after installation, lift the sheet and check the presence of traces of humidity. When tested with a carbide hygrometer, the moisture content of the substrate should be < 4% by weight. Primers Concrete The application of SYNTECH PAVICROM PU must always be preceded by the application of a coat of epoxy anchoring primer SYNTECH PRIMER EP-S. Wait 8-12 hours before applying the finish. Resin coatings The application of SYNTECH PAVICROM PU must always be preceded by sanding the entire surface in order to promote and guarantee optimal adhesion of the product to the support. Ceramic surfaces, glass mosaic, porcelain stoneware, clinker The application of SYNTECH PAVICROM PU must always be preceded by the application of a coat of specific primer SYNTECH PRIMER. Wait at least 6-8 hours before applying the finish. Combine the two components in the indicated mixing ratio. Add component B (hardener) to component A (base) and mix well until a completely homogeneous product is obtained. It is advisable to start mixing briefly with an electric drill at low speed and then intensify the stirring up to a maximum of 300-400 rpm. The product can be applied uniformly using a spray gun or short-haired roller to avoid accumulations of material which could give rise to aesthetic defects. The application of the product must be carried out by crossing the passes and paying particular attention to the shots, regularly unloading the roller beyond the applied area to obtain a uniform film and eliminate any accumulations of product. Apply one or more coats of Syntech Pavicrom PU respecting the consumption and thickness indicated. Wait approximately 12 hours, then apply the second coat of colored finish. Approximately 0.15 - 0.20 kg of Syntech Pavicrom PU for each square meter of surface to be coated in two coats. Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B] - Kit: 1 Can 3.3 kg [A] + 1 Can 1.7 kg [B] - Kit: 1 Can 13.4 kg [A] + 1 Can 6.6 kg [B]

Syntech Pavicrom A 2-component coloured finish, with an epoxy resin base in aqueous dispersion. Ideal for the pigmented coating of industrial flooring and concrete products in general. Surfaces treated with Syntech Pavicrom are easy to clean and provide excellent resistance to mechanical wear, as well as having a high resistance to water, alkaline solutions, detergents and hydrocarbons (oils, diesel, petrol, etc.). For protective and decorative painting of concrete floors, reviving the colour of old resin flooring, wall plinth enamelling, and so on. Perfect for mechanical workshops, manufacturing industries, warehouses and factories generally in which special and high chemical and mechanical resistance are required. The support on which the resin system is to be laid must be suitable for withstanding the stresses resulting from the intended use, such as static or dynamic loads, impacts, thermo-hygrometric dilatations, vibrations, etc. As regards the characteristics of the substrate (maximum humidity, cohesion, strength class, flatness, etc.) and the preparation of the surface that will accommodate the resin system, we recommend the requirements set out in chapter 5 of the UNI 10966 standard ("RESIN SYSTEMS FOR SURFACES HORIZONTAL AND VERTICAL - INSTRUCTIONS FOR DESIGN AND APPLICATION "). In any case, carefully clean and degrease the surfaces, removing any kind of dirt, paint residues or incoherent parts. The humidity of the support must be <= 3%. Evaluate the most convenient type of mechanical preparation (shot peening, sandblasting, hydro-washing, etc.). The surfaces must also be free from discontinuity, and possibly leveled and regularized with products from the FLOOR line or the REPAR line. Apply by roller, brush or spray from 150 to 200 g / m2 of Syntech Primer EP-W to consolidate the substrate and facilitate the adhesion of the subsequent coating. Apply Syntech Pavicrom when the primer is completely dry and no later than 24 hours from the end of its application. In case of presence (even suspected) of humidity deriving from capillary rising from the substrate, it is recommended to apply in advance the epoxy resin for "wet substrates" Syntech Pavidamp. Tiled floors, or floors covered with pre-existing resin, must be subjected to mechanical roughening carried out with shot blasting, milling, bush hammering, etc., until the total elimination of the waterproof crust and the opacification of the surfaces. Remove dust after abrasion. Mix component A and component B separately, directly in their packages, in advance. When applying, combine the two components into a single container and thoroughly mix for 2 minutes using appropriate equipment (trolling motor). To prevent any errors in the mixing ratio that would result in a lack of or incomplete hardening, do not extract partial quantities from the packaging. Next, pour component B into the container of component A. Syntech Pavicrom is applied with a “short-pile” roller within 24 hours after applying the primer. Add the dilution water: the first coat diluted with water at a rate of 10 ÷ 20% depending on the porosity, cohesion of the support and the temperature; the second finish must be diluted by 6 ÷ 11%. After adding the dilution water, continue mixing for a few minute. We recommend applying two overlapping coats of the product, at temperatures not lower than +5° C. The second coat must be applied within 24 hours. 3-5% by weight of quartz B0 or B1 (or hollow glass microspheres) can also be added to achieve a non-slip effect. In two coats, apply 0.25 to 0.40 kilograms of Syntech Pavicrom per square metre of surface to be covered. Can 5 kg [A] - Can 2.5 kg [A] - Can 5 kg [B] - Can 2.5 kg [B] - Kit: 1 Can 5 kg [A] + 1 Can 5 kg [B] - Kit: 1 Can 2.5 kg [A] + 1 Can 2.5 kg [B]

