Produse pentru • i (452)

The flanged valve with pneumatic actuator and body made of gray cast iron or spheroidal graphite iron in installation length and flange pattern according to DIN. Limit switch Pilot valve Manual override version with pressure relief Size:DN 15 - DN 150 Pressure:PN 16 Material:EN-GJL-250 (GG 25), EN-GJS-400-18-LT (GGG 40.3) Media temperature:-10°C to +170 °C Connection:Flange acc. to DIN EN 1092-1 Application:Gases, vapours, fluids

i/p converter for the electrical control of pneumatic positioners. Suitable for field and switch cabinet assembly. Suitable for remote control of valves in hazardous areas. Also in Ex version II 2 G EEx ib IIC T6. Body:Aluminum anodised Temperature:-10 °C to +60 °C Connection:G 1/8" Protection class:IP54 Input:0 - 20 mA or 4 - 20 mA Output:0.2 - 1 bar or 0.5 - 4 bar Air in:4 - 6 bar with output 0.2 - 1 bar 5 - 6 bar with output 0.5 - 4 bar

The segment disc valve type 5020 with pneumatic actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles Size:DN25 - DN300 Pressure DN25 - DN200:PN25 Pressure DN250 - DN300:PN16 Material:Stainless steel 1.4571 / 1.4408 C-steel 1.0570 Media temperature:-60 °C up to 220 °C

The sliding gate manual valve type for high temperature type 8053 in reinforced version is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can thus be shut off safely and controlled excellently, even in the high temperature range. Size:DN15 - DN200 Pressure:PN 10/40, PN100 ANSI #150, #300, #600 Stainless steel:Body 1.4408 / 1.4581 Cover 1.4404 / 1.4571 Carbon steel:Body 1.0619 / 1.0570 Cover 1.0570 / 1.4404 Media temperature: -60 °C up to 350 °C

The sliding gate valve type 8040 in reinforced design and long construction is universally applicable for neutral and aggressive media in the chemical industry, process engineering and plant construction. This sliding gate valve with its small stroke achieves a very high switching capacity with extremely short switching times. Size:DN15 - DN200 Pressure:PN 10/40, ANSI #150, #300 Stainless steel:Body 1.4408 / 1.4581, Cover 1.4404 / 1.4571 Carbon steel:Body 1.0619 / 1.0570, Cover 1.0570 / 1.4404 Media temperature:-60 °C up to 350 °C Connection:Wafer type design

The adjustable sliding gate orifice type 8090 is suitable for precise and continuous adjustment of a defined flow. It can be adjusted and secured manually in the installed state during operation. Among other things, the orifice facilitates the hydraulic adjustment of cooling systems, e.g. when commissioning large engines in CHPs and on ships. Size:DN15 - DN150 Pressure:PN 10/40 Material:Stainless steel 1.4581 / 1.4408 Carbon steel 1.0619 Media temperature:-60°C up to 350 °C

The segment disc manual control valve type 5020 with manual actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles. Size:DN25 - DN200 Pressure DN25 - DN200:PN25 Pressure DN250 - DN300:PN16 Material:Stainless steel 1.4571 / 1.4408 C-steel 1.0570 Media temperature:-60 °C up to 220 °C

Probably the most hygienic way of controlling a flow of media is for the valve not to touch the media at all. The endless tube pinch valve operates according to this principle. The medium is channelled through a tube and the valve compresses the tube pneumatically. This constriction of the hose adjusts the flow. This principle means the valve is suitable for lots of critical applications in the chemicals, food and pharmaceuticals industries. Size:DN 6 - DN 14 Pressure:Depending on the tube used Body:Stainless steel 1.4301 Media temperature:-30 °C to +170 °C

The pneumatic sliding gate control valve type 8028 with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve is characterised by high control precision and a long service life. Digital positioner type 8049 Positioner type 8049 in explosionproof version Positioner with integrated process controller type 8049 IPC Metal bellows Limit switch Position feedback Pilot valve . . . Size:DN15 - DN150 Pressure:PN 10/40 Stainless steel:1.4581 / 1.4408 Carbon steel:1.0570 / 1.0619 Media temperature:-10 °C up to 350 °C Connection:Wafer type design

Strainer for protecting downstream plant components against contamination. All parts in contact with the media are made from stainless steel, therefore it is also suitable for aggressive media. Size:DN 10 - DN 80 Pressure:PN 40 Body:Stainless steel 1.4408 Interior parts:Stainless steel 1.4571 / 1.4310 / 1.4301 Media temperature:-20 °C up to +220 °C Application:Gases, vapours, liquids Mesh width:0.25 mm optionally 0.8 mm

