Produse pentru • i (569)

Grease lubrication of friction and rolling bearings at low operating temperatures Grease lubrication of friction and rolling bearings at high speeds Grease lubrication of bearings with low coasting moments or low bearing play Advantages and benefits NSF H1 registered Low-viscosity, fully synthetic base oil ensures the functionality of the lubricating film up to -70°C Very good conveying capability in central lubricating systems also at low temperatures Clean the surfaces for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing Operating temperature:-45 °C → +120 °C NLGI grade:1 DN factor (dm x n):800,000 mm/min Base oil viscosity (40 °C):30 mm²/s

Maintenance oil for dismantling, lubrication and care of machine elements and metal surfaces. Dismantling of all seized or sticky components or machine elements, e.g. door locks, hinges, screws, bolts, bushings, cranks, linkages, valves, slide rails, cable pulls, shafts, etc. Lubrication of fine-mechanical instruments, measuring instruments, office and computer equipment etc., even at low temperatures Advantages and benefits Highly effective due to ideal combination of mineral oil and additives with solvent Broad range of uses in the complete maintenance sector Displaces moisture, protects against corrosion Cleans, maintains and lubricates Gets under rust Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.82 g/ml Viscosity (40 °C):3 mm²/s Coefficient of friction SRV:µ = 0.11 Wear SRV:0.003 mm³ Salt spray test:> 100 h

Protection of pipes and channels in the whole range of air-conditioning and ventilation technology In the cladding and metal construction, e.g. at railings, bridge parts or supports Advantages and benefits High efficiency through excellent adhesive properties and high resistance of the cured film to impact and scratches Best use as decoration layer of all metallic sur Economically due to low consumption and self-cleaning valve Operating temperature:up to +100 °C Layer thickness:approx. 20 µm for one-time spraying

Grease lubrication of plain and roller bearings with low bearing play as well as bearings with low coasting moments Lubrication for fast-running roller bearings Sealing lubrication of mating surfaces, for example ground-in parts such as taper plugs, dosing plungers and valves Maintenance lubrication of plastic and rubber parts with embrittlement protection and good frictional characteristics, particularly on metal surfaces Advantages and benefits Temperature range from -60°C to 120°C Resistant to all alkali and acid cleaning agents and disinfectants Good wear protection through PTFE NSF H2 registration Operating temperature:-60 °C → +120 °C NLGI grade:2 DN factor (dm x n):1,000,000 mm/min Base oil viscosity (40 °C):approx. 30 mm²/s Four-ball test rig (welding load):2,000 N

Lubrication of friction and rolling bearings, chains, joints or slideways at higher temperatures For conveying systems under radiation heat in painting, stoving and drying systems, travelling grates in firing systems Dry lubrication at temperatures above 200°C Lubrication of elastomers and plastics not resistant to mineral oil Advantages and benefits Highly suitable as a high-temperature lubricant Very effective due to finest, homogeneous MoS₂ distribution in the oil Resistant to water and many chemicals, fuels, lubricants and hydraulic oils For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. If at all possible, avoid excess. Observe the machine manufacturer's instructions. Assess the lubrication frequency Operating temperature:up to +200 °C/+450 °C Density (20 °C):1.01 g/ml Viscosity (40 °C):108 mm²/s Four-ball test rig (welding load):2,800 N

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas Operating temperature:-10 °C → +180 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):220 mm²/s Four-ball test rig (welding load):2,600 N

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Operating temperature:-10 °C → +250 °C Density (20 °C):0.91 g/ml Viscosity (40 °C):4,000 mm²/s Four-ball test rig (welding load):2,200 N

Run-in lubrication in combination with oil or grease lubrication Dry lubrication at sliding pairs, in particular under heavy loads and low sliding speeds, at oscillating movements or intermittent operation Dry lubrication at high operating temperatures (up to 450°C), shorter sliding paths and low speeds Dry lubrication in dusty environment, to avoid adhesions Coating of punching tools Advantages and benefits Highly effective due to good adhesion to prepared substrates Allows a low coefficient of sliding friction also under heavy loading Increased wear protection Radiation and vacuum-resistant Shortens and improves run-in conditions of friction bearings, toothings and other sliding pairs Operating temperature:-180 °C → +450 °C Press-fit:µ = 0.07, no stick-slip

