Produse pentru allpremed hidrom dm (7)

Used to make filling primers for HYDRONYLON ® HN on bituminous felt substrates. CONSUMPTION: 2 kg/m 2 – using SW-1 technical mesh APPLICATION: Apply the first layer of HYDRONYLON ® HP on the prepared substrate using a brush or broom . After the first layer has dried, apply the second layer of HYDRONYLON ® HP through a SW-1 technical mesh (it is also permissible to apply the first layer of HYDRONYLON ® HP directly on the prepared substrate through a SW-1 technical mesh). The base coat should be made in at least two layers. PACKAGING:25 kg COLOUR:Grey

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Highly effective water repellent, mainly for polymer-sealed concrete products. Provides strong water repellent effect, minimizes capillary water absorption, minimizes efflorescence.

4-Hydroxycoumarin belongs to the group of coumarin derivatives. The intermediate is used in the pharmaceutical and agricultural industry. It is used mainly for anticoagulants such as Warfarin and rodenticides. Name:4-Hydroxycoumarine CAS Number:1076-38-6 Use:Warfarin Intermediate Use 2:Rodenticide Synonym:4-Hydroxy-2H-chromen-2-one Synonym 2:4-Coumarinol Synonym 3:Benzotetronic acid

liquid roof coating kit . PACKAGING:5kg, 25kg CONSUMPTION:0.25 kg/m2 COLOUR:graphite

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Effective water repellent for concrete products. Strong water repellent effect, reduction of capillary water absorption, minimizes efflorescence.