Produse pentru allpremed hidrom dm (23)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg

Il est un biofertilisant foliaire à base de Zinc et Cuivre complexés avec hydracided’acide citrique, obtenu de forme naturelle.Il agit aussi comme correcteur de carences avec une petite quantité de Zinc et Cuivre, avec un haut niveaud’efficience fertilisant et avec une basse consommation énergétique par la plante.En conséquence on améliore l’état physiologique de la plante et il augmente indirectement la défensenaturelle, induit une meilleure résistance au stress et aux maladies produites par bactéries etchampignons. Il est un biofertilisant foliaire à base de Zinc et Cuivre complexés avec hydracided’acide citrique, obtenu de forme naturelle.Il agit aussi comme correcteur de carences avec une petite quantité de Zinc et Cuivre, avec un haut niveaud’efficience fertilisant et avec une basse consommation énergétique par la plante.

Wir bieten Wirkstoffe zum Einsatz in humanmedizinische oder veterinäre Arzneimittel mit entsprechender ausführlicher Dokumentation und Zertifizierung. Die Firma “Hommel” blickt auf eine fast 125 jährige Historie zurück. Wir liefern hochwertige Substanzen an die Pharma-, Lebensmittel- und Kosmetikindustrie. Hommel hat sich durch langjährige Erfahrung, hohe Flexibilität und stetige Zuverlässigkeit weltweit einen guten Ruf für seine Lieferung von Rohstoffen erworben. Unsere Kunden verlassen sich auf eine prompte und unkomplizierte Belieferung. Wir bieten Ihnen pharmazeutische Wirkstoffe sowie Hilfsstoffe und andere Substanzen aus unterschiedlichen Produktionen und oft mit mehreren Alternativen an. Unser Unternehmen verbindt langjährige Praxis mit moderner Technik und bietet Ihnen stets beste Qualität zu einem fairen Preis.

Solvent

COSMECEUTICAL SOLUTION WITH TRANEXAMIC ACID, KOJIC ACID, NICOTINAMIDE, HIGH, MEDIUM, AND LOW MOLECULAR WEIGHT HYALURONIC ACID, WITH MOISTURIZING AND DEPIGMENTING ACTION.

Application: ElectrophoresisGenetic testing : Amides Storing temperature: 2-8°C GHS pictogram: GHS07GHS08 Shipping condition: ambient Synonym: Propensäureamid 2-Propenamid Acrylsäureamid IUPAC: Prop-2-enamide Appearance: clear colorless solution UNSPSC-No: 41105319 Code:1138 Manufacturers:GERBU

HyalOne 60 mg Injection is used to treat pain in osteoarthritis patients who have not received adequate relief from simple pain medications or exercise and physical therapy. In adults over the age of 21, it is also used in plastic surgery to reduce wrinkles or folds on the face and to enhance the lips. HyalOne is a sterile, non-pyrogenic, and highly elastic injectable solution, which is based on purified sodium hyaluronate produced by bacterial fermentation of a high-molecular-weight fraction of hyaluronic acid. Hyaluronic acid is a substance naturally occurring in many tissues of the body, including cartilage and synovial fluid. It is a principal component of synovial fluid responsible for its viscosity and elasticity. Being a natural lubricant and shock absorber, hyaluronan is indispensable for proper joint function.

MINIRIN 0,1 MG ML NAZAL SPREY (2,5 ML)

AZELASTIN

Solution Hydro Alcoolique – Bidon De 5l Caractéristiques:Solution hydroalcoolique recommandée par l’OMS pour l’antisepsie rapide des mains Certificats:Cf fiche sécurité, taux alcool sup à 70% Minimum de commande:1 palette de 64 ou 128 bidons Stock actuel:11 000 bidons de 5L (entrepot ile de France) Production journalière:5000 bidons de 5L Packaging:Palette de 128 bidons de 5L Délai de livraison:2 jours (nous consulter en amont)

Adoport 0,5 Mg 50 Capsule - Immunosuppressants ACTIVE INGREDIENT:TAKROLIMUS COO:INDIA

Dauerplastische Dichtmasse HYLOMAR M ist eine technisch hoch entwickelte, dauerplastische Dichtmasse auf Polyester-Urethan-Basis. Die Dichtmasse ist beständig gegen die meisten Flüssigkeiten, darunter alle industriellen Kraftstoffe, Öle, Wasser und Sole, Luft, Turbinen- und Kolbenmotor-verbrennungsprodukte, Wasser, Wasser/Glykol- und Methanolgemische, Erdöl und synthetische Schmieröle auf Diesterbasis, Diesel und Kerosinflüssigkeiten (Avtur und Avcat) sowie Fluorkohlenstoff-Kältemittel. HYLOMAR M ist zwischen -50 °C und +250 °C temperaturbeständig und kann zum Abdichten von Dichtflächen und Gewindeteilen verwendet werden.

All variations of the Admix C-Series contain the same amount of reactive chemicals at their prescribed dosage rates and provide the same waterproofing and durability performance characteristics. Xypex Admix is blended into the concrete mix at the time of batching to waterproof and protect concrete from the start. It outperforms other methods because of its unique ability to become a truly integral part of the concrete matrix. The Admix C-Series has been specially formulated to meet varying project and temperature conditions.

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Solvent

AZELASTIN

APRAZOL 30 MG 14 MIKROPELLET CAPSULE

HUMIRA 20MG0,2ML INJECTOR

BIOSYNTHETIC HUMAN INSULIN

Application: ElectrophoresisGenetic testing : Amides Storing temperature: 2-8°C GHS pictogram: GHS07GHS08 Shipping condition: ambient Synonym: Propensäureamid 2-Propenamid Acrylsäureamid IUPAC: Prop-2-enamide Appearance: clear colorless solution Code:1107 Manufacturers:GERBU

INSULIN DETEMIR

ESMOLOL HYDROCHLORIDE

IMURAN 50 MG 100 TAB