Grease lubrication of rolling and friction bearings, joints, linear drives and chains Lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Lubrication of fittings or machines in dairies, breweries, bakeries, slaughterhouses, etc. Advantages and benefits NSF H1 registered Reduces wear Excellent resistance to oxidation and ageing Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents Operating temperature:-30 °C → +110 °C NLGI grade:2 DN factor (dm x n):400,000 mm/min Base oil viscosity (40 °C):240 mm²/s Four-ball test rig (welding load):2,200 N

Messehemden und Messeblusen für den perfekten Messe Auftritt. Bestickung am Kragen, Bruststick und Oberarm möglich. Wir beraten Sie gerne. Alle Marken, Passformen und Farben erhältlich. Messe Hemden mit Ihrem Firmen Logo besticken lassen. Sorgen Sie für den perfekten Messeauftritt Ihrer Mitarbeiter und statten Sie Ihr Team mit Hemden und Blusen von Top Marken wie OLYMP, ETERNA, Seidensticker oder vielen anderen aus. Alle Passformen, Farben, Armlängen und Kragenarten erhältlich. Die Messehemden können am Kragen, an der Brust und am Oberarm bestickt werden. Wir beraten Sie gerne. Änderungs- und Monogrammservice.

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free Density: (20 °C):0.98 g/ml

Lubrication of rolling and friction bearings subjected to high temperatures, corrosive environmental influences Lubrication of bearing points at furnace, cooling-bed and conveyor systems, motors and hot-air fans that are subjected to temperature stress Suitable for lubricating exhaust-gas fans Advantages and benefits Reduces wear and friction Good corrosion protection Excellent temperature resistance When operating temperature is exceeded, forms only minimal residues Good plastic and elastomer compatibility Good resistance against water influence and aggressive environmental influences For optimum effect, carefully clean the lubricating point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000) Operating temperature:-40 °C → +200 °C NLGI grade:1-2 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):400 mm²/s

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering (tropics, ocean, industrial atmosphere) Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties Outstanding corrosion and oxidation protection No degreasing prior to commissioning required, as compatible with all lubricants Waterproof and resistant to weathering Suitable for all climate zones No surface discolouration NSF H2 registered (only OKS 2100) Also available as spray version OKS 2101 Operating temperature:-40 °C → +70 °C Salt spray test:1,000 h with 50 µm layer thickness Layer thickness:approx. 10 µm for one-time application

Lubrication for thermoforming processes, e.g. drop-forging, hot extrusion, hot rolling or hot bending of steel and non-ferrous metals Thin-film lubrication of sliding surfaces of all kinds on production machines, e.g. column guides of forging presses Advantages and benefits Excellently suited for improving workpiece surfaces and increasing tool service life Highly effective due to optimum solid lubricants with good separating effect Broad range of uses for various thermoforming processes Low consumption due to thin-film lubrication Marked separating and lubricating functions in all temperature phases Free of graphite, which can lead to carburising of tool and workpiece For best adhesion, clean contamination and other lubricants from slide surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaning agent. Use a brush, spatula or similar to apply evenly a suitable quantity of paste onto surface. The paste will also act as a sealant. Operating temperature:-15 °C → +1,150 °C Four-ball test rig (welding load):2,400 N Thread friction (M10/8,8):µ total = 0.09

Sliding coating of materials of all kinds, such as metals, glass, ceramic, wood, leather and plastics As lubricant for threads of all kinds, such as machine screws, thread-cutting screws, sheet-metal and wood screws for increasing pre-tension forces or reducing screw-in torques As dry lubricant for maintenance and care of plastic/metal sliding pairs For assembly of axial face seals or dry lubrication in textile or paper-processing machines Advantages and benefits Highly effective due to outstanding film-forming properties Broad range of uses for dry lubrication in maintenance and care Waterproof and resistant to weathering Operating temperature:-60 °C → +100 °C Thread friction:µ total = 0.08 - 0.10

For cleaning and care of metal surfaces Dismantling rusted-in parts Protects electrical contacts Temporary corrosion protection for bare metal surfaces Elimination of squeaking noises Lubrication of friction points at moving machine parts Advantages and benefits Broad range of uses (6-fold action) Highly effective due to very good creep properties Also infiltrates strong oil and greasy soiling Good lubricating properties thanks to high oil percentage Displaces moisture Operating temperature:-30 °C ➝ +60 °C / 150 Density (20 °C):0.81 g/ml Base oil viscosity (40 °C):approx. 3 mm²/s Salt spray test:> 50 h Coefficient of friction SRV:µ = 0.09

