Produse pentru allpremed hidro dm (10)

iglidur® C500 Up to +250 °C, wear-resistant. iglidur® C500 can be used up to 250 °C, extremely media-resistant – including in cleaning processes with hydrogen peroxide – wear resistant, with low friction values. Also suited for a wide range of custom geometries or piston rings. High resistance to media and temperature Long-term service temperature +250°C Good coefficients of friction and wear Lubricant- and mainteance-free

Used to make filling primers for HYDRONYLON ® HN on bituminous felt substrates. CONSUMPTION: 2 kg/m 2 – using SW-1 technical mesh APPLICATION: Apply the first layer of HYDRONYLON ® HP on the prepared substrate using a brush or broom . After the first layer has dried, apply the second layer of HYDRONYLON ® HP through a SW-1 technical mesh (it is also permissible to apply the first layer of HYDRONYLON ® HP directly on the prepared substrate through a SW-1 technical mesh). The base coat should be made in at least two layers. PACKAGING:25 kg COLOUR:Grey

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Effective water repellent for concrete products. Strong water repellent effect, reduction of capillary water absorption, minimizes efflorescence.

40 centuries ago, the Egiptians and the Chinese have discovered the benefic effects of the essential oils. The Arabians have approached the same theme of scientific bases, as authors of some scripts containing studies about some botanic species. Rene Maurice Gattefosse, a french chemist, one of the fonders of modern aromotherapy, has discovered almost by accident the healing properties of some aromatic oils, in the years 20’s of the last century. The aromotherapy universe presumes alleviation with the perfumes’ help. This type of treatment is addressed not only to the body, but to the soul and the intelect, reestablishing the equilibrium of those entities. The essential oil is a real force which can swing the various aspects of the human being: physic, emotional, mental and spiritual.

Facilitates combing and subsequent shaping of the hairstyle Contributes to the restoration of the damaged hair structure Regenerates, strengthens and restores hair density Reduces brittleness and strengthens split ends Leaves hair soft, shiny, hydrated and healthy looking Ideal for everyday use and all hair types Protects against the effects of UV rays and external aggressors No parabens / no mineral oils / no dyes Recyclable packaging Description : Introducing an exquisite hair conditioner designed to care for and nourish your locks. Indulge your senses with an elegant experience provided by our artfully blended formula combining the finest natural ingredients with modern technology. Going beyond the limits of the usual, the conditioner restores the damaged structure of the hair. With each application, it actively regenerates, strengthens and restores the density of your hair, giving it backs Code:19129

liquid roof coating kit . PACKAGING:5kg, 25kg CONSUMPTION:0.25 kg/m2 COLOUR:graphite

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Protech Sil P Water-repellent, breathable, pigmented paint based on siloxane resins in water dispersion for painting and renovating civil and industrial buildings, and newly manufactured, for both external and internal facades. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P creates a microporous filter that effectively prevents the penetration of water and aggressive solutions without compromising the necessary breathability of masonry. Waterproofing and breathable, protective and decorative finishing, for façades in vintage buildings and monuments, subject to protection by the "cultural heritage" or otherwise. Painting of dehumidifying reinforcement cycles with macroporous plasters. Suitable for media like old and new mineral plasters and for pre-existing emulsion paints, provided they are adherent to the media. The application supports should be adequately prepared: free from fouling, powder, crumbling and non-adhering parts, etc., previously treated with the specific fixative Protech Sil Fix. The product can be applied by brush, roller or spray, in two coats. The maximum dilution with water will be 10-15% of the weight of the product. Apply from 0.25 to 0.35 liters of Protech Sil P per square metre of surface to be painted. Pail 4 l - Pail 14 l

Protech AC-P Paint based on acrylic resins in aqueous emulsion, for interiors and exteriors, protective lamellar structure which, in addition to having an aesthetic effect, allows maximum filling, transpiration and very high resistance to mechanical and chemical light. The high coverage and expandability make this product extremely easy to apply. The special acrylic resins that compose it allow to obtain a film characterized by a rapid insensitivity to water even during the drying phase, with a consequent reduction of the "snail effect" in the event of atmospheric events. Protective and decorative finish painting of walls, facades, concrete products, plasters, masonry, natural stone, porous substrates in general. For old plasters, pay particular attention to the old pre-existing paints, which must be removed by careful scraping and brushing in order to obtain a healthy and non-friable support; then proceed with the application of Protech Fix AC fixative. When applying on new plasters, it is good practice to insulate the base with acrylic insulator or even better with a white or neutral microemulsion fixative. Avoid windy or cold days when applying. Do not apply on fresh or particularly alkaline substrates, respect a minimum carbonation period of at least four weeks. On large surfaces it is recommended to apply product from the same batch and always proceed wet on wet to avoid signs of recovery. Never operate with temperatures below + 5 ° C. Rainy weather, excessive atmospheric humidity and temperatures below + 8 ° C can greatly compromise drying with the possibility of washing off by rainwater even after several days. . DILUTION (by volume with drinking water) BRUSH 1st COAT: 15% a crossed coat or two coats 12-24 hours apart 2nd COAT: 10%. ROLLER 1st COAT: 10% 2nd COAT: 10%. SPRAY (through specific equipment) 1st COAT: 15/25% 2nd COAT: 15/25%. To avoid filming defects, being resin-based products in aqueous emulsion, the application temperature must be between + 5 ° C and + 35 ° C with relative humidity not higher than 60/70%. Do not apply under the direct action of the sun and wind. Do not apply on fresh or particularly alkaline substrates, respect a minimum drying period of the substrate of at least four weeks. It is also advisable for colored, not to use on large surfaces dyed with different production batches as slight differences between batch and batch are technically possible. Please check the color before application as we will not respond to any disputes regarding the shade of the applied product. From 0.20 to 0.30 liters of Protech AC-P for each square meter of surface to be painted. Pail 14 l