Sanafarbe P Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanafarbe P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and internal and external restoration paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. Sanafarbe P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours. Apply from 0.20 to 0.40 liters of Sanafarbe P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Syntech Pavicar Two-component coating based on epoxy and polyurethane resins; for the coating, waterproofing and elastic protection of roofs, terraces, pavements, stairs, car parks and surfaces that are cracked or subject to micro-cracks and crazing. High wear resistance Applicable on tarred surfaces and bituminous sheaths Walkable product suitable for covering and waterproofing flat roofs Ease and speed of application with quick intervention times Soft and velvety to the touch Elastic product resistant to dynamic stress Available in two colors. Waterproof coating of concrete, ceramic, porcelain stoneware, wood, sheet metal supports, tarred supports and bituminous sheaths, suitably primed. Creation of elastic and waterproof protections for multi-level parking areas, both internal and external. Ideal for waterproofing cycles of balconies, roofs and terraces as it does not require preliminary demolition work or replacement of coverings. Its application allows the creation of a continuous, elastic and waterproof layer resistant to wear and trampling. Approximately 2.0 kg of Syntech Pavicar for each square meter of surface to be covered, in two coats. Can 8.3 kg [A] - Can 16.7 kg [A] - Can 4.17 kg [A] - Can 1.7 kg [B] - Can 3.3 kg [B] - Can 0.83 kg [B] - Kit: 1 Can 4.17 kg [A] + 1 Can 0.83 kg [B] - Kit: 1 Can 8.3 kg [A] + 1 Can 1.7 kg [B] - Kit: 1 Can 16.7 kg [A] + 1 Can 3.3 kg [B]

Sanastof Bianco Premixed mineral composition based on natural hydraulic lime NHL 3.5, microsilic with pozzolanic activity, selected aggregates, high tenacity microfibers, light heat-insulating aggregates with low modulus of elasticity. It is used for smoothing and smoothing, both indoors and outdoors. It is perfectly compatible with multiple substrates: lime-based plasters, lime-cement, cement mortars, concretes, porous stone, bricks. Its characteristics make it particularly suitable for green building works and for the restoration of period and monumental buildings. The maximum grain size of the aggregate is 0.9 mm. Sanastof Bianco is a product based on natural hydraulic lime NHL 3.5, kaolin, marble dust, selected siliceous aggregates and light aggregates with a low modulus of elasticity, dimensionally stable. It is a natural product with high intrinsic breathability, without any trace of resins, solvents, diluents and radio-emissive aggregates. The product contains high tenacity microfibers which give great volumetric stability. The special rounded hollow aggregates, dimensionally stable, bring special qualities of thermal insulation, filtering of potentially harmful soluble salts and reduction of the elastic modulus to the shaving. The granulometric curve, the fineness of the binders and some rheological additives of natural origin, make the product particularly smooth during the drafting phase, even when laid on supports with rough or difficult surfaces. The calibrated physical-mechanical characteristics guarantee perfect compatibility on different types of substrates, especially on traditional plasters and mortars. The microsilic content with pozzolanic activity makes smoothing and smoothing performed with Sanastof Bianco highly durable, even in aggressive exposure environments. Quick and easy application on various substrates, such as: transpiring smoothing of wall casings; smoothing on modular wood fiber or calcium silicate coats; regularization of plastered surfaces; leveling of concrete surfaces; regularization and smoothing of repairs carried out with cement mortars; application to mainly thin thicknesses (from 1 to 4 mm) with simultaneous leveling of recesses, imperfections etc. In particularly severe operating conditions it is advisable to interpose, between the first and second coat, the alkali-resistant glass fiber mesh Armaglass 160 (the mesh must be partially drowned on the first still fresh coat of Sanastof Bianco). The breathability, combined with the other physico-chemical characteristics of the product, make the smoothing made with Sanastof an ideal support to accommodate any kind of paint and in particular mineral paints based on potassium silicate or slaked lime. Sanastof is the transpiring smoothing, with a low modulus of elasticity, recommended in all our dehumidifying systems made with the products: Sanatigh, Caleosana, Sanawarme, Unisan, Intosana. The application surfaces must be clean, free from dirt, crumbly and incoherent parts, dust, etc. Smooth substrates must be roughened (roughness> = 1mm). In the event that the support, after cleaning and roughening, is still dusty and crumbly, remove the totally incoherent parts dry with a spatula-brush, or assisting the removal operation with hydro-washing, then consolidate the support by impregnation with aqueous emulsion Protech Fix AC applied in two abundant coats, the second coat immediately before applying Sanastof Bianco with the "fresh on fresh" technique (the consumption of Protech Fix AC for this priming operation is between 120 and 250 gr / m2). Adequately wet the substrate with water before application, anticipating and repeating this operation several times in the case of very porous and absorbent substrates or in hot and arid climates. Approximately 1,3 kg/m² of Sanastof Bianco for each millimetre of thickness to be implemented (on average 3 - 3,5 kg per square metre). Bag 25 kg

