Produse pentru • i (569)

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Operating temperature:-30 °C → +180 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):440 mm²/s Four-ball test rig (welding load):2,600 N

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Highly effective due to actively cleaning substances Modern cleaner on a solvent base Fast and residue-free evaporation of the cleaner OKS 2660 is suitable for use with the OKS Airspray system Also available as spray version OKS 2661 Density: (20 °C):0.725 g/ml

Gearbox lubrication of heavily loaded, relatively slow-running toothed gearing when grease is used instead of oil due to leaks For heavily loaded and impact-loaded drives Chain lubrication, e.g. of hollow-pin chains in the conveyance and transport sector, for exposure to water and steam and at higher operating temperatures Bearing lubrication of friction and rolling bearings in annealing yards and drying systems, manipulators and robots, cooling-bed and conveyor systems, machines in food packing industry, steam sterilisers etc. Advantages and benefits Excellently suited for corrosive operating conditions with high operating temperatures and high pressure and impact loads Economical due to optimised formula Enables wear reduction, decreasing failure times and enabling long-term lubrication Long-acting, highly adhesive, temperature-stable and waterproof, noise-damping, impact and pressure resistant Operating temperature:-10 °C → +160 °C NLGI grade:1-2 DN factor (dm x n):300,000 mm/min Base oil viscosity (40 °C):490 mm²/s

Assembling screw threaded connections subjected to high temperatures and corrosive influences Screwed connections at pipe fittings, flange joints and fittings in superheated steam lines Combustion chamber screwed connections and mounting bolts of gas and oil burners Screwed connections at combustion engines, exhaust systems, silencers and exhaust gas pipe connections Advantages and benefits Allows reliable non-destructive dismantling even after longer operating period under high operating and ambient temperatures Provides an optimal ratio of screw pretension and tightening torque Electrically conductive To achieve optimal adhesion clean the thread or the sliding surface first mechanically and then with OKS 2610/OKS 2611 universal cleaner to remove soiling as well as any lubricant residues. Use a brush, spatula or similar to apply a sufficient amount of paste to the head or nut contact surface and to the thread. Spray on evenly OKS 241 spray. The paste will also act as a sealant. Operating temperature:-30 °C → +200 °C/+1,100 °C Press-fit:µ = 0.12, no chatter Four-ball test rig (welding load):2,800 N Thread friction (M10/8,8):µ total = 0.09

Dry lubrication for applications where pastes or powders have been used up until now Chain lubrication of heavily loaded chains in temperature ranges in which oil or grease lubrication is not possible For example, in annealing, stoving and baking ovens for aluminium tube manufacturing, in painting systems or in baking lines Advantages and benefits Hygienically harmless as defined in German LFGB Approved by Nuremberg LGA for use in food processing technology NSF H2 registered Economical due to low consumption Optimum wear protection at high pressures and extreme temperatures Can be mixed with water in ratio of up to 1:5 Operating temperature:-35 °C → +600 °C Press-fit:µ = 0.12, no chatter

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible Density: (20 °C):0.725 g/ml

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 1 in den Längen 90 cm und 120 cm, schmal oder breit in diversen Farben. Mindestmenge: 300 Stück Verfahren:2-farbig bedruckt im Siebdruck Band:Schlauchband 900 x 12 mm Accessoires:Drehkarabiner LA-05, Kugel LA-12, Metallkrempe

Lubrication of chains, hinges, joints, clamping and drying frames, and slideways at higher temperatures For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Non-contaminating liquid lubricant for higher temperatures Highly effective due to optimum wear protection, outstanding oxidation behaviour and good creep properties Absolutely resistant to water and steam, inert with respect to acidic media Outstanding adhesion and lubrication effect with no tendency to drip and no formation of hard residues For best results clean the cold surface, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply sufficient amount onto the lubrication areas with brush, dip oiler, dipping or suitable automatic lubrication systems. Let excess drip off and let product affect before the beginning of operation. Instructions of the machine manufacturer have to be considered. Relubrication period and amount should be stated Operating temperature:-25 °C → +250 °C Density (20 °C):0.91 g/ml Viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):2,000 N

