Produse pentru alimente (104)

TABLETOP VACUUM PACKAGING MACHINE DZ 260 T Tabletop vacuum packaging machine with frontal sealing bar, made of stainless steel (AISI 304), equipped with digital panel and electronic volumetric sensor that enables the continuous vacuum control. This machine, with compact size, low consumption and a very short cycle time, is suitable for both the alimentary than for technical articles. The tank of modest size and the vacuum pump with a capacity of 8 m3/h. ensure high productivity. Sealing bars length:mm 260 Chamber dimensions:mm 385x282x100(H) Vacuum pump:8 m³/h Working cycle:about 30 sec

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing. Sealing width:mm. 5-10 Temperature:constant - maximum 200 °C Max sealing thickness:300 my (2x0,15 mm)

La capsulatrice semiautomatica mod. 'TSP' è adatta per l’applicazione di tappi a vite in alluminio (o in plastica) su bottiglie in vetro. Macchina semi-automatica realizzata in acciaio inox, con sollevamento bottiglia pneumatico. La distribuzione dei tappi avviene manualmente sulla bottiglia, mentre il ciclo di funzionamento è azionato con 2 pulsanti sul lato della macchina. Funzionamento elettrico con teleruttore e protezioni a norma CE. Ad avvenuta filettatura e sigillatura del tappo, il piattello discende automaticamente, per consentire la rimozione della bottiglia tappata con altra da chiudere. Testina capsulatrice a 4 rullini in acciaio inossidabile completa di dispositivo di sicurezza No-Cap No-Roll, idonea per ogni tipo di chiusura, anche tappo stelvin 30x60 Adatta per tutti i formati di bottiglie standard da 25cl a 150cl Disponibile testa a frizione magnetica per tappi prefilettati in plastica o twist-off Produzione: circa 600 B/H

TABLETOP VACUUM MACHINE - 1 FRONT BAR LENGTH 450 mm Professional bench vacuum machines in stainless steel, which can be set from the panel with 10 customizable programs. Through the convenient display it is possible to view the various parameters of the vacuum. The display shows the need for oil change with a special message. An electronic sensor of last generation detects the degree of vacuum obtained inside the chamber. All FPMV models are endowed with a safety system against the risk of sealing bars overheating. Vacuum capacity is 99,9%. Available models: FPMV 45 1BF - 1 450 mm front bar - 20 mc/h vacuum pump - without gas FPMV 45 1BFG - 1 450 mm front bar - 20 mc/h vacuum pump - with gas Only when ordering is it possible to request the integrated printer for printing an adhesive label showing the packaging data. Sealing bars length:mm 450 Chamber size:mm 466x405x117H Nr. gas nozzles for bar (only in the version with gas):2 Vacuum pump:20 m³/h Cycle time :24 seconds Air re-entry time:8 seconds

Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place. Sealing width:mm. 8-10 Max product weight:10 Kg Temperature set:0° - 250° Weldable material:PP –PE-Coupled

STAINLESS STEEL VAC SERIES New series of professional external vacuum packing machine external for counter. Very robust as made entirely of stainless steel. Operation with embossed envelopes or three layered. Perfect for use in restaurants, catering or domestic environment are supplied with CE certificate and manual of use and maintenance. Main features: Working cycle fully automatic, space-saving, self-lubricating pump. Sealing bar dimensions:mm 330 or 430 or 530 Air suction:l/min 10 or 20

Facchinaggio

2 side sealing bars lenght 600 mm, vacuum pump 40 m3/h. Also available with MAP - Vacuum packaging machine with trolley and double lateral sealing bars, made of stainless steel (AISI 304). Equipped with digital panel and volumetric electronic sensor for the steady control of vacuum. Volume increased chamber and convex lid for a max eight of 250 mm. The vacuum pump of 40m3/h with three-phase 380V motor ensures high productivity. The two side bars with a length of 60 cm allow to pack more bags simultaneously (on one or both of the bars), reducing packing times. Is however possible to use it with a single bar. The DZ 600 2S packaging machine is also used for the vacuum seal and the jars of creams, jams, etc .. The vacuum chamber utilizes specific smooth envelopes for vacuum. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. Sealing bars length:mm 600 Number of bars:2 laterals Vacuum pumps:40 mc/h Work cycle:about 30 sec Useful width:mm 530 Useful lenght:mm 620 Useful heigth (chamber + lid):mm 160/250