Sanareg Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered. Sanareg is an alkylsilane water emulsion, non-hazardous, non-toxic and VOC-free. The application of Sanareg does not alter the original wall breathability. Particularly indicated in combination with the cycle of natural dehumidifying plasters Untersana, Sanatigh and Sanastof. This also applies to Untersana, Caleosana and Sanastof. Non-film reactive liquid based on an alkylsilane emulsion dissolved in water to be used for the inhibition of saline efflorescence in the dehumidifying restoration of masonry, by spraying or applying with a brush with rigid bristles. Sanareg penetrates into the capillary pores of mineral substrates and reacts with the hydroxyl groups encountered in its path, forming an invisible water-repellent barrier that does not allow water to escape to the surface, leaving the transpiration to water vapor unaltered. Remove the soilings and saline manifestations by vigorous brushing; then eliminate any dust residue. Surfaces should be as dry as possible at the time of application. Apply Sanareg by spraying or with a long-bristled brush, proceeding from the bottom upwards. Remove any surface excess. When used as a preliminary treatment before a plastering cycle, apply the first coat of rendering immediately after applying Sanareg. Sanareg is water-based, which is why its effectiveness is not compromised even if the substrate is not perfectly dry at the time of application. From 0.10 to 0.20 kg of Sanareg for each square metre of surface to be treated, based on the porosity of the support. Plastic can 5 kg - Plastic can 25 kg

Unisan A composite mortar that is fibre-reinforced, consolidating, dehumidifying, grey in colour and utilised for the structural restoration of crumbling old or monumental masonry. It contains no substances that are potentially harmful to masonry and is composed of NHL 3.5 natural hydraulic lime and hydraulic binders free from soluble salts, along with silicas with pozzolanic activity, selected siliceous-calcareous aggregates, specific shrinkage-reducing agents and resistant alkaline READYMESH fibres that confer high flex-traction whilst increasing the performance of the mortar’s fracture energy. In conjunction with ARMAGLASS STRUCTURA fibreglass mesh, it is ideal for the structural restoration of old walls or crumbling constructions. Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements. The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface". In the case of structural reinforcing slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with PROFIX, Grout Micro-J, Repar Tix G2 or Syntech IC 55. Pour about 2/3 of the mixing water into the mixer, add Unisan and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4). Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces. Approximately 15 kg/m² of Unisan for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Syntech Flexipur Syntech Flexipur is a two-component aliphatic elastic polyurethane resin in the solvent phase, with excellent characteristics of chemical resistance and flexibility, ideal for the protective finish of both new and restored reinforced concrete structures. Syntech Flexipur is applied by roller or spray (airless) creating a film-forming coating with high protective capacity and resistance to cracking (crack bridging ability). Syntech Flexipur is ideal for creating the surface protection of both new and existing reinforced concrete structures; The final protective treatment of coatings for commercial activities, offices, hospitals and public environments in general; It can be used for UV protection of solvent-free polymeric elastic sheaths. Mix the two components in their respective packaging. Then pour component B into the container of component A. Mix everything for 3-4 minutes using a low-speed mechanical stirrer until a homogeneous and lump-free mixture is obtained. Mix the dough again for a few minutes to mix the mixture. Apply the product within 60 minutes. Syntech Flexipur can be applied by roller or spray (airless). With manual roller application it is advisable to foresee 2 successive coats, spaced out by a minimum time of 5 hours (20 ° C and 65% R.H.). In the case of spray application (airless) it is possible to apply the recommended thickness of 200-300 dry microns in a single coat. The product must be applied at temperatures between +10 and + 35 ° C; optimal density and workability are obtained at a temperature of + 20 ° C. Approximately 80-120 g / m2 of Syntech Flexipur for each coat (apply two coats). Can 6.7 kg [A] - Can 3.3 kg [B] - Kit: 1 Can 6.7 kg [A] + 1 Can 3.3 kg [B]