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Operating temperature:-10 °C → +250 °C Density (20 °C):0.90 g/ml Viscosity (40 °C):270 mm²/s Four-ball test rig (welding load):2,400 N

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):500 mm²/s

Removes strongly adherent organic residues as well as coverings of nicotine, fat, silicone and rubber wear Suitable for in- and outdoor application Cleans aluminium and stainless steel parts, plastics, glass, chrome and rubber For the manifold application in the section of gastronomy, office and automotive, for hobby and sport equipment like e.g. kitchen furnishing, bars, mirrors, window glasses and frames, glass surfaces, tiles, china, screens, machine housings, boats, caravans, surfboards, bikes, polycarbonate screens and acryl glass, visor of helmets, windscreens, lights, a.s.o. Advantages and benefits Easy application and through the active cleaning foam ideal suitable for vertical areas, no expiration Cleans material-gentle and without leaving stripes or streaks behind Does not attack paints, rubber or plastic and acts colour-refreshing Pleasant, citric like odour, eudermic Free from toxic substances like chlorine, CFC, PCB Silicone free Suitable for acryl-glasses Density: (20 °C):0.92 g/ml

Drop lubrication of cutting tools at machining work on ferrous and non-ferrous metals, for example during drilling, thread cutting, sawing, milling, punching and nibbling Advantages and benefits Reduces friction and required force Permits high continuous load and higher cutting speeds Allows optimal cutting surfaces Extend tool lives through reduction in wear Neutral behaviour toward machine coatings Free of chlorine and heavy metals Low tendency to form oil mist Apply a sufficient quantity of OKS 390 to the tool or machining point using a brush, drip oiler or oil can. Spray on sufficiently OKS 391 spray. After use OKS 390 can be removed with OKS 2610/OKS 2611 universal cleaner. Caution: Check compatibility before using on non-ferrous metals. Density (20 °C):0.87 g/ml Viscosity (40 °C):22 mm²/s

Revers-Nadeln werden nach den gleichen Herstellungsverfahren wie Metall-Ansteck-Pins produziert. Als Befestigung dient eine Reversnadel mit Sicherungskappe. Mindestmenge: ab 100 Stück Verfahren:2-farbig bedruckt im Siebdruck mit Epoxydharzüberzug. Lorbeerkranz im Spritzgussverfahren hergestell Material:Messing (Pin) Lorbeerkranz (Metallguss Legierung) Plattierung:Gold plattiert

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 5 mit bedrucktem Satinband in 20 mm Breite, in verschiedene Längen und diversen Farben. Das Band wird zusätzlich mit einem Klippverschluss ausgestattet. Mindestmenge: 300 Stück Verfahren:1-farbig bedrucktes Satinband im Siebdruck Band:flaches Polyesterband mit aufgenähtem Satinband Bandbreite:20 mm (Polyesterband) 16 mm (Satinband) Accessoires:Karabiner Egg LA-20, Metall/Kunststoff-Klippschließe LA-07

For sliding properties improvement of machine parts, apparates and precision machinery, especially for microfinished surfaces For incorporation in plastics, sealings, packages, sintered metals and improvement of sliding properties For long-term or possibly lifetime-lubrication Advantages and benefits Reduces friction and wear in a wide temperature range High effectiveness due to high affinity of MoS₂ to metals Low friction at highest load capacities Low consumption based on forming of extreme thin sliding films Not electrically conducting and not magnetic Chemically stable except against halogenated gases, concentrated sulphuric- and nitric acidFor best adhesion, clean sliding surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Apply on small parts in series production by tumbling, under addition of small amounts powder and tumbling parts, until a complete MoS₂ film is formed. Brush the powder onto bigger surfaces. Operating temperature:-185 °C → +450 °C Particle size:2.5 - 5.0 µm, max. 15 µm