Manual eyeleting machine suited to the insertion of the eyelets on boxes of pasta, biscuits and food in general. The eyelet is very used to attach the jumper on which are printed all product-related information. Usable eyelets:eyelets diameter mm. 7 and 9 Total Length:mm. 220

Automatic rinsers respectively with 4 and 6 positions operate using a water injection system with continuous flow. An optional recirculation kit with an integrated filtration system allows the use of a sterilizing or rinsing solution. An 'air blowing' version is also available. These machines allow the internal rinsing of new containers before filling, without wetting the exterior, using water previously filtered through a 0.35µm filtration cartridge. They do not require equipment for additional formats: format change is achieved through a few simple adjustments. The machines are entirely constructed in AISI 304 Stainless Steel and with plastic materials compliant with relevant directives. Machines provided in this manner are ready for integration into bottling or food packaging lines. Production: 800 bottles/hour for 4 positions - 1500 bottles/hour for 6 positions.

These machines are suitable to the closure in horizontal bags with maximum height mm. 300 and max weight. 5 kg. The welding system with belts PTFE allows the closure of bags made ​​of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is controlled by an electronic temperature controller and the feed speed is adjustable. The distance between the welding and the edge of the bag is 10 mm. The distance (width) between the welding head and the conveyor belt is adjustable and is also adjustable the height of the conveyor belt relative to the floor. The machine is equipped with rotary solid ink marker and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy handling and comes complete with photocell to make the marking at the desired point. Max weight of product:5 Kg Sealing width:mm. 10 Temperature set :0° - 300° Sealable materials:PP –PE-Coupled

Le lavadoras automáticas de 4 y 6 posiciones funcionan con un sistema de inyección de agua a presión. Un kit especial de recirculación con sistema de filtración integrado, disponible opcionalmente, permite el uso de una solución esterilizante o de enjuague. También está disponible la versión 'sopladora' de aire. Permiten enjuagar internamente recipientes nuevos antes del llenado, sin mojar el exterior, con agua previamente filtrada mediante cartucho de filtración de 0,35 µm. No requieren equipos adicionales para diferentes formatos: el cambio de formato se realiza mediante ajustes simples. Las máquinas están fabricadas completamente en acero inoxidable AISI 304 y con materiales plásticos que cumplen con las regulaciones aplicables. Estas máquinas están listas para integrarse en líneas de envasado o embotellado de alimentos. Producción: 800 botellas/hora para 4 posiciones - 1500 botellas/hora para 6 posiciones.

DOUBLE CHAMBER STAINLESS STEEL VACUUM MACHINE WITH TRANSLATING HOOD FPHVC 820G - WITH ATM AND 100 m³/h PUMP Large vacuum packaging machine with two stations equipped with front and rear sealing bars, translating bell equipped with a comfortable handle and springs for weight balancing. Construction in stainless steel (AISI 304) with rounded shapes for easy cleaning, digital panel, vacuum gauge for constant vacuum control and 100 m³/h vacuum pump for a high packaging speed. The opposing sealing bars have a length of mm. 820 and the distance between the front bars and the rear bars is 700 mm. The machine is equipped with a gas injection valve (packaging in MAP). Number of sealing bars:2+2 front-rear Sealing width:mm 3x2 (two 3 mm parallel seals) Length of sealing bars:mm 820 Chamber dimensions:mm 910x800x225 Useful chamber dimensions:mm 820x650x180H pump:100 m³/h Working cycle:25- 30 seconds

ALIMENTARY PALLETS WITH RUNNERS The new alimentary plastic pallets with runners are rugged, lightweight, easy to handle and environmentally friendly. Color: WHITE. Material: PE. Recyclable. Alymentary use. Versions: A: honeycomb structure, enhanced in strength and solidity, are ideal for intensive use; E: Floor sleepers and co-molded in a single piece. Excellent for use in automated systems for transport and storage. Minimum Order: according to the model. Example model:My – E 031 Dimensions (mm):800x1200x150 Border:NO Static capacity (kg):4000 Dynamic capacity (kg):1000 (500 on RACK)

Le sciacquatrici automatiche rispettivamente a 4 e 6 posizioni, funzionano con il sistema ad iniezione d’acqua a perdere. Un apposito kit di ricircolo con sistema di filtrazione integrato - fornito in opzione - permette di utilizzare una soluzione sterilizzante o di avvinatura. E' disponibile anche la versione 'soffiatrice' ad aria. Permettono di sciacquare internamente recipienti nuovi prima del riempimento, senza bagnare l’esterno, con acqua precedentemente filtrata tramite cartuccia di filtrazione 0,35µm. Non necessitano di attrezzature per formati aggiuntivi: il cambio formato avviene tramite poche semplici regolazioni. Le macchine sono interamente costruite in Acciaio Inox AISI 304 e con materiali plastici conformi alle direttive in materia. Le macchine così fornite sono da intendersi pronte per l’inserimento in linee di imbottigliamento o confezionamento alimentare. Produzione: 800 bottiglie/ora 4 postazioni - 1500 bottigli/ora 6 postazioni.

Manual clamp eyeleting machine for eyelets type 7-9-051 and type 31-80 on bags - The GIGA manual eyelet clamp, thanks to the long steel levers, allows the eyelets used for packaging to be applied with minimum effort. Furthermore, by changing only the punches, it is possible to apply the larger eyelets (like sail for towels and banners from VELA 31 to VELA 80) Eyelets used:Type 7-9-051 VL eyelets used: VL large eyelets from 31 to 50 VL and from 60 to 80 VL

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling. Max. seal length:mm. 450/mm. 600 Seal width:mm. 5 Sealable materials:PE-PP-AL/PE

Mechanical eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Eyeleting with mechanical pedal, double head with automatic feeder and support frame, suitable for any process where it is required the simultaneous closing of the two eyelets. The eyeletting is applied in the paper converting industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 40 to mm. 200

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Number of bars :2 Sealing bars length:mm 500 + mm 760 Work cycle:about 30 sec Vacuum pumps:40 m³/h Useful width :mm 820 Useful lenght:mm 530 Useful height (chamber + lid):mm 120/190

Pneumatic eyeletting machine with double heads for 9 mm eyelets, 7 mm, type 051 - Pneumatic eyeletting with dual head with automatic feeder, suitable for any process where it is required the simultaneous closing of the two eyelets, complete with support frame and security guards. The eyeletting is applied in the paper industries, offices bank or post office, anywhere where there is a need to securely seal their products but use is higher in the food industry for sealing and the simultaneous application of cards printed on plastic bags. Steel painting base plate:mm. 360 x 500 Usable eyelets:type 7-9-050-051 Distance between heads:from mm. 45 to mm. 100 (from mm. 45 to mm. 180 optional)

DISPENSER FOR WINDING PANS Minidispenser is a handy dispenser extremely functional and easy to use. It is the ideal machine for wrapping with stretch film suitable for all types of food in the trays. Structure:Stainless steel Sealing plate size:mm. 385x123 Sealing plate temperature:adjustable Max reel width:mm 500

PPF SERIES: PNEUMATIC FILLERS FOR CREAMS AND SAUCES STAINLESS STEEL AISI 304 - easy washable Volumetric dosing with pneumatic operation series PPF for the dosing of sauces and creams. Stainless steel AISI 304 construction with column for floor installation and adjustable support. Easy use and cleaning idael for small workshops and frequent variations in production. Designed for dispensing food products, chemicals, cosmetics, pharmaceuticals, etc. Available in five models with capacity max. 250 ml. - 500 ml. - 1000 ml. - 2000 ml - 5000 ml. The internal volume of the hopper is approximately 25-30 liters depending on the model. The dispenser is equipped with an adjustable work surface with a maximum height of mm. 500. To obtain a suitable working height to maintain a correct position during the dosage it is advisable to purchase the stainless steel support with feet. Example model:PPF-500 Pressure:0.4-0.6 Mpa Capacity:100-500 ml Speed:5-10 cycles/min Precision:≤1%

Manual eyeleting machine suited to the insertion of the eyelets on boxes of pasta, biscuits and food in general. The eyelet is very used to attach the jumper on which are printed all product-related information. Usable eyelets:eyelets diameter mm. 7 and 9 Total Length:mm. 220

LEVER OPERATED YELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame, without stand. Suitable for smaller volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, bank office, post office and in many others field. It is especially used in food industry for to seal and at the same time for to apply a printed card on plastic bags. Structure :Cast-iron frame Painted steel base plate:mm. 310 x 240 Usable eyelets:type 7-9-050-051

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420 Chamber height (tank + cover):mm70/130 Vacuum pump:20 m3/h Work cycle:about 30 sec Sealing bars:2 lateral

Suitable for kitchens and food laboratories. Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY - WITH UNDERCOUNTER Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The lower floor is reinforced and soundproofed at high capacity. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with widths of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm.

Laveuse pour le nettoyage externe de bouteilles et de pots en verre. Le modèle Lab-10 est conçu pour être intégré dans des lignes d'embouteillage avec une production allant jusqu'à 1200 bouteilles/heure (pour des productions supérieures, d'autres modèles jusqu'à 10 000 bouteilles/heure sont disponibles). Grâce à son moteur de traction intégré et à sa taille compacte, son installation est simple et possible dans toutes les conditions. La machine est équipée d'une série de dispositifs pour un nettoyage minutieux de toutes les parties de la bouteille : - une brosse supérieure réglable en hauteur pour le nettoyage du bouchon - une brosse inférieure pour le nettoyage du fond - une brosse centrale verticale, rotative à haute vitesse, pour nettoyer toute la surface de la bouteille. Une fois le lavage de la bouteille terminé, deux lames de soufflage en acier inoxydable, alimentées par un ventilateur à haute pression, sèchent toute sa surface pour permettre l'étiquetage.

Washing machine for external cleaning of glass bottles and jars. The Lab-10 model is designed for integration into bottling lines with productions of up to 1200 bottles/hour (for higher productions, other models are available up to 10,000 bottles/hour). Thanks to its integrated traction motor and compact dimensions, its installation is simple and possible in any condition. The machine is equipped with a series of devices for the thorough washing of all parts of the bottle: - Adjustable-height upper brush for cap washing - Lower brush for bottom cleaning - High-speed rotating central vertical brush for washing the entire bottle surface Once the bottle washing is completed, two stainless steel blowing blades, powered by a high-pressure fan, ensure the drying of the entire surface for labeling.

Coloranti da prodotti naturali e biologici, il concentrato di succo di carota nera fornisce superbi colori rossi e derivati. Utilizzato principalmente nelle bevande e nei dolciumi, fornisce applicazioni coerenti e omogenee del colore su tutto il prodotto finale. 57 BX - 65 BX 0 - 100 NTU 2,5 CU - 12 CU Può essere spedito con fusti asettici da 20 kg o fusti normali asettici.

We provide high-quality Italian organic tomato products, such as diced, pulps, purées, semi-concentrated, and concentrated pastes of various Brix levels prepared using organic tomatoes for the B2B bulk, Retail, and HORECA sectors in various packagings using aseptic filling ensuring optimal hygiene and preservation.