Lubrication of chains, joints and slideways at high temperatures Conveying systems in painting, stoving and drying systems Food-processing machines Advantages and benefits Can be used up to 250°C NSF H1 registered, conforms to the requirements of the Hazard Analysis Critical Control Points (HACCP) method in the food processing industry Good adhesion on metal surfaces Excellent water resistance Excellent oxidation properties Excellent wear protection MOSH/MOAH-free Operating temperature:-10 °C → +250 °C Density (20 °C):0,87 g/ml Viscosity (40 °C):300 mm²/s

Lubrication of heavy loaded toothed gears and worm gears exposed to outdoor conditions and/or low temperatures, as well as tilted or vertical shafts, especially with gear designs which are not oil-tight Lubrication of friction bearings with minimal bearing clearance or high circumferential speeds Advantages and benefits Long-term lubrication due to excellent resistance to oxidation and ageing Wear reduction at maximum loading Prevents leakage with angled or vertical shafts due to good adhesion on metallic surfaces Flowing structure prevents grooving in gear units with continuous coverage of surfaces Operating temperature:-30 °C → +120 °C NLGI grade:0 DN factor (dm x n):600,000 mm/min Base oil viscosity (40 °C):120 mm²/s Four-ball test rig (welding load):3,000 N

Loosening of rusted-on connections such as screws, nuts, levers, joints or locks Non-destructive disassembly of seized or rusted-in parts such as bolts, chain links, springs, valves or hinges Advantages and benefits High effectiveness thanks to gap penetration properties Minimizing of the effort required to loosen seized parts and restoring of mobility Good lubricating properties thanks to MoS₂ Loosened parts are protected against new corrosion forming Eliminates squeaking noises Displaces moisture Operating temperature:-30 °C → +60 °C/150 °C Density (20 °C):0.69 g/ml Viscosity (40 °C):> 3 mm²/s

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants. Operating temperature:-10 °C → +180 °C Density (20 °C):0.88 g/ml Viscosity (40 °C):14 mm²/s

For lubricating machine elements under high loads (also under water influence) Lubrication of chains, joints and guides Lubrication of rolling and friction bearings Lubrication of toothed gearings, fittings, hinges and locks Advantages and benefits NSF H1 registered MOSH/MOAH-free The optimal additives allow good resistance to oxidation and ageing for long operating and durability Resistant to cold and hot water, steam and alkaline and acidic disinfectants and cleaning agents Also available as spray version OKS 3751 Operating temperature:-35 °C → +180 °C Density (20 °C):0.85 g/ml Viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):3,000 N

Coating of pipings and air ducts, firing, boiler and heating systems, tanks, exhaust systems, silencers, light-metal bodies on utility vehicles Repairs to mechanically (stone impact) or chemically (de-icing salt) damaged aluminium rims Shielding of non-metallic materials, e.g. cardboard, wood, glass or plastics etc. Advantages and benefits Excellently suited for sole, decorative corrosion protection Universal protective and decorative coating for all materials Economical due to low consumption and self-cleaning spray valve High covering capacity Fast-drying Operating temperature:-20 °C → +250 °C Salt spray test:> 600 h with 50 µm layer thickness

Modische Hoodies mit Ihrem Firmenlogo besticken lassen ✅ Markenhersteller HAKRO, TRIGEMA, OLYMP, Tommy Hilfiger T-Shirts mit Bestickung ✅ 100% Baumwolle, Bio-Baumwolle, Funktionsgewebe uvm verfügbar Hoodies bedrucken oder besticken lassen - Ihr Corporate Fashion Partner seit 2002 - schnell & zuverlässig

Poloshirts mit Logo für Ihre Mitarbeiter ✅ Bekannte Markenhersteller HAKRO, TRIGEMA, OLYMP, Tommy Hilfiger verfügbar ✅ 100% Baumwolle, Bio-Baumwolle, Funktionsgewebe uvm. ✅ Bestickungen seit 2002 Bestickungen & Logo Druck für Firmenkunden seit 2002 - schnell und zuverlässig - über 2000 zufriedene Firmenkunden