Lanyards sind coole Bänder zum Umhängen, an dessen Ende ein Ausweis, Schlüssel, Eintrittskarten etc. eingehängt werden können. Zur Befestigung stehen verschiedene Accessoires zur Auswahl. Erhältlich ist das Lanyard Modell 4 mit bedrucktem Satinband in 20 mm Breite, in verschiedene Längen und diversen Farben. Mindestmenge: 300 Stück Verfahren:2-farbig bedrucktes Satinband im Siebdruck Band:flaches Polyesterband mit aufgenähtem Satinband Bandbreite:20 mm (Polyesterband) 16 mm (Satinband) Accessoires:Drehkarabiner LA-05, Sicherheitsverschluss LA-15

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering Operating temperature:-60 °C → +100 °C Thread friction:µ total = 0.08 - 0.10

For loosening and restoring the usability of rusted threads such as screws, turnbuckles, spindles and stud bolts For removing rust from metal surfaces For removing flash rust and rust stains For cleaning metallic encrustation and oil residues Advantages and benefits Chemical reaction – actively breaks down or dissolves rust layer Environmentally friendly formula – ecologically harmless in use Does not contain petrol or mineral oil – workplace-friendly Low evaporation rate – enhanced effect through longer exposure time

Highly adhesive lubrication of moving parts, e.g. valve spindles, piston rods, wire cables, drag cables, drive and conveyor chains, hinges and guides, at highly corrosive conditions in food processing technology Temporary corrosion protection of ferrous and non-ferrous metals, in particular in highly corrosive atmospheres, such as industrial atmospheres, outdoor weathering under roofs of semi-finished products and finished products Shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions Advantages and benefits Highly adhesive oil with very good creep and lubrication properties Optimal corrosion protection through high effectiveness of the corrosion protection additive After the solvent has dried, forms a transparent, highly adhesive oil film Contains non-ferrous metal deactivator NSF H1-registered Also available as spray version OKS 3601 Operating temperature:-40 °C → +80 °C Density (20 °C):0.81 g/ml Viscosity (40 °C):> 21.5 mm²/s Salt spray test:> 100 h

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free OKS 1600 is also suitable for use with the refillable Airspray system Also available as spray version OKS 1601 Density: (20 °C):0.98 g/ml

Removing of dirtiness, solving and dissolving of sugar crusts in the candy industry Lubrication of rocker arms, chain joints, spindles, sensors and claws at wrapping and packaging machines, thin foil and tablet machines Food save lubricant for deep drawing and shaping Advantages and benefits Free from animal fats and dairy products for the candy, beverage and pharmaceutical industry Good wear protection and corrosion prevention Sanitarily harmless according to german LFGB The ingredients are accepted according to the FDA regulation 21 CFR 178.3570 NSF H1 registered Cost effective through rapid dissolving of sugar crusts All-purpose oil because of its good cleaning and lubrication properties Reduces abrasion and allows extended maintenance periods MOSH/MOAH-free Operating temperature:-5 °C → +80 °C Density (20 °C):1.06 g/ml Viscosity (40 °C):20 - 24 mm²/s

Extreme-temperature grease on the basis of perfluorinated polyether oils (PFPE) for use in food processing technology at maximum loads and temperatures. Grease lubrication of friction and rolling bearings in the high-temperature range Application, for example at tunnel kiln cars, baking, burn-in and drying furnaces, hot gas units, reaction vessels, boiler plants, roller and conveyor rollers in continuous furnaces, etc. Use at bearing points under influence of chemicals/fuel Advantages and benefits Maximum water and steam resistance Extraordinary resistance to chemicals, for example to solvents, for example benzene, benzol, acetone, trichloroethylene and against inorganic acids, such as sulphuric acid, hydrochloric acid and nitric acid as well as stearic acids, alcohols and halogens Excellent plastic and elastomer compatibility For long-term lubrication of lubrication points subjected to high pressure up to 300°C Operating temperature:-40 °C → +280 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):390 mm²/s Four-ball test rig (welding load):> 10,000 N

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1 registered MOSH-/MOAH-free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Also available as spray version OKS 3711 Operating temperature:-60 °C → +135 °C Density (20 °C):0.80 g/ml Viscosity (40 °C):7.35 mm²/s

