Produse pentru allpremed hidro dm (3)

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Fluid Therm Multi-purpose Additive solution specific for the improvement of thermal conductivity of concretes, through balanced superlubricating, defoamer, plasticiser type actions. Fluid Therm is perfectly compatible in combination with steel Readymesh MM-150 (usually dosed at 25 kg/m³) or multifilament Readymesh PM-180 (usually dosed at 1 kg/m³) polypropylene fibres In radiant panel heating systems , the presence of high air content in the concrete forming the levelling screed can cause the correct spread of thermal energy to be severely obstructed; on the other hand, the conglomerate incorporates air already in the mixing phase in the form of microbubbles, while the excess mixing water and the segregation mechanisms that occur during transport and casting contribute to including additional quantities of air in the form of macrobubbles in the conglomerate. In this context, the peculiar defoamer, superlubricating and antisegregative actions of Fluid Therm, are particularly valuable as they allow the production of grouts and concretes with very low air content. Packaging: 10 kg canister UM: €/kg

Protech Sil P Water-repellent, breathable, pigmented paint based on siloxane resins in water dispersion for painting and renovating civil and industrial buildings, and newly manufactured, for both external and internal facades. Recommended as a breathable, water-repellent protective finish for macroporous dehumidifying plasters (Sanatigh, Sanawarme, Caleosana). Protech Sil P creates a microporous filter that effectively prevents the penetration of water and aggressive solutions without compromising the necessary breathability of masonry. Waterproofing and breathable, protective and decorative finishing, for façades in vintage buildings and monuments, subject to protection by the "cultural heritage" or otherwise. Painting of dehumidifying reinforcement cycles with macroporous plasters. Suitable for media like old and new mineral plasters and for pre-existing emulsion paints, provided they are adherent to the media. The application supports should be adequately prepared: free from fouling, powder, crumbling and non-adhering parts, etc., previously treated with the specific fixative Protech Sil Fix. The product can be applied by brush, roller or spray, in two coats. The maximum dilution with water will be 10-15% of the weight of the product. Apply from 0.25 to 0.35 liters of Protech Sil P per square metre of surface to be painted. Pail 4 l - Pail 14 l