Lubrication of rolling and friction bearings, as well as other machine elements at medium rotating speeds or sliding speeds in a broad temperature range For example, electric motors, drives, control systems and telecommunication and navigation systems under arctic conditions, Bowden cables and brake mechanisms in aircraft, sliding parts in shock-freezing systems etc. Lubricating grease for plastic/plastic and plastic/metal pairs and elastomers For plastic sliding coatings in bridge supports and as a parting agent in plastics processing Advantages and benefits Highly effective due to optimum formula Broad temperature range with a wide range of possible uses Excellently suited for lubricating plastics and elastomers Lubricating grease resistant to ageing, especially at low temperatures Operating temperature:-73 °C → +200 °C NLGI grade:2 DN factor (dm x n):200,000 mm/min Base oil viscosity (25 °C):100 mm²/s Four-ball test rig (welding load):1,200 N

Assembly paste for press-fitting wheels, shafts, tires or bearings Non-stick primer coat for moving threads, guides and slideways to prevent stick-slip effect, seizing and wear Wearing-in lubrication of highly stressed sliding surfaces such as plain bearings, gearwheels, crankshafts with provision of anti-seizing properties Suitable for non-cutting shaping of the difficult type, such as doming, pressing, embossing while avoiding critical metal contacts and welding Advantages and benefits Immediate effective protection against corrosion, wear and stick-slipping under high stress conditions No pressing onto the sliding surface required Highly effective due to the strong affinity of the MoS₂ for metals Extremely low friction at highest loading capability Increased operational reliability of moving parts due to anti-seizing properties Improved performance due to organic molybdenum complex compounds Also available as spray version OKS 221 For optimum adhesion, clean contamination Operating temperature:-35 °C → +450 °C Press-fit:µ = 0.05, no chatter Four-ball test rig (welding load):4,200 N

Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators Lubrication of O-rings and rubber seals for assembly and during operation Lubrication of plastic parts Advantages and benefits NSF H1 registered Tasteless and odourless Highly effective due to excellent adhesion on all materials Neutral behaviour with regard to plastics and elastomers Completely EPDM-compatible High long-term stability without drying out, hardening or bleeding Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol MOSH/MOAH-free Operating temperature:-40 °C → +200 °C NLGI grade:3 Base oil viscosity (40 °C):9,500 mm²/s

For closed gear units and geared motors, plain and friction bearings even at higher rotating speeds, e.g. on filling and packaging machines For joints, propeller shafts and chains when grease lubrication is specified Advantages and benefits Toxicologically harmless as defined in German LFGB Formula in accordance the FDA guideline 21 CFR 178.3570 NSF H1 registered Long operating times due to good resistance to oxidation and ageing Reduced wear due to highly adhesive, load-bearing lubricating film Excellent corrosion protection Low dynamic viscosity enables use with minimal bearing play and gear unit spaces Good pumpability with central lubricating systems Very high resistance to hot and cold water, watery-alkaline and acidic disinfectants and cleaning agents Operating temperature:-45 °C → +120 °C NLGI grade:0-00 DN factor (dm x n):500,000 mm/min Base oil viscosity (40 °C):160 mm²/s

Parting agent at foundry operations injection moulding, blowing and extruding processes of plastics and elastomer Avoids the sticking of e.g. adhesives and sealing excess or water wetting Sliding agent against noisy rubbing of plastics, elastomers and metals together or against each other Lubrication of cutting edges in the paper, cardboard, veneer layer and textile processing machines For easy retracting of plastic and rubber profiles, e.g. in the door and window production Advantages and benefits High efficiency because of excellent netting of the surface and building of extremely thin lubricating films Separating effect with antistatic properties Manifold applications for permanent lubrication, protection, maintaining and impregnation Neutral behaviour against plastic and elastomers Resistant against water and atmospheric influences Operating temperature:-50 °C → +200 °C Density (20 °C):0.96 - 0.97 g/ml Viscosity (25 °C):2,000 mm²/s

For lubricating machine elements under high loads (also under water influence) Lubrication of chains, joints and guides Lubrication of rolling and friction bearings Lubrication of toothed gearings, fittings, hinges and locks Advantages and benefits NSF H1 registered MOSH/MOAH-free The optimal additives allow good resistance to oxidation and ageing for long operating and durability Resistant to cold and hot water, steam and alkaline and acidic disinfectants and cleaning agents Operating temperature:-35 °C → +180 °C Density (20 °C):0.85 g/ml Viscosity (40 °C):100 mm²/s Four-ball test rig (welding load):3,000 N