Produse pentru • i (447)

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 2 in 90 cm Länge, in verschiedene Breiten und diversen Farben.. Mindestmenge: 300 Stück Verfahren:2-farbig bedruckt im Siebdruck Band:flaches Polyesterband 900 x 25 mm Accessoires:Drehkarabiner LA-05

Lubrication of slow-running rolling and friction bearings, rollers, transport chains or sliding surfaces on kiln trolleys, bakery machines, drying tunnels, foundry machines, boiler firing systems, plastics processing machines for welding and soldering machines etc. Advantages and benefits Highly effective due to optimum temperature-stable silicone grease formula Excellently suited for grease lubricating points subject to high-temperature loading Broad range of uses outside normal grease performance areas Operating temperature:-20 °C → +290 °C NLGI grade:2 DN factor (dm x n):75,000 mm/min Base oil viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):2,100 N

Pins oder Anstecker werden bedruckt, geätzt oder geprägt. Jedes Motiv ist Herstellungsverfahren bedingt umsetzbar. Standardmäßig mit Dorn und Schmetterlingsverschluss. Mindestmenge: 100 Stück Verfahren:geprägt und 2-farbig emailliert in Hartemaille Material:Kupfer Größe:29 mm Plattierung:silberfarben vernickelt

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Operating temperature:-30 °C → +180 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):440 mm²/s Four-ball test rig (welding load):2,600 N

Corrosion protection of metal semi-finished products and spare parts during transportation and storage Temporary storage of forms, machines and tools in production and maintenance Advantages and benefits Environmentally friendly VOC-free product on a water base Workplace-friendly and not detrimental to health, since emissions (vapours) from volatile organic compounds do not arise during application Setting of the layer thickness for optimal corrosion protection through dilution with water possible In case of mass coating, pre-heating of the parts to accelerate drying possible Dry wax film fast to handling Can be removed easily with warm water and water-based cleaners, such as OKS 2650 Good adhesion on metal surfaces Neutral with respect to most plastics and paints Operating temperature:-40 °C → +70 °C Salt spray test:> 1.000 h with > 30 µm layer thickness Layer thickness:> 30 µm

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Modern active cleaner on the basis of a solvent mixture Highly effective due to actively cleaning substances Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period No formation of condensate on the material surface OKS 2610 is suitable for use with the OKS Airspray system Density: (20 °C):0.75 g/ml Viscosity (40 °C):< 76 mm²/s

Coating of threads of aluminum alloys, high-alloyed, galvanized and austenitic steels to reach controlled friction values during assembly and facilitate thread forming Prevents cold-fretting Advantages and benefits Economical through low consumption (can be diluted with tap water) The coating can be checked easily through a fluorescent ingredient Tools and containers can be cleaned with water Does not contain any toxic components and is therefore sanitary harmless The water-soluble ingredients are biodegradable, the water-nonsoluble ingredients are ecologically neutral Forms a colourless, adhesive and tackfree sliding film after drying Includes an inhibitor, which prevents corrosion during the drying Operating temperature:up to +70 °C Thread friction (M10/8.8):µ total = 0.06 - 0.15

For cleaning and care of metal surfaces Dismantling rusted-in parts Protects electrical contacts Temporary corrosion protection for bare metal surfaces Elimination of squeaking noises Lubrication of friction points at moving machine parts Advantages and benefits Broad range of uses (6-fold action) Highly effective due to very good creep properties Also infiltrates strong oil and greasy soiling Good lubricating properties thanks to high oil percentage Displaces moisture Also available as spray version OKS 601 Operating temperature:-30 °C ➝ +60 °C/150 °C Density (20 °C):0.81 g/ml Base oil viscosity (40 °C):approx. 3 mm²/s Salt spray test:> 50 h Coefficient of friction SRV:µ = 0.09

For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, rotary barrel mixers, ball mills, rope winches or friction presses also for guiding elements, slide bars, heavy transport chains and closed wire ropes Lubrication of rotating assemblies of convertors, cranes, crushers and dredges with spray or central lubricating systems Lubrication of heavily loaded gear couplings Advantages and benefits Most suitable for reliable supply of open gears, even at high circumferential speed Very efficient through EP additives in association with a specific combination of solid lubricants and adhesive additives Reliable protection of tooth flanks, even at high temperatures and with extended relubrication time Good pressure resistance of the lubricating film, excellent wear protection The film is not embrittling and aging. Without bitumen, solvent, does not contain heavy metals Operating temperature:-30 °C → +220 °C NLGI grade:0 Base oil viscosity (40 °C):1,000 mm²/s Four-ball test rig (welding load):approx. 6,500 N FZG damage level:power level > 12