Sanadek Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments. Product based on lime putty and natural pigments. Sanadek has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general. Decorative and interior renovation paint. The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, Sanaxil Fix primer, based on potassium silicate. The application of Sanaxil Fix can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio. Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours. Apply from 0.30 to 0.40 liters of Sanadek per square metre of surface to be painted. Pail 4 l - Pail 14 l

NUTRIEL incluye varias formulaciones de fertilizantes NPK para aplicación foliar y elaboradas con materias primas de alta calidad para tener una solubilidad total y baja salinidad. Las combinaciones de los elementos contenidos se han estudiado para proporcionar una nutrición equilibrada a los cultivos en diferentes fases fenológicas. Además de nitrógeno, fósforo y potasio, las formulaciones de NUTRIEL están enriquecidas con los microelementos esenciales (cobre, zinc, manganeso, hierro, boro, molibdeno) necesarios para prevenir y curar cualquier deficiencia de microelementos. Aspecto:Microcristales Aplicación:Foliar embalaje:1 Kg - 5 Kg - 25 Kg

Deterg-A Concentrated solution of buffered acids, anionic and non-ionic surfactants with high biodegradability, for deep cleaning of substrates from various kinds of encrustations (lime, gypsum, calcareous concretions, saltpetre). To be applied after diluting with clean water according to the proportions indicated in the technical data sheet. The product attacks carbonate minerals, therefore pay particular attention to surfaces in marble, limestone, floors and lead polished stones, carrying out appropriate preventive assessments. Protect metal surfaces. Operations of saline removal and stabilisation, removal of deposits of lime, gypsum, saltpetre, mosses; deep cleaning of leakages and media in general. Particularly suitable as a detergent in waterproofing interventions with Protech Balcony. Dilute the product in water based on the nature and size of the incrustation and/or of salt fouling to be removed. Spread the solution with a spray or brush, or even by pouring directly on the fouling to be removed. Leave on for a few minutes. Wash the foam produced by the acid reaction with copious amounts of water . Deterg-A can be used in various dilution ratios: from pure (undiluted) up to one part of product in 10 parts of water. In preparation of the supports to be waterproofed with Protech Balcony, consider diluting the product 1:4, for a consumption of 400 g/m² of solution. In this case, the consumption of Deterg-A is about 1 litre of product to dilute per 10 sqm of tiled surface to be waterproofed. Do not apply on marble surfaces, terracotta, natural stone, polished lead floors and galvanised surfaces. It is a corrosive product, pay attention to the security fact sheet. Always wear gloves when handling. From 0.10 to 1.00 kg of Deterg-A per square metre of surface to be treated, based on the type of material and the porosity of the support. Recommended: 0.25 kg/m² of tiled surfaces. Packaging: 1 kg bottle UM: €/kg

NUTRIEL comprend plusieurs formulations d'engrais NPK pour application foliaire et à base de matières premières de haute qualité afin d'obtenir une solubilité totale et une faible salinité. Les combinaisons des éléments contenus ont été étudiées pour fournir une nutrition équilibrée aux cultures dans différentes phases phénologiques. En plus de l'azote, du phosphore et du potassium, les formulations NUTRIEL sont enrichies des micro-éléments essentiels (Cuivre, Zinc, Manganèse, Fer, Bore, Molibdenum) nécessaires pour prévenir et guérir toute carence en micro-éléments. Aspect:Micro-cristaux emballage:25 Kg

NUTRIEL include several NPK fertilizer formulations for foliar applicaton and made with high quality raw materials in order to have full solubility and low salinity. The combinations of the contained elements have been studied to provide balanced nutrition to crops in different phenological phases. In addition to nitrogen, phosphorus and potassium, the NUTRIEL formulations are enriched with the essential micro-elements (Copper, Zinc, Manganese, Iron, Boron, Molibdenum) required to prevent and cure any micro elements deficiencies. Aspect:Micro-crystals

Valvola a sfera a passaggio totale, filettatura F/F, con farfalla in alluminio.

Minuteria meccanica settore Idraulica - settori di applicazione

The digital dynamometer for beverage cans is used to simply but precisely measure the pressure of every single lower lifters during the adjustment of the seaming machine. The main feature of this instrument is its practicality of measurement and major ease of reading compared to the standard digital one, as it is equipped with a cable that allows readings of parameters reaching every area of the machine.

Valvola a sfera a passaggio totale, filettatura F/F, con leva in acciaio. Limiti di temperatura:-20°C +160°C