Lubrication of highly stressed sliding surfaces, especially at low slip speeds or with oscillating movements, for example with screwed, mating or bayonet connections made of high-alloy steel or non-ferrous metals Surface separation of temperature-stressed threaded connections, for example at combustion engines and turbines Corrosion protection at screws, pins, bolts, flanges, spindles and fits For stainless-steel connections Advantages and benefits Economic product solution for users who previously used a wide variety of pastes Resistant to hot and cold water and also to most acids and lyes Excellent corrosion protection Contains Moₓ-Active for increased performance Metal-free Also available as spray version OKS 2501 NSF H2 registered To achieve optimal adhesion remove soiling as well as other lubricants from the thread and sliding surfaces. Use a brush, spatula or similar to apply sufficient OKS 250 Operating temperature:-40 °C → +200 °C/+1,400 °C (lubrication/separation) Press-fit:µ = 0.10, no chatter Four-ball test rig (welding load):3,600 N Thread friction (M10/8,8):µ total = 0.12

Lubrication of friction, rolling and pivoting bearings, splined shafts, knockout spindles and sliding surfaces of all kinds under normal loads and all sliding speeds common for grease lubrication Supports sealing of bearings and corrosion protection Advantages and benefits Highly effective due to optimum combination of components Good resistance to pressure and water Fewer downtimes and repairs as a result of reduced wearing Resistant to ageing and oxidationFor highest effectiveness, carefully clean the lubrication point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000) and their housings should be filled completely. The bearing and machine manufacturer's instructions should be observed. Operating temperature:-30 °C → +120 °C NLGI grade:2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):110 mm²/s Four-ball test rig (welding load):2,000 N

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451 Operating temperature:-30 °C → +200 °C Base oil viscosity (40 °C):300 mm²/s Four-ball test rig (welding load):2,400 N

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):18 mm²/s Coefficient of friction SRV:µ = 0.08 Wear SRV:0.002 mm³ Salt spray test:> 150 h

Run-in lubrication in combination with oil or grease lubrication Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds Dry lubrication in dusty environment, to avoid adhesions Coating of punching tools Advantages and benefits Highly effective due to good adhesion to prepared substrates Allows a low coefficient of sliding friction also under heavy loading Increased wear protection Radiation and vacuum-resistant Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs Also available as spray version OKS 511 Operating temperature:-180 °C → +450 °C Press-fit:µ = 0.07, no stick-slip

Lubrication of tooth flanks and sliding surfaces of machine elements of all types, for example sliding bearings, slideways, guides, etc. Run-in lubrication of heavily loaded tooth flanks and sliding surfaces Lubrication of jackscrews in the motor vehicle and train technology Cable lubrication Advantages and benefits High effectiveness thanks to graphite share Extremely low friction at highest load Increased operational reliability of moving parts due to run-in-supporting formation of sliding film Minimum consumption due to realisable thin-film lubrication Excellent pressure resistance Waterproof Free of bitumen, solvents, heavy metals and chlorine Operating temperature:-40 °C → +200 °C NLGI grade:1 Base oil viscosity (40 °C):500 mm²/s Four-ball test rig (welding load):4,200 N FZG damage level:power level > 12

aXionClips sind in 11 verschiedenen Grundmodellen verfügbar. Der aXion-Clip wird im Tampondruck direkt bedruckt, individuell nach Ihrer Vorlage 1- bis 8-farbig oder nach 4C Euroskala. 11 verschiedene Ausführungen stehen zur Verfügung: MODELL 1 Max. Druckfläche: 22 x 10 mm MODELL 2 Max. Druckfläche: 20 x 12,5 mm MODELL 3 Max. Druckfläche: 22 x 14 mm MODELL 4 Max. Druckfläche: 22 x 15 mm MODELL 5 Max. Druckfläche: 18 x 18 mm MODELL 6 Max. Druckfläche: 20 x 12,5 mm MODELL 7 Max. Druckfläche: 20 x 20 mm MODELL 8 Max. Druckfläche: 22,5 x 13,5 mm MODELL 9 Max. Druckfläche: 20 x 9,5 mm MODELL 10 Max. Druckfläche: 20 x 16 mm MODELL 11 Max. Druckfläche: 22 x 16 mm Mindestmenge: 2.500 Stück Verfahren:blanko, ohne Aufdruck Material:Federstahl Ausführung:Modell 7