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering Protected parts retain their decorative appearance, as no surface discolouration occurs Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties with lasting water-repelling effect Excellently suited for producing non-slip dry, greenish protective films Outstanding corrosion and oxidation protection with lubricating effect No removal prior to commissioning, as compatible with all lubricants Waterproof and resistant to weathering, suitable for all climate zones Can be welded without degreasing Easily removable before coating Operating temperature:-40 °C → +70 °C Salt spray test:> 1,000 h with 50 µm layer thickness Layer thickness:approx. 10 µm for one-time application

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):50 mm²/s

Kurze Lanyards sind Bänder, an deren beiden Enden Dinge befestigt werden können. Eine Seite kann an einer Gürtelschlaufe oder am Rucksack angebracht werden. An der anderen Seite können beliebige Dinge befestigt werden. Dazu dienen ein Karabiner und ein (Schlüssel-) Ring. Das Band kann bedruckt oder mit einem Weichgummi-Label versehen werden. Mindestmenge: 300 Stück Verfahren:mit 2-farbig aufgenähtem Weichgummi-Label auf 2 Ebenen Band:flaches Polyesterband, 20 mm breit Accessoires:großer Karabinerhaken und Schlüsselring

Lubrication of closed toothed gearing Liquid lubrication of chains, joints, guides, rolling and friction bearings Suitable for immersion-bath, immersion-bath circulation and injection lubrication Advantages and benefits NSF H1 registered Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, disinfectants and cleaning agents Wide operating temperature range Shear-stable and low-foaming Good wear protection Good corrosion protection Long economic operating times MOSH-/MOAH-free Operating temperature:-25 °C → +120 °C Density (20 °C):0.86 g/ml Viscosity (40 °C):680 mm²/s FZG damage level:power level > 12

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist OKS 390 is suitable for use with the OKS Airspray system Also available as spray version OKS 391Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals. Density (20 °C):0.87 g/ml Viscosity (40 °C):22 mm²/s

Parting agent for casting, injection moulding, blow moulding and extrusion processes of plastics and elastomers Prevents sticking, for example of excess adhesive and sealant Eliminates creaking and squeaking noises when surfaces made of plastics, elastomers and metals rub on each other For easy fitting of plastic and rubber profiles, e.g. in door and window construction Lubricant for cutting edges of paper, cardboard, veneer or textile machines, etc. Advantages and benefits NSF H1 registered Highly effective due to outstanding surface wetting and formation of separating film with antistatic properties Broad range of uses for long-term lubrication, protection, care and impregnation of material surfaces made of metal, plastic and rubber Minimal consumption through formation of extremely thin films Resistant to water and weathering Long spray tube for precision application MOSH/MOAH-free Operating temperature:-50 °C → +200 °C

Lubrication of all kinds of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements Surface separation of temperature-stressed threaded connections For stainless-steel connections Advantages and benefits Broad field of application Good wear and corrosion protection Prevents burning-on and cold welding Good pressure absorption capacity No classification marks according to (EG) No. 1272/2008 Prolonged lubrication effect Metal-free For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste to the head or nut contact surface and to the thread. The paste also acts as a sealant against spray water and condensate. Do not use paste instead of grease and mix only with suitable lubricants. Operating temperature:-30 °C → +100 °C/+1,400 °C (lubrication/separation) Four-ball test rig (welding load):3,400 N Thread friction (M10/8.8):µ total = 0.13

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water Duolabel Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants. Operating temperature:-10 °C → +180 °C Density (20 °C):0.88 g/ml Viscosity (40 °C):14 mm²/s

3D Epoxy-Labels, Doming 3D-Aufkleber und 3D-Sticker werden bedruckt im Sieb- oder Offsetdruck auf verschiedenen Basisfolien (Weiß, Gold glänzend, Gold Matt, Silber glänzend, Silber matt). Offsetdruck nur auf Weiß möglich. Kleinmengen im Digitaldruck. Das Druckbild wird mit einem Epoxydharzüberzug versiegelt. Mindestmenge: 100 Stück im Digitaldruck ab 300 Stück im Siebdruck (größenabhängig) ab 1000 Stück im Offsetdruck (größenabhängig) Verfahren:4-farbig bedruckt im Siebdruck Basisfolie :Silber glänzend Größe:50 mm Durchmesser