Compact i/p and p/p positioner for mounting on pneumatic control valves ("top mounted"). Also available in intrinsically safe version or as a pneumatic positioner (control signal 0,2 1 bar). Material:Nickel-plated brass Connection:G 1/8" Actuator variants:For linear actuators Input signal:0/4 - 20 mA Nominal stroke:5 - 22 mm Protection class:IP 54 optional:intrinsically safe Ex II2G EEx ib IIC T6

Highly accurate flanged motor valve for on/off and control operation with neutral and aggressive media. A version with failsafe option is available. Flanges acc. DIN EN 10921 Flanges acc. ANSI #150 Positioner electronics, limit switch, position feedback All control actuators are also available with fail safe feature. Pressure balanced version Degreased version, Silicon or PTFEfree version … Size:DN 15 - DN 50 Pressure:PN 40, ANSI #150 Material:Stainless steel 1.4408 Media temperature:-30°C to +200 °C Control force:2kN, 5kN Motor voltages:24 V AC/DC, 230 V, 110/120 V Control:3-point; (0)2-10V; (0)4-20mA Application:Gases, vapours, liquids Protection class:IP67

Probably the most hygienic way of shutting off a flow of media is when the valve does not touch the fluid at all. This is the principle used by this small diameter endless tube valve, in which the fluid is passed through a hose pneumatically compressed or relieved by the valve. Size:DN2 - DN6 Pressure:Depending on the tube used Material Body:Polyamide 12 Media temperature:-30 °C to +100 °C

Pneumatic control valve with angle seat design. The integrated positioner type 8049 means that a compact design is achieved. All parts that come into contact with the medium are made from stainless steel. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version … Size:DN 8 - DN 80 Pressure:PN 40 Material:Stainless steel 1.4408 Media temperature:-30 °C to +200 °C Accessories:Inductive limit switches Application:Gases, vapours, liquids

The pneumatice pinch valve with its integrated positioner is non sensitive by contaminated, granulated, viscous, doughy and aggressive media. Furthermore it is (depending on the tube material) suitable for sanitary and aseptic applications because of the FDA approval. Size:DN 15 - DN 50 Pressure:PN 6 Material:Stainless steel 1.4408 Media temperature:-40 °C to +160 °C

High resolution (dead band ± 0.6%) • Robust aluminium housing • Multiple options for adjustment and diagnostics • Metall valve coupling • Manual override • Fail safe feature available Material:Body completely aluminium Temperature:-10 °C up to +60 °C Input signal:0/4 - 20mA, 0/2 - 10V 3 point operation Nominal stroke:20 mm Protection class:IP65 Supply:24V AC/DC 90-260V AC

The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve Size:DN 15 - DN 250 Pressure:PN 10/40, PN100, ANSI #150, #300, #600 Stainless steel:Body 1.4408 / 1.4581, Cover 1.4404 / 1.4571 Carbon steel:Body 1.0619 / 1.0570, Cover 1.0570 / 1.4404 Media temperature:-60 °C up to 350 °C Connection:Wafer type design

Compact valve manifolds with low piping effort, reduced maintenance time and minimize investment costs. A connection system well known from the field of hydraulics and adapted to the respective application, allows for the intelligent combination of several valves in a customerspecific manifold. All necessary connections between the individual process valves are integrated in the manifold. Size:DN 15 - DN 50 Pressure:PN 40 Material:Stainless steel 1.4571 / 1.4404 / 1.4301 / 1.4305 Spheroidal graphite iron (EN-GJS-400-15) Media temperature:-30 °C to +200 °C

Pneumatic control valve with angle seat design. The angle seat design offers a high flow capacity, the flange connection an easy installation. The integrated digital or analogue positioner is coming along with a very compact design. All wetted parts are made from stainless steel. Flange acc. to DIN EN 10921 Flange acc. to ANSI #150, ANSI#300 Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof versionPiston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Pressure balanced version Degreased version, Silicon or PTFEfree version … Size:DN 15 - DN 80 Pressure:PN 40, ANSI #150, ANSI #300 Material:Stainless steel 1.4408 Media temperature:-30°C to +200 °C Accessories:Inductive limit switches Application:Gases, vapours, liquids

The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently. Size:DN15 - DN250 Pressure:PN 10/40, PN100 ANSI #150, #300, #600 Stainless steel:Body 1.4408 / 1.4581 Cover 1.4404 / 1.4571 Carbon steel:Body 1.0619 / 1.0570 Cover 1.0570 / 1.4404 Media temperature:-60 °C up to 350 °C

The self operated pressure regulator type 8011 with closed spring cover in the form of a pressure reducing valve (downstream pressure regulator) or an excess flow valve (upstream pressure regulator) is used in a wide range of process engineering control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy. Size:DN15 - DN125 Pressure:PN 10/40 Material:Entirely stainless steel Body 1.4581 / 1.4408 Actuator 1.4571 Diaphragm materials:CR, EPDM or FKM, optional with PTFE foil Media temperature:-30 °C up to 230 °C

The pneumatic sliding gate control valve type 8028 in reinforced GS3 design with integrated positioner and with an 80 mm diaphragm actuator is ideal for compact plant installations in process technology. In addition to the compact design, this valve is characterised by high control precision and a long service life. Digital positioner type 8049 Positioner type 8049 in explosionproof version Positioner with integrated process controller type 8049 IPC Metal bellows Limit switch Position feedback Pilot valve . . . Size:DN15 - DN150 Pressure:PN 10/40, ANSI #150, #300 Stainless steel:Body 1.4571 / 1.4581 / 1.4408 / 1.4581, Cover 1.4404 / 1.4571 Carbon steel:Body 1.0619 / 1.0570 Media temperature:-60 °C up to 350 °C Connection:Wafer type design

The highpressure sliding gate control valve type 8021 with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be precisely controlled even at high operating and differential pressures. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . . Size:DN25 - DN250 DN25 - DN80:PN160, ANSI#900 DN100 - DN150:PN100, ANSI#600 DN200 - DN250:PN40, ANSI#300 Valve body:Stainless steel 1.4571 Disc:STN2, STN3 (DN25 or DN50) Media temperature:-60 °C up to 350 °C

The ball sector valve type 4040 with pneumatic actuator can be used for almost all on/off and control applications, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity. Size:DN 25 - DN 300 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN300:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Highquality angle seat manual valve made from stainless steel, also suitable for neutral and aggressive media. The angle seat design offers a high flow rate.Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Size:DN 15 - DN 50 Pressure:PN 40 Material:Stainless steel 1.4408 Media temperature:-30 °C to +200 °C Application:Gases, vapours, fluids

The ball sector motor valve type 4030 is used in a number of process applications for shut off and control tasks, especially with abrasive, pasty and fibrous fluids. This series is characterised by an extraordinary rangeability of 300 1 and a high flow capacity. Size:DN 25 - DN 300 Pressure DN25 - DN50:PN40, ANSI#300, ANSI#150 Pressure DN65 - DN100:PN25, ANSI#150 Pressure DN125 - DN300:PN16, ANSI#150 Material:Stainless steel 1.4408 / 1.4404 Media temperature:-40 °C up to 220 °C

Highly precise threeway motor control valve for on/off and control with neutral and aggressive media, on request with failsafe option. Whitworth pipe thread NPT thread Positioner electronics, limit switch, position feedback All control actuators are also available with fail safe feature. Different control functions such as distributing and mixing function Degreased version, Silicon or PTFEfree version … Size:DN 15 - DN 50 Pressure:PN 40 Material:Stainless steel 1.4408 Media temperature:-30°C to +200°C Control force:2kN, 5kN Motor voltages:24 V AC/DC, 230 V, 110/120 V Control:3-point; (0)2-10V; (0)4-20mA Application:Gases, vapours, fluids Protection class:IP 67

Angle seat motor valve for on/off and control operation with neutral and aggressive media. Universal actuator configurations with flexible accessories. Whitworth pipe thread NPT thread Welding ends Triclamp connection Special connections Pressure balanced version Degreased version, Silicon or PTFEfree version … Size:DN 15 - DN 80 Pressure:PN 16, PN 40 Material:Stainless steel 1.4408 Bronze 5 (Rg 5) Media temperature:-30 °C to +200 °C Accessories:Integrated positioner (positioner electronics) Limit switch Thrust:0.45 kN, 0.9 kN, 2.0 kN Voltages:230 V - 50 Hz, 110/120 V - 50/60 Hz Application:Gases, vapours, fluids Protection class:IP 43, IP 65

The reinforced version of the type 8035 sliding gate motor valve features a failsafe mechanical spring return. It is ideal where mechanical failsafe options are contained within the specification, e.g. steam and district heating systems. Metal bellows Position electronics Analog stroke feedback Limit switch Fail safe feature Control actuators or 3point actuators Thrust 1.2 kN; 3 kN Voltage 230 V AC, 24 V AC, 110/120 V AC Size:DN15 - DN250 Pressure:PN 10/40, PN100, ANSI #150, #300, #600 Stainless steel:Body 1.4408 / 1.4581, Cover 1.4404 / 1.4571 Carbon steel:Body 1.0619 / 1.0570, Cover 1.0570 / 1.4404 Media temperature:-60 °C up to 350 °C Connection:Wafer type design Protection class:IP 54 optionally IP 65

The hightemperature sliding gate control valve type 8024 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . . Size:DN 15 - DN 250 Pressure:PN 10/40, ANSI #150, #300 Stainless steel:Body 1.4408 / 1.4581, Cover 1.4404 / 1.4571 Media temperature:-60 °C up to 530 °C Connection:Wafer type design