Lubrication of roller and plain bearings as well as of threaded spindles, gearwheels, worms and similar components Lubrication of spindle bearings in machine tools Advantages and benefits Allows high machine service lives due to low-wear operation and low lubrication frequencies Outstanding resistance in a wide temperature range, at high stresses and surface slide speeds as well as at vibrations Resistant to cold and hot water Excellent wear protection For highest effectiveness carefully clean the lubrication point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling a bearing for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing, high-speed bearings (DN value above 400,000) up to about 1/4. Low-speed bearings (DN value below 50,000) and their housings should be filled completely. Operating temperature:-40 °C → +140 °C NLGI grade:2 DN factor (dm x n):800,000 mm/min Base oil viscosity (40 °C):50 mm²/s Four-ball test rig (welding load):3,400 N

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences MOSH/MOAH-free NSF H1-registered Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):1,000 mm²/s

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible Density: (20 °C):0.725 g/ml

Lubrication of rolling bearings at operating temperatures of -50°C to +180°C For long-term lubrication of temperature-stressed electric motor bearings, e.g. in household appliances or of bearings which are to start up easily at low temperatures Initial lubrication of roller bearings, such as ball bearings that are open, closed on one side, or sealed off on both sides Advantages and benefits Broad range of uses outside normal grease performance areas Reduces wear and friction High resistance to oxidation Wide operating temperature range and good low-temperature properties Very good corrosion protection Very good compatibility with most plastics and elastomers Operating temperature:-50 °C → +180 °C NLGI grade:2-3 Base oil viscosity (25 °C):200 mm²/s

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Operating temperature:-50 °C → +100 °C Density (20 °C):0.84 g/ml Viscosity (40 °C):17.5 mm²/s

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1-registered MOSH/MOAH free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

Mounting paste for press-fitting wheels, shafts, tires or bearings to prevent galling Non-stick primer coat for moving threads, supports, guides and slideways to prevent stick-slip effect Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties In non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Against seizing, wear and stick-slip Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Resistant to water, oil, grease, chemicals and hydraulic media Improved performance due to organic molybdenum complex compounds For best adhesion, clean the surfaces from dirt and other lubricants. Best way is to clean mechanically first Operating temperature:-35 °C → +450° C Press-fit:µ = 0.09, no chatter Four-ball test rig (welding load):2,400 N

Lubrication of friction and rolling bearings of all kinds at all permissible speeds and subject to high pressure loads, in particular of heavily loaded rolling and taper roller bearings, e.g. on rolling stands, hot and cold shearing systems, sliding blocks and spindles Advantages and benefits Excellently suited for long-term lubrication of grease lubricating points subject to heavy loading Highly effective due to outstanding EP additives and high resistance to water Operating temperature:-20 °C → +120 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):185 mm²/s Four-ball test rig (welding load):2,600 N

Dry and clean protective film fast to handling on a wax basis for metals that can be removed easily and protects against corrosion reliably up to two years. Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere) Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties Outstanding corrosion and oxidation protection No degreasing prior to commissioning required, as compatible with all lubricants Waterproof and resistant to weathering Suitable for all climate zones No surface discolouration Operating temperature:-40 °C → +70 °C Salt spray test:1,000 h with 50 µm layer thickness Layer thickness:approx. 10 µm for one-time application

Lubrication of parts subject to high levels of stress such as plain, roller and rod-end bearings, spindles and guideways Advantages and benefits Highly suitable for high-stressed lubrication points Highly effective caused by optimal combination of components Saving of maintenance and lubrication costs by reducing downtimes and corrective maintenance Reduction of down times due to wearFor highest effectiveness, carefully clean the lubrication point, for example with OKS 2610 or OKS 2611 universal cleaner. Before filling for first time, remove anticorrosion agent. Fill bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50 000) and their housings should be filled completely. The bearing and machine manufacturer´s instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Operating temperature:-30 °C → +120 °C NLGI grade:2 DN factor (dm x n):300,000 mm/min Base oil viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):3,600 N

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 2 in 90 cm Länge, in verschiedene Breiten und diversen Farben.. Mindestmenge: 300 Stück Verfahren:4-farbig bedruckt im Siebdruck Band:flaches Polyesterband 900 x 25 mm Accessoires:Drehkarabiner LA-05

Lubrication of chains and machine elements operated outdoors Multi Oil also at higher temperatures Advantages and benefits Good lubricating properties Good creep capacity Biodegradable VOC-free Can be used up to 160°C Silicone-free Percentage of renewable raw materials > 90% Spray version OKS 8601 Operating temperature:-5 °C → +160 °C Density (20 °C):0.92 g/ml Viscosity (40 °C):35 - 